iTOUCH Wireless Earbuds User manual

Wireless Earbuds Manual
(English)
USER MANUAL VERSION 1.0

iTOUCH WIRELESS EARBUDS USER GUIDE:
Everything you need to know about your iTOUCH Wireless Earbuds
What’s in the box?
Your iTOUCH Wireless Earbuds box includes:
• iTOUCH WirelessEarbuds
(Color may vary)
• Micro-USB Charging Cable
iTOUCH Wireless Earbuds come in
a variety of colors, which are sold
separately.
Specifications
• Bluetooth name: Wireless Buds
• Bluetooth version: V5.0
• Power input: DC 5V
• Power capacity: 3.7V/45mAh
• Working time: 180 minutes
• Supported protocol: SBC/AAC/FHSS
• Sensitivity: 120±3dB
• Frequency response: 20-20000Hz
• Impedance: 32Ω

BASICS
Learn how to best navigate your iTOUCH Wireless Earbuds.
1. Earbuds can power on in either of two ways:
• Simply remove the Earbuds from the charging case to power on each
earbud. When they are both on, the two Earbuds will automatically pair to
each other within a couple ofseconds.
• Pressthebutton oneitherearbudfor2-3secondstopoweroneach one. When
they are both on, the two Earbuds will automatically pair to each other within a
couple of seconds.
2. Powering off your Earbuds:
• Inserting the Earbuds in the charging case will automatically power them off.
3. Bluetooth pairing:
When pairing with a new device, take both Earbuds out of the case. They will both
flash red and bluelight and pair automatically to each other. When they are paired to
each other, the left earbud will flash blue and the right earbud will continue to flash
red and blue to indicate that both Earbuds are paired to each other and ready to pair
with a device.
Make sure your Bluetooth settings are turned on.
The Earbuds will appear as “Wireless Buds” on
your device list. Select this to pair with your device.
Youmay use either of the Earbuds individually
after you’ve paired both Earbuds for the first
time. The earbud not being used can simply be
placed back in the case.

BASICS
Learn how to best navigate your iTOUCH Wireless Earbuds.
4. Charging:
Tocharge your case, plug the micro USB into the case and connect the USB end of
the charging cable to a power source. The LED light will flash RED to indicate the
case is charging. Once the case is fully charged, the LED indicator will show a steady
RED light on the case. This indicates that you may unplug the case from the charging
cable.
To charge your buds, insert both buds into your fully charged case. The LED light
inside the case will appear steady RED and the LED light outside the case will appear
steady BLUE to indicate the buds are inside and charging.
The LED light inside the case will turn BLUE to indicate that your buds are fully
charged. The LED light on the outside of the case can remain blue for several minutes
after the buds are removed.
Learn The Basic Functions of your iTOUCH Wireless Earbuds:
• Click: pla y / pause , ans w er /hang up
• Double click: redial most recent call
• Long press for 2 seconds: next song
• Long press for 5 seconds: poweron/off
Compatibility
Your EarbudsarecompatiblewithvariousapplicationssuchasAppleMusic,
Spotify, and Pandora. However, they may not support other third party
applications.
LED Light Indicator on Earbuds
• Alternately flashing RED and BLUE : Pairingmode
• Flashing BLUE once every 5 seconds: Connected todevice
• Flashing RED : Powering off
LED Light Indicator on Case
• Flashing RED : Case and Earbuds arecharging
• Steady RED : Case and Earbuds are fullycharged
• Steady BLUE : Earbuds are charging in the case

Warnings
• The buds should be stored in a dry and ventilated environment. Avoid contact with oil,
water, other moisture and dust. This can affect product performance.
• Use water to clean the buds, any other liquid may damage the product.
• For optimal use, it isrecommended tokeep your buds within 10 meters of your phone.
• WhenchargingtheiTOUCHWirelessEarbuds,werecommendedusingacomputerto
chargethebuds.Usetheincluded microUSBcableforthesafestandfastest
recharge.
• If you are having trouble pairing your buds, please do not disassemble the buds or
accessories on your own. If you do, the warranty will no longer apply. For more
information please visit us athttps://itouchwearables.com/collections/accessories/prod-
ucts/itouch-wireless-Earbuds or contact customer service at+1-888-200-6081
for personal assistance.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to cor- rect
the interference by one or more of the following measures: • Increase the separation
between the equipment and receiver. • Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. • Consult the dealer or an experi-
enced radio/TV technician for help. Caution: Any changes or modifications to this device
not explicitly approved by manufacturer could void your authority to operate this equip-
ment. This device complies with part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be located or operated in
conjunction with any other antenna or transmitter. * Included Micro USB cable for battery
recharging and file transfer ** Not suitable for showering, bathing, or swimming. Do not sub-
merge.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna must not be located or operated in conjunction
with any other antenna or transmitter.