iWantit iCRIPBT12 User manual

bluetooth clock radio with docking
iCRIPBT12
instruction manual
(iPhone, iPod and iPad not included)
iCRIPBT12_IB_RC_120926_Zell.indd 1 26/9/12 10:49 AM

Contents
unpacking .......................................................................................................................................... 3
product overview ............................................................................................................................ 4
front view...................................................................................................................................................................... 4
top view......................................................................................................................................................................... 4
rear view........................................................................................................................................................................ 5
bottom view................................................................................................................................................................. 5
LCD display window.................................................................................................................................................. 6
remote control ............................................................................................................................................................ 7
operating your remote control...................................................................................................... 8
remote control operation range.................................................................................................... 8
power sources ................................................................................................................................... 9
mains power ................................................................................................................................................................ 9
installing the batteries.............................................................................................................................................. 9
basic operation ............................................................................................................................... 11
powering ON/OFF....................................................................................................................................................11
selecting modes .......................................................................................................................................................11
adjusting the volume..............................................................................................................................................11
setting the clock .......................................................................................................................................................11
setting the alarms ....................................................................................................................................................12
activate/ deactivate alarm timer.........................................................................................................................12
snooze alarm..............................................................................................................................................................12
set sleep timer...........................................................................................................................................................12
radio operation ............................................................................................................................... 13
tuning into stations.................................................................................................................................................13
storing stations automatically.............................................................................................................................13
selecting preset stations........................................................................................................................................13
iPod / iPhone / iPad operation ..................................................................................................... 13
listening to iPod / iPhone / iPad .................................................................................................. 14
charging the iPod / iPhone / iPad.......................................................................................................................14
AUX operation................................................................................................................................. 14
bluetooth operation ...................................................................................................................... 14
pairing Bluetooth-enabled devices...................................................................................................................14
listening to music from the bluetooth device........................................................................... 15
maintenance.................................................................................................................................... 15
hints and tips................................................................................................................................... 16
specications................................................................................................................................... 17
safety warnings............................................................................................................................... 18
iCRIPBT12_IB_RC_120926_Zell.indd 2 26/9/12 10:49 AM

3
If items are missing or damaged, please contact Partmaster (UK only).
Tel: [phone] for assistance.
unpacking
Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so
according to local regulations.
The following items are included:
Thank you for purchasing your new iWantit bluetooth clock radio with docking.
We recommend that you spend some time reading this instruction manual in order that you fully
understand all the operational features it oers. You will also nd some hints and tips to help you
resolve any issues.
Read all the safety instructions carefully before use and keep this instruction manual for future
reference.
The Main Unit
3.5mm to 3.5mm AV Cable Instruction Manual
Remote Control
iCRIPBT12_IB_RC_120926_Zell.indd 3 26/9/12 10:49 AM

4
product overview
front view
top view
1. IR Sensor
Detects signals from the remote
control.
2. LCD Display
Shows the current mode or time.
1 32
3
4
6
5
7
8
10
9
2
1
3. Bluetooth Indicator
• Flashes blue once a second during
pairing mode.
• Lights up solid blue and unit beeps
when paired or connected with a
compatible Bluetooth device.
1. iPod / iPhone / iPad Dock
2. SLEEP Button
Sets the sleep timer.
3. CLOCK Button
Sets the clock time in 12 hour or
24 hour mode.
4. STANDBY Button
Switches the unit between ON and
STANDBY.
5. TUNING Buttons
• Searches the current track.
• Tunes in to a radio station.
• Adjust the time.
6. ALARM 1 / ALARM 2 Buttons
• Sets either the 1st alarm or the
2nd alarm, or both alarms.
• Turns o the alarm(s).
• Views alarm settings.
7. + VOLUME
- Buttons
Adjusts the volume.
8. SOURCE Button
• Selects a media input source: FM
Tuner, AUX, iPod/iPhone/iPad or
Bluetooth.
9. PRESET Button
• Skips to the previous/next track.
• Selects a preset radio station.
10. SNOOZE Button
• Start or pause iPod/iPhone/iPad
playback.
• Switches o alarm temporarily.
iCRIPBT12_IB_RC_120926_Zell.indd 4 26/9/12 10:49 AM

5
rear view
bottom view
You can only use the AC adapter for the power supply.
Batteries (not supplied) are used to remember the clock setting if the mains power is
interrupted.
1 32
1. Mains Power Cable
2. FM ANT
FM Aerial for FM radio reception.
3. LINE IN
Socket for an external media source.
To insert the batteries:
1. Open the battery compartment.
2. Insert 2 x AA 1.5V batteries (not included) with the correct polarities (+/-) as indicated.
3. Close the battery compartment.
• Remove batteries if they are exhausted or will not be used for a long time.
• Batteries contain chemical substances, so they should be disposed of properly,
according to local regulations.
• Risk of explosion! Keep batteries away from heat, sunshine or re. Never discard
batteries in a re.
iCRIPBT12_IB_RC_120926_Zell.indd 5 26/9/12 10:49 AM

6
LCD display window
1. SNOOZE Indicator
2. ALARM 1 Indicator
3. PM Indicator
4. FM Radio Indicator
5. ALARM 2 Indicator
6. iPod / iPhone / iPad Indicator
7. LINE IN / AUX IN Indicator
1
2
3
4
5
6
7
z Z
PM
1
FM
2
iCRIPBT12_IB_RC_120926_Zell.indd 6 26/9/12 10:49 AM

7
9. FM Button
Selects the FM radio mode.
10. BLUETOOTH Button
Selects the Bluetooth source.
11. MENU/DIM Button
• Selects the iPhone/iPad menu
(may not select the iPod menu).
• Adjusts the display brightness:
Dim / Normal / Bright.
12. MUTE Button
Mutes and restores the volume.
13. SLEEP Button
Sets the sleep timer.
14. VOLUME + / - Buttons
Adjusts the volume.
remote control
1. STANDBY Button
Switches the unit between ON and
STANDBY.
2. OK
Conrms selection.
Buttons
• Scrolls up/down.
• Selects a preset radio station.
Buttons
• Searches the current track.
• Tunes into a radio station.
• Adjusts the time.
3. SNOOZE Button
• Starts or pauses iPod/iPhone/
iPad playback.
• Repeats the alarm.
4. DOCK/LINE IN
• Selects the iPod/iPhone/iPad
source.
• Selects an external media
source.
5. CLOCK/PROG Button
• Sets the clock time.
• Displays the clock time.
• Programmes radio stations.
6. S-BASS Button
• Turns on or o super bass
enhancement.
7. P-EQ Button
• Selects a preset equalizer
setting.
8. ALM 1 / ALM 2 Buttons
• Sets 1 or 2 or both alarms.
• Turns o the alarm(s).
• Views alarm settings.
4
5
6
7
2
1
3
8
9
11
12
14
10
13
iCRIPBT12_IB_RC_120926_Zell.indd 7 26/9/12 10:49 AM

8
operating your remote control
The remote control requires a CR2025, 3V Lithium battery
1. Press and slide the battery cover to open the battery compartment of the remote
control.
2. Pull out the battery holder and remove the old battery.
3. Replace with a new battery.
4. Insert the battery holder back into the remote control.
remote control operation range
• The remote control sensor on the front unit is
sensitive to the remote control’s commands
up to a maximum of 5 metres away and within
a maximum of a 60° arc.
• Please note that the operating distance may
vary depending on the brightness of the
room.
Remove the Plastic Strip from the Remote Control
Remove the plastic strip from the battery if the
battery is being used for the rst time. It is located
at the bottom rear side of the remote control.
30° 30°
Max. 5 m
iCRIPBT12_IB_RC_120926_Zell.indd 8 26/9/12 10:49 AM

9
power sources
mains power
Connect the mains cable to the mains
socket on wall.
• Ensure the mains power is switched
on. Your unit is ready to use.
installing the batteries
You can only use the AC adapter for the power supply.
Batteries (not supplied) are used to maintain the unit’s settings if the mains power is
interrupted.
1. Open the battery compartment.
2. Insert 2 x AA 1.5V batteries with the correct polarities (+/-) as indicated.
3. Close the battery compartment.
• Remove batteries if they are exhausted or will not be used for a long time.
• Batteries contain chemical substances, so they should be disposed of properly,
according to local regulations.
• Risk of explosion! Keep batteries away from heat, sunshine or re. Never discard
batteries in a re.
Unplug the unit from the mains
power when not in use.
iCRIPBT12_IB_RC_120926_Zell.indd 9 26/9/12 10:49 AM

10
handling the batteries
• Improper or incorrect use of batteries may cause corrosion or battery leakage, which
could cause re, personal injury or damage to property.
• Install the battery correctly in the battery compartment. Normally the battery’s positive
polarity (+) will face up.
• When the battery is exhausted, the remote control will not function.
• Only use the battery type indicated in this manual.
• Do not dispose of the used battery as domestic waste. Dispose of it in accordance with
local regulations.
• Small button cell batteries such as the one used in the remote control are easily
swallowed by young children and this is dangerous. Keep loose button cells away from
young children and make sure that the battery is secure in the remote control. Seek
medical advice if you believe a battery cell has been swallowed.
Handling the Remote Control
• Be aware of your ngernails when removing the battery cover and the battery.
• Do not drop the remote control.
• Do not allow anything to impact the remote control.
• Do not spill water or liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of excessive
heat.
• Remove the battery from the remote control when not in use for a long period of time,
as corrosion or battery leakage may occur and result in physical injury, and/or property
damage, and/or re.
iCRIPBT12_IB_RC_120926_Zell.indd 10 26/9/12 10:49 AM

11
basic operation
Each enabled stage will be clared in approximately 8 seconds if you do not press any button.
powering ON/OFF
When you rst connect the unit to the mains socket, the unit will be in standby mode.
1. Press STANDBY on the unit or the remote control to switch on the unit. The LCD
display will show the Clock.
2. Press STANDBY to switch the unit back to standby mode.
3. If you want to turn o the unit completely, unplug the mains cable.
If there is no sign under the DOCK, LINE IN or Bluetooth mode, or volume is muted
for 15 minutes, it will automatically switch to STANDBY mode.
selecting modes
• Ensure the unit is in Standby mode before selecting a function.
• Use either SOURCE on the unit, or DOCK/LINE IN, FM, on the remote control to select a
function. The functions will cycle through the following sequence:
FM
BT iPod
LINE
adjusting the volume
• Press VOLUME + / – to adjust the volume.
• If you wish to turn the sound o, press MUTE on the remote control. Press MUTE
again or press VOLUME + / – to resume normal listening.
setting the clock
1. In Standby mode, press and hold CLOCK on the unit or CLOCK/PROG on the remote
control until 24H on the LCD display starts ashing.
2. You can choose between a 12 hour or 24 hour clock. Press or on the unit, or or
on the remote control.
3. Press CLOCK on the unit or CLOCK/PROG on the remote control to conrm the clock
format.
4. When the HOUR digits ash, set the hour using or on the unit, or or on the
remote control.
5. Press CLOCK on the unit or CLOCK/PROG on the remote control to start the MINUTE
digits ashing.
6. Set the minutes using or on the unit, or or on the remote control.
7. Press CLOCK on the unit or CLOCK/PROG on the remote control to conrm the Clock
setting.
iCRIPBT12_IB_RC_120926_Zell.indd 11 26/9/12 10:49 AM

12
setting the alarms
The alarms can be set to sound at two dierent times.
1. Ensure that the clock is set correctly.
2. Press and hold ALARM 1 or ALARM 2 on the unit or press ALM 1 or ALM 2 on the
remote control until 1 or 2 blinks.
3. Press or on the unit, or or on the remote control to the select alarm source
for both alarms.
4. Then press ALARM 1 or ALARM 2 on the unit or ALM 1 or ALM 2 on the remote control.
5. Use or on the unit, or or on the remote control repeatedly to set the hour.
6. Press ALARM 1 or ALARM 2 on the unit or ALM 1 or ALM 2 on the remote control to
conrm. The minute digits will then begin to blink.
7. Set the minutes using or on the unit, or or on the remote control.
8. Press ALARM 1 or ALARM 2 on the unit or ALM 1 or ALM 2 on the remote control to
conrm. The display will show Volume level.
9. To set volume, press or on the unit, or or on the remote control.
10. Press ALARM 1 or ALARM 2 on the unit or ALM 1 or ALM 2 on the remote control to
conrm. Alternatively, the display will stop blinking automatically.
activate/ deactivate alarm timer
1. Press ALARM 1 or ALARM 2 on the unit or ALM 1 or ALM 2 on the remote control to
view the alarm settings.
2. Repeat step (1) to activate or deactivate the timer. 1 or 2 will appear if the timer
is ON and will disappear if it is OFF.
• To stop the alarm, press either ALARM 1 or ALARM 2 on the unit or ALM 1 or ALM 2 on
the remote control.
• The alarm will continue to repeat daily if it is not deactivated.
snooze alarm
When the alarm(s) sound, press SNOOZE if you want to stop the alarm temporarily. The
alarm will resume 5 minutes later.
To turn o the Snooze fcuntion, press ALARM 1 or ALARM 2 on the unit or press ALM 1 or
ALM 2 on the remote control.
set sleep timer
The clock radio will switch to standby mode automatically after a preset period.
• To activate the timer, press SLEEP repeatedly to select the time period (in minutes).
When the timer is activated, appears.
• To deactivate the timer, press SLEEP repeatedly until OFF appears.
1
iCRIPBT12_IB_RC_120926_Zell.indd 12 26/9/12 10:49 AM

13
radio operation
This unit only receives FM radio station signals.
tuning into stations
• Position the aerial as far away from the TV, VCR or other electronic sources as possible.
• For optimal reception, fully extend and adjust the position of the aerial.
1. Press FM on the unit or the remote control to select the FM tuner.
2. Then press and hold or on the unit, or or on the remote control until Srch
is displayed.
3. The radio will then tune into a station with strong reception automatically.
4. Press and hold or on the unit, or or on the remote control to tune more
stations.
storing stations automatically
You can store up to 20 of your favourite stations to preset stations. This will enable you to
access your favourrite stations quickly and easily.
In FM mode, press and hold CLOCK/PROG on the remote control to store the stations.
selecting preset stations
Select FM mode and then press or on the unit or on the remote control to select a
preset number.
iPod / iPhone / iPad operation
The unit can support the following iPod / iPhone / iPad models.
Type Support Model
iPhone • iPhone 3G/3GS
• iPhone 4/4S
iPod
(with 30-pin dock
connectors)
• iPod touch 1st/2nd/3rd/4th Generation
• iPod nano 1st/2nd/3rd/4th/5th/6th Generation
iPad • iPad
• iPad2
• iPad 3rd Generation
iCRIPBT12_IB_RC_120926_Zell.indd 13 26/9/12 10:49 AM

14
listening to iPod / iPhone / iPad
1. Press SOURCE on the unit and select DOCK or press DOCK/LINE IN on the remote
control.
2. Place the iPod / iPhone / iPad in the dock on the unit.
3. To start / pause/ resume play, press on the unit or on the remote control.
4. To skip a track, press or on the unit or or on the remote control.
charging the iPod / iPhone / iPad
When the unit is connected to a switched on mains power supply, the docked iPod / iPhone
/ iPad will being charging automatically.
• Certain iPod models are not compatible with dock charging.
• Certain iPod/iPhone/iPad models may take up to a minute before the charging indicator
appears.
• If the clock is not manually set, when an iPod / iPhone / iPad is connected, the clock radio
will synchronize the time from the iPod / iPhone / iPad automatically.
AUX operation
The unit supports listening to an external audio device.
1. Press SOURCE on the unit and then select LINE IN or press DOCK/LINE IN on the
remote control for the same function.
2. Connect the cable to the LINE IN socket at the rear of the unit and the AUDIO OUT
jack to the external device.
3. You can now playback track on the external audio device.
bluetooth operation
You can listen to tracks from a media device if it is connected to the unit via Bluetooth.
pairing Bluetooth-enabled devices
• The operational range between the unit and the device is approximately 10 metres.
• Before connecting a Bluetooth device to the unit, ensure you know the device’s capabilities.
• Compatibility with all Bluetooth devices is not guaranteed.
• Obstacles between the device and the unit can reduce operational range.
• Keep the unit away from other electronic devices that may cause interference.
iCRIPBT12_IB_RC_120926_Zell.indd 14 26/9/12 10:49 AM

15
To connect your device to the unit via Bluetooth, follow the steps below:
1. Press SOURCE on the unit to select “bt” (Bluetooth) or press on the remote control.
The blue LED next to the display will blink once a second.
2. Turn on the Bluetooth function on your device.
3. Search for other Bluetooth devices, then select “iCRIPBT12”in the pairing list.
4. Enter default password “0000”. Some Bluetooth devices may not require password
pairing.
5. On successful pairing, the unit will beep and the blue LED will light up solidly.
• The device will be disconnected if it is moved beyond the operational range.
• To reconnect the device to the unit return to within operational range.
• When the unit is disconnected from the Bluetooth device it will enter pairing mode
automatically with other Bluetooth devices searching for connection.
listening to music from the bluetooth device
If the Bluetooth device supports Advanced Audio Distribution Prole (A2DP), you can listen
to music stored on the device through the unit.
1. Pair or connect the media device with the unit.
2. Start music playback via the device.
All functions should be operated directly using your media / audio device.
maintenance
Ensure the unit is fully unplugged from the mains socket before cleaning.
• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning uids containing alcohol, ammonia or abrasives.
• Do not spray an aerosol at or near the unit.
iCRIPBT12_IB_RC_120926_Zell.indd 15 26/9/12 10:49 AM

16
hints and tips
If problems arise with your unit, check this list for possible solutions before calling a
qualied service agent. If you cannot solve the problem, or the system has been physically
damaged, call your dealer or a qualied audio engineer.
problem possible / solution
No power • Ensure the AC power plug is connected properly.
• Ensure there is power at the AC outlet.
No sound • Adjust the volume
Poor radio reception • Increase the distance between the unit and your TV or DVD
Timer does work • Set the clock correctly.
• Switch on the timer.
Clock/ timer setting
erased
• Power has been interrupted or power plug has been
disconnected.
• Reset the clock/ timer.
iPod/iPhone/iPad
iPod/iPhone/iPad does
not respond to the
speaker system
• iPod/iPhone/iPad may not be docked properly or installed
properly. Remove your iPod/iPhone/iPad from the dock and
check for obstructions on the connectors in the dock and on
your iPod/iPhone/iPad.
• Make sure that your iPod/iPhone/iPad is working properly
before docking. Please refer to your iPod/iPhone/iPad manual
for details.
The unit doesn’t play
iPod/iPhone/iPod les
or doesn’t function as
expected
• Make sure the iPod/iPhone/iPad is connected properly.
• Standby mode may be activated; press the button on the
unit or the STANDBY button on the remote control again.
• Make sure the iPod/iPhone/iPad is switched on.
• Vibrations may have caused the iPod/iPhone/iPad to come
loose from the docking station.
• Check iPod mode is selected.
• Reinsert iPod/iPhone/iPad.
iCRIPBT12_IB_RC_120926_Zell.indd 16 26/9/12 10:49 AM

17
bluetooth
Music playback is
unavailable after
Bluetooth connection
• The device cannot be used with the unit to play music.
Audio quality is
poor after Bluetooth
connection
• Bluetooth reception is poor. Move the device closer to the
unit and/or remove obstacles between device and unit.
Cannot connect to the
unit
• The device does not support the proles required by the unit.
• The device’s Bluetooth is not enabled. Refer to user manual.
• The unit is not in pairing mode.
• The unit is already connected with another Bluetooth device.
Disconnect that device and try again.
Bluetooth PIN or
password may be
wrong
• Check that PIN or password entry is correct and enter it again.
• If there is no PIN or password entry option, click OK and then
re-pair. The unit will pair with the Bluetooth device on either
the second or third try. On successful pairing, the unit will
beep and the blue LED will light up solidly.
specications
model iCRIPBT12
power supply 100-240V ~ 50/60 Hz
power consumption 20W
radio frequency range FM 87.5 – 108 MHz
dimensions 270 mm (W) x 75 mm (H) x 170 mm (D)
Features and specications are subject to change without prior notice.
iCRIPBT12_IB_RC_120926_Zell.indd 17 26/9/12 10:49 AM

18
safety warnings
• Read all the instructions carefully before using
the unit and keep them for future reference.
• Retain the manual. If you pass the unit onto a
third party make sure to include this manual.
• Check that the voltage marked on the rating
label matches your mains voltage.
damage
• Please inspect the unit for damage after
unpacking.
• Do not continue to operate the unit if you are
in any doubt about it working normally, or if it
is damaged in any way - switch o, withdraw
the mains adapter and consult your dealer.
location of unit
• The unit must be placed on a at stable surface
and not subjected to vibrations.
• Do not place the unit on sloped or unstable
surfaces as the unit may fall o or tip over.
• The mains socket must be located near the unit
and should be easily accessible.
• This unit is designed for indoor, domestic use only.
temperature
• Avoid extreme degrees of temperature, either
hot or cold. Place the unit well away from heat
sources such as radiators or gas/ electric res.
• Do not expose the battery to direct sunlight or
sources of excessive heat.
naked ames
• Never place any type of candle or naked ame
on the top of or near the unit.
moisture
• To reduce the risk of re, electric shock or
product damage, do not expose this unit
to rain, moisture, dripping or splashing. No
objects lled with liquids, such as vases, should
be placed on the unit.
• If you spill any liquid into the unit, it can cause
serious damage. Switch it o at the mains
immediately. Withdraw the mains plug and
consult your dealer.
ventilation
• To prevent the risk of electric shock or re
hazard due to overheating, ensure that
curtains and other materials do not obstruct
the ventilation vents.
• Do not install or place this unit in a bookcase,
built-in cabinet or in another conned space.
Ensure the unit is well ventilated.
safety
• Always disconnect the unit from the mains
supply before connecting/disconnecting other
devices or moving the unit.
• Unplug the unit from the mains socket during
a lightning storm.
• In the interests of safety and to avoid
unnecessary energy consumption, never leave
the unit switched on while unattended for
long periods of time, e.g. overnight, while on
holiday or while out of the house. Switch it o
and disconnect the mains adapter from the
mains socket.
mains adapter cable
• Make sure the unit or unit stand is not resting
on top of the mains adapter cable, as the
weight of the unit may damage the mains
adapter and create a safety hazard.
mains adapter
• The mains adapter will continue to draw
electricity from the mains supply when
plugged in the mains socket. In the interests
of safety and to avoid unnecessary energy
consumption, never leave the adaptor plugged
in the mains socket while unattended for long
periods of time. Disconnect the adapter from
the power supply.
interference
• Do not place the unit on or near appliances
which may cause electromagnetic interference.
If you do, it may adversely aect the working of
the unit, and cause a distorted sound.
batteries
• Batteries used in the unit are easily swallowed
by young children and this is dangerous.
• Keep loose batteries away from young children
and make sure that the battery holder tray is
secure in the unit. Seek medical advice if you
believe a cell has been swallowed.
• Please dispose of batteries correctly by
following the guidance in this manual.
• Do not expose the battery to direct sunlight or
sources of excessive heat.
iCRIPBT12_IB_RC_120926_Zell.indd 18 26/9/12 10:49 AM

supervision
• Children should be supervised to ensure that
they do not play with the unit.
• Never let anyone especially children push
anything into the holes, slots or any other
openings in the case - this could result in a fatal
electric shock.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning ash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the
presence of uninsulated“dangerous
voltage” within the unit’s enclosure that
may be of sucient magnitude to
constitute a risk of electric shock.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the manual
accompanying the unit.
service
• To reduce the risk of electric shock, do not
remove screws. The unit does not contain
any user-serviceable parts. Please leave all
maintenance work to qualied personnel.
• Do not open any xed covers as this may
expose dangerous voltages.
maintenance
• Ensure to unplug the unit from the mains
socket before cleaning.
• Do not use any type of abrasive pad or abrasive
cleaning solutions as these may damage the
unit’s surface.
• Do not use liquids to clean the unit.
iCRIPBT12_IB_RC_120926_Zell.indd 19 26/9/12 10:49 AM

DSGRetailLtd•MaylandsAvenue•HemelHempstead
Herts•HP27TG•England
This symbol on the product or in the instructions means that your
electrical and electronic equipment should be disposed at the end of its
life separately from your household waste. There are separate collection
systems for recycling in the EU.
For more information, please contact the local authority or your retailer
where you purchased the product.
Visit Partmaster.co.uk today for the easiest way to buy
electrical spares and accessories. With over 1 million spares
and accessories available we can deliver direct to your door
the very next day. Visit www.partmaster.co.uk or call 0844 800 3456 (UK customers only)
Calls charged at National Rate.
All trademarks are the property of their respective owners and all rights are acknowledged.
iPhone, iPod and iPad are trademarks of Apple Inc.,
registered in the U.S. and other countries.
“Made for iPod” and “Made for iPhone”mean that an electronic accessory has been
designed to connect specically to iPod or iPhone respectively, and has been certied by
the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and
regulatory standards.
IB-iCRIPBT12-120926V2
iCRIPBT12_IB_RC_120926_Zell.indd 20 26/9/12 10:49 AM