iWoc Standard User manual

iWoc® Standard
End User Manual

bikes

iWoc® Remote (Standard version)
EBIKEMOTION TECHNOLOGIES S. L.
C/ Orfebres, 10 – 34004
(Palencia, Spain)
ebikemotion.com
Remote Control for e-bike
Version 1.1 - February 2017
English Version
E B M D O C 0 3 - A 1

Index 4
1. llustration of iWoc 5
1.1 iWoc® Components Diagram 5
1.2 Icon Interpretation 5
2. Safety Warnings - Read Before Start any Operation 7
3. Product Description, Main Features and Specifications 8
3.1 Intended of Use 8
3.2 Product Features 8
3.3 Components 8
4. General Overview 9
4.1 iWoc® Remote Standard, Connection 9
4.2 iWoc® Remote Technical Data 9
5. Main Operation with eBike 10
5.1 Requirements 10
5.2 Starting (Switching ON/OFF the eBike System) 10
eBike Switching ON 10
eBike Switching OFF 10
Push Assistance Motor power ON/OFF 10
Speed limits for the eBike operation 10
Automatic Switch OFF 11
5.3 Battery Pack Charge control indicator 11
5.4 Walk Mode 11
5.5 Light Control 12
5.6 Setting the Assistance level 12
5.7 Custom Assistance Level 13
5.8 RGB LED Light 13
Initial Check Control 13
Confirmation of Command 14
eBike Status and Error Indication 14
Bluetooth Operation 14
Call Reception 15
Switching Off eBike, Check Control 15
6. Operation and Integration with APP 16
6.1 Bluetooth® Pairing Process with Smartphone 16
6.2 iPhone and Android Bluetooth® BLE pairing process 17
6.3 Bluetooth® Pairing Process with HR Monitor 17
1.3 Main Functions Diagram 6
6.4 Remote control of the ebikemotion® APP by iWoc® 17
Remove the MAIN MENU 17
Change the Monitor between Main Views 18
Change the Monitor view (Aux. Components) 18
Modify the ZOOM level of the Maps 19
Commands if you are listening music 19
Listening to a Voice Command 19
7. Error Code Reference 20
8. Accessories 23
8.1 USB on.wire 23
8.2 GPS Tracker Unit 23
9. Web User Dashboard 24
10. Maintenance and Service 25
10.1 Cleaning 25
10.2 Disposal 25
10.3 Replacing the iWoc® remote 25
10.4 After-sales Service 25
10.5 APP Support 25
EU Declaration of Conformity 26
Terms of Use of Documentation 26
6.5 Smartwatch Integration® 19
8.3 Head and Rear Lights 23
Page 4
Index

iWoc® Standard - Manual
A Power “+” or “-” button - Walk mode control*
B Power “+” or “-” button - Light control*
C On/Off button for eBike and iWoc® remote
D Aux button (APP Control change CONTEXT information in
the screen, voice commands, Play/Pause and Zoom OUT)
E Aux button (APP Control change MAIN information in the
screen, Next Song and Zoom OUT)
1 LED White Lights for eBike power assistance level information
2 LED RGB Lights for status and notification
3 LED White Lights for eBike battery Pack level information
4 Fastening screw for on-board computer
5 Washer for fastening screw
6 Holder for iWoc® remote
7 Protective grommet for communication wire
8 iWoc Remote plug
9 Rubber ring between holder and handlebar*
10 iWoc® Body
10.1 Buttons Panel
10.2 Waterproof Cover
10.3 iWoc® main Board
10.4 iWoc® shell
10.5 Case closing flange
10.6 Decorative Panel (For stickers)
2
5
6
E
D
3
1
B
CA
4
9
10.1
7
10.5
10.2
10.310.6
10.4
Page 5
1.1 iWoc Component Diagram
1.2 Icon Interpretation
?
?
SHORT PRESS “?” BUTTON
LONG PRESS “?” BUTTON
1. ilustrations of iWoc® Standard

Page 6
IMPORTANT
Rubber ring between
iWoc holder and
ebike handlebar
*The iWoc® has one small ring around the case-closing flange. This small rubber
piece is designed to be installed in a 22mm handlebar, close to the grip area. The
compression of the remote, once it has been closed by the screw, leaves the
remote strongly installed. Please keep in mind that THE MAXIMUM TORQUE for
the screw in the remote is 1 NEWTON. More torque could break the screw holder.
iWoc® Standard - Manual
D
2
1
3
E
A
C
B
DD A
3
1
C
9
D2
DE B
9
10.5
IMPORTANT
*Depending on the configuration of the constructor and the position of the
remote on the handlebar, the commands of button A/B and D/E could be
interchanged.
1.3 Main Functions Diagram

Page 7
iWoc® Standard - Manual
2. Safety Warnings
Read before starting any operation
Save all safety warnings and instructions
for future reference.
- Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
- Save all safety warnings and instructions for
future reference.
- The term “battery pack” used in these operating
instructions, regardless of model, refers both to
standard battery packs (battery packs with holder
on the bike frame) and spare-type battery packs
(removable battery packs with holder in the rear
rack/carrier or on the bike frame).
- Make sure not to be distracted by the display
of the on-board computer, remote information and
Smartphone. Failure to focus exclusively on
surrounding traffic may result in an accident.
- Read and observe the safety warnings and
instructions in all operating instructions of the eBike
system
- The iWoc® remote is designed to support water
splashes and riding in the rain under normal
conditions. The design meets IP54 standards for
electrical enclosures. The electronic remote also
includes additional protection such as conformal
coating, and sealed grommets to increase
waterproof features. There are some important points
and considerations for the care of your HIGO remote
that you should keep in mind..
An eBike is similar to a conventional bike, but there are some
components that include critical electronics components,
such as the Motor, Battery and HMI (remotes and display).
There are some basic principles that must be followed to
respect the guarantee and extend the life of your eBike
electronic components:
IMPORTANT
- Do not use immerse the electronic
components in water (Especially with washing
machines). If you are going to use washing machines it is
important that you remove the battery and pack the
HMI system (iWoc® remote). Do not apply pressurized
water to any electronic component.
- Do not leave the eBike parked outside
during winter or extreme rain conditions. The remote is
designed to prevent water from getting inside, but may
be compromised if subjected to these conditions over
an extended period of time.
- Do not leave the iWoc® remote in wet
climate conditions (rain or snow) for a long period of
time
- Remove or protect the remote if you are
going to transport your eBike on your car in rainy
conditions. The travelling speed of the car combined
with the wet weather will increase the risk of breaking
the waterproof protection.
- Keep the buttons of the remote clear of the
dust and mud. If you break the cover ask to your
distributor to replace it. It can be supplied as spare
part.

The iWoc® is designed as a Human Machine Interface
computer to control ebikemotion® propulsion systems
(Motor, Battery Pack, etc.) as well as other specific,
compatible eBike systems such as:
EBIWOCCA: CAN BUS Part Number
- EBIWOCRS: RS485 Part Number
iWoc® Standard is one of the most complex remotes that
ebikemotion® Platform has introduced. The remote includes
7 white LEDs + 1 RGB LED, all of which are able to provide
the user with visual information regarding:
- Battery charging level
- Motor Power level
- Bluetooth status
- eBike status
- eBike control
- Special events (incoming calls, confirmation of
operations, etc.)
The iWoc® Standard wired also includes:
- Bluetooth® BLE module to establish wireless
connection between the remote (eBike) and the
ebikemotion® APPs (end user APP, Dealer APP, etc.).
- eBike control. The ebikemotion® standard remote
includes CAN BUS communication, which allows it to fully
control an eBike that uses the CAN communication system.
Special series of the iWoc® standard designed ad-hoc are
available for some manufacturers and may include other
technology (RS-485 or UART). These models are not
standard and may have some differences and limitations
based in the technology and processors used in the
development, as well as the speed of the SERIAL buses
compared to those using CAN.
- Wired Connection: In order to replace the iWoc®
a special HIGO connector was designed to be placed
outside of the eBike. If there is any problem in the remote,
the iWoc® may be easily replaced without requiring access
to the inner areas of the frame of the eBike
3.1 Intended of Use
3.2 Product Features
iWoc® Standard - Manual
Refer to the beginning of the document to see the
illustrations of the main components. Individual illustrations in
these operating instructions may differ slightly from the
actual device depending on the equipment of your eBike
or new generations of the iWoc® Standard version:
3.3 Components
3. Product Description, Main Features and Specifications
E
D
3
1
B
CA
2
Page 8

Welcome to the ebikemotion® platform. This is the end user
manual for the remote control iWoc®. iWoc is the acronym
for Intelligent Wireless/Wire Operation Control. Within this
family of remote controls there are different versions of
remote:
- Standard (Wired version with 5 buttons and 8 LEDs)
- Wireless
- One (Wired version with 1 button and 1 RGB LED)
- Trio (Wired version with 3 buttons and 1 RGB LED)
Depending on the OEM integration, you can find one of
these models with different functions in your eBike. One of
the most important is the Bluetooth® function based on BLE
(4.1 or 4.2 depending on the version and generation).
The iWoc® remote Standard is normally connected directly
to the eBike using a 6 pin aerial HIGO connector.
This waterproof connector may be placed in different
positions depending on the design of the eBike, but is most
frequently located out of the eBike frame.
The remote connector includes a small protuberance inside
and close to the signal pins. The exterior side also includes 2
arrows that show the point of interconnection of both
connectors (male and female). It is very important to ensure
that the 2 arrows are facing each other when you connect
both plugs.
Element Value
iWoc® Remote Control Standard
Article number (CAN BUS) EBIWOCCA
Article number (Rs485) EBIWOCRS
Operating Temperature C -30 to +85
Storage Temperature C -40 to +85
Humidity % 10 to 90 non-condensing*
Weight, approx. Grs 85 (with connector)
Protection Type IP 54 (Dust and splash
water protected)
Wire Length mm 12
Connection HIGO Mini B Female (6 pin -
Black)
*Most values are limited by the Bluetooth® BLE electronic
components
4.1 iWoc® Remote Standard, Connection
4.2 iWoc® Remote Technical Data
iWoc® Standard - Manual
4. General Overview
Page 9

Remember to start operating your eBike you will need to
check that:
- You have a sufficiently charged Battery Pack inserted
or connected to your eBike. For further information, check
the Battery Pack instructions from your eBike manufacturer.
- The iWoc® Remote wire is properly connected to the
eBike Display bus connection.
5.1 Requirements
iWoc® Standard - Manual
5. Main Operation
eBike Switching OFF
To switch ON your eBike system short press (press once) on
button “C”. You will see that the LED lights on the iWoc®
initiate a sequence while checking the system, and will then
show the status:
Checking Sequence LED lights:
1. Battery LED panel starts to switch on progressively [3]
2. Assist LED panel starts to switch on progressively [1]
a. If everything is okay, RGB LED lights turn
GREEN and switch OFF. Remote shows battery level and
puts assist at level 1
b. If there is something wrong the RGB LED light
turns RED and starts to blink
Remember that the drive will be activated as soon as you
start to pedal. If you activate the “Walk Mode” the drive will
also start to push assistance. You must have any LED light
ON in the power assist LED indicator [1] to push assistance.
Motor assistance will depend on the level selected in the
remote.
To switch OFF your eBike system long press (press and hold)
button “C”. You will see that the RGB LED lights turn green,
blue, red and finally white before switching off. All LED lights
of the remote will switch off and the eBike system will be
OFF.
eBike Switching ON
C
C
5.2 Starting (Switching ON/OFF eBike)
Once the eBike is switched ON you can control the power
assist level of the system to push assistance or not. To control
this feature, use buttons [A] and [B] to increase or decrease
the power of the drive.
Each time you change the power assist you can modify the
power or modify the assistance motor map depending on
the motor controller integration and performance of the
eBike System.
Increased power assist will be represented in the LED power
assist panel with 1, 2 or 3 LED lights ON. If power assist LED
lights are OFF, it means that motor will now push. If LED lights
are blinking, it means that you are running in one special
map, for example CUSTOM MAP, with a special
configuration.
Push Assistance Motor power ON/OFF
A
B
1
B
CA
2
As soon as you have reached a speed of
25 km/h or stop pedalling in normal
operation, the assistance from the eBike
drive is switched off. The drive is
automatically re-activated as soon you
start pedalling again if the speed is below
25 km/h.
Speed limits for the eBike operation
25Km/h
Page 10

iWoc® Standard - Manual
In addition to the LED information system that may be
integrated in your battery pack, the battery charge-control
LED panel indicator (number “3” in the illustration) also
displays the charge level of the eBike battery pack. The
Battery pack information may also be checked in the
ebikemotion® APP with the exact amount remaining, the
capacity, and a detailed prediction of range and riding time
3
The LEDs of the charge-control indicator on the battery will
turn off. The capacity for assisting the drive has been used
up, and assistance is gently switched off. The remaining
capacity is made available for the lighting.
Remember that we use 4 LEDs in the battery Panel to show
the battery level. Between one level and the next one there
is another intermediate level. To indicate this state, the LED
for the higher of the two levels will flash. Please check this
diagram for a full explanation
5.3 Battery Pack Charge control indicator
100%
LED Status from Battery Full to Empty
0%
The eBike battery pack
is fully charged
The eBike battery
pack should be recharged
6Km/h
Walk mode is a special push-assistance
feature of some eBike systems that work
when you walk your eBike (walk alongside
your bike while pushing it). This function will
assist to you but it cannot exceed 6 km/m
(max).
It is really important to remember that this function is
normally designed for when you are pushing the eBike. Do
not use this function if the eBike is not in direct contact with
the ground.
Do not use this function for riding because speed is very low
and you could have an accident. Also keep in mind that
“Walk Mode” will push the drive in all assistance modes,
including “ZERO or no one selected”.
To operate this function you will need to use button “A” of the
remote and keep it pressed. The eBike drive must be
switched on. The Walk mode will be automatically switched
off if:
-Your speed exceeds 6 km/h.
- You release the “A” button.
5.4 Walk Mode
A
If the eBike is not moved and no button on the on-board
computer is pressed for 5 minutes, the eBike system will shut
down automatically to save energy.
Automatic Switch OFF
more than 5 min
Page 11

If your eBike includes factory-installed lights you can control
them using the iWoc® Remote. The manufacturer can include
this function or not, depending on the eBike model. In order
to switch the eBike lights, the iWoc® must be coded to
support it (From factory or dealer network).
The button that controls that function is the “B” button. You
will need to long press (press and hold) that button to switch
on or off the lights. In order to show the user that the lights
are ON or OFF, and to confirm the command to the user, the
RGB light of the iWoc will flash in white each time the lights
are switching.
5.5 Light Control
B
Page 12
iWoc® Standard - Manual
1
B
A
2
If you are using the ebikemotion® APP the user will receive
an alert on the phone to show the change of status of the
lights. An icon will be permanently displayed when the lights
are on.
In the iWoc® CAN version “EBIWOCCA” the brightness of
the remote LED will be modified automatically if the user has
the eBike lights switched on or off.
- eBike lights switched ON means lower illumination in
remote LED
- eBike lights switched OFF means higher illumination in
remote LED
Usually eBikes can push in different power levels. The rider
must adjust the power level of the drive to the push and
distance target needs. A higher more power level will result
in lower range and greater battery consumption.
If there are more than 3 power assistance levels, iWoc® uses
a simple method with a flashing function to show indicate
the intermediate power assistance level to the user. For
example, one flashing LED means 1, two flashing LEDs 2, one
LED ON + one LED flashing means 3, and so on.
To increase and decrease the assistance level, use buttons
“A” and “B”. The eBike manufacturer typically codes the
upper button of the iWoc® to respond as an increase
function and the lower button as a decrease function. (Keep
in mind that the iWoc® is reversible)
5.6 Setting the Assistance level
Depending on the Motor integration of the eBike
manufacturer, you might be able to have different power
level systems:
- One single way to push with more or less power
- Each power level also represents a different way to
push
The iWoc(r) remote will show you each level using the LED
panel “D” that includes 3 LEDs. Most manufacturers include
3 power Assistance levels. iWoc® can support up to six
power levels plus an additional level named CUSTOM
LEVEL. Check your eBike specifications to know the
configuration of your eBike system
Usually eBike Power levels are represented following this
schema:
A
B
LED Status for Assistance Level Information
No power
3
2
1
Custom Map
1

This special motor map is integrated in some eBikes
depending on performance and level of integration with
ebikemotion® Technology. The custom map is a power
assistance map adapted to special needs, for example the
terrain or user preferences. If this feature is available in your
eBike it will have an additional power assistance level.
Once the user reaches the maximum power assistance level
(for example 3), if the UP button is pressed again, the user
will see all the Power panel LED lights blinking, indicating that
the custom map has been activated.
If your eBike includes CUSTOM MAP, check the
ebikemotion® APP to know how to modify the Motor Map.
The Custom Motor Map can be linked with a recorded
activity to recover and install the eBike when you are going
to repeat the same track.
5.7 Custom Assistance Level
IMPORTANT
If you are using the ebikemotion APP, and depending
on the integration of the eBike manufacturer, you can
use the APP to:
- Modify the power supplied by the motor for each
assistance level
Control the maximum power supply the motor offers
- Modify the Motor Map to adapt the way to push for
each level if the eBike integrates ebikemotion® Smart
Motor Controllers.
Custom Map
A
B
Page 13
iWoc® Standard - Manual
RGB LED light [2] is the special rounded light in the middle of
the remote. This LED can represent different colours to inform
the user of a different status or alert the user of any special
event.
5.8 RGB LED Light
The main colours represented by this LED light are: RED,
GREEN, BLUE, WHITE and some combinations such as
ORANGE or PURPLE.
The RGB LED can emit a steady or flashing light.
- Bluetooth Operation
- Call Reception
- Switching Off eBike, Check Control
The functions that iWoc® can represent are:
- Initial Check Control
- Confirmation of Command
- eBike Status and Error Indication
2
RGB LED Main Colors in the Panel [2]
ON, OK and Calls
Bluetooth® Operations
OFF, Errors
Light Status
The Check Control is a special process that asks all
components about the status and reports the current status.
This process is automatically done each time you start the
eBike. At the same time you will see that your remote checks
the operation of all LED lights integrated by switching each
on/off one at a time.
Initial Check Control

Each time you press any button of the iWoc®, the remote will
respond with a confirmation indicating receipt of the
command. To do so the RGB LED [2] of the iWoc® will flash
one time in GREEN.
There is only one exception in this operation: Press and hold
(long press) buttons [A] and [B]. These types of special
operations use the LED of the iWoc as follows:
Page 14
Confirmation of Command
3
1
2
IMPORTANT
If you are using the ebikemotion APP and there is any
error in the eBike system, the APP will show an error in
the screen with a code. While the error persists the
APP will show a warning icon. Press on the icon to get
extra information about the last error.
Please check your eBike manufacturer reference guide
for more information about errors and solutions.
A
iWoc® Standard - Manual
If the process is successful the RGB LED will flash one time in
GREEN colour. If there is any error it will emit a steady RED
light while the error persists.
- Long press button [A] - Walk mode: Power Assist level 1
will be blinking during the push-assistance operation.
- Long press button [B] - Switching eBike Lights: ( LED [2]
long starts in WHITE colour)
During all operation of the eBike, the iWoc® remote is
checking the appropriate operation of all components. LED
lights and APP are used to represent information to the user
about any malfunction in the system.
The iWoc® will indicate any error by flashing the RGB LED in
RED. Please connect your smartphone and open
ebikemotion® APP to get a detailed description of the error.
For service or repairs on the eBike, please refer to an
authorised bicycle dealer.
Once the iWoc® is paired with a smartphone, iWoc® notifies
the user that the process has been successfully completed. It
will do so by switching on the RGB LED in BLUE for a few
seconds. In the APP you will also see one alert in the screen
for a few seconds as well as a rounded antenna icon in the
left bottom corner.
Bluetooth communication is used for 2 important functions:
- Communication with the ebikemotion® end user APP.
This allows you to use your smartphone as a cycling
computer
-Communication with the ebikemotion® Dealer APP.
This can be used for any support and repair in the eBike.
REMEMBER
Remember the ebikemotion APP is one of the most
interesting features of your eBike and iWoc®. Please go
to Google Play or Apple Store to download the latest
version of the ebikemotion® APP, install in your
smartphone, download the maps of your area and
enjoy all functions of your eBike System.
eBike Status and Error Indication
Error Alert
in iWoc
Error Alert
in APP 2
Bluetooth Operation

iWoc® includes a function to inform to the user of incoming
calls. If your smartphone is paired with the APP and you are
receiving an incoming call, the RGB light of the remote will
flash a GREEN light.
- If you answer the call (using your smartphone or
headset) the green light of the remote will switch on for the
duration of the call
- When you hang up the call, the RGB of the iWoc® will
flash in RED for several seconds.
Note: It is not possible to use the remote to answer or hang
up the phone. iWoc® uses BLE for the communication and
the protocol does not support A2DP.
When the eBike switches off, an automatic check control
process is performed in order to report to the APP, for
example, that the eBike is OFF. This will stop the current
recording, and save the current position and last status of
the eBike.
When you switch OFF the eBike system by long pressing
button “C”, you will see that the RGB LED lights in this
sequence turn green, blue, red and finally white before
finally switching off. All LED lights of the remote will switch off
and the eBike system will be switched OFF.
Page 15
Call Reception
Incoming call
call in course
hang up the call
Bluetooth® Operation
2
2
Switching Off eBike, Check Control
C
iWoc® Standard - Manual

E
D
If you have a compatible smartphone (more information in
the ebikemotion® APP User Manual) with the eBike, you will
be able to start the Bluetooth pairing process. Ensure that
you have your Bluetooth started in your smartphone.
1. Install the ebikemotion® APP on your smartphone and
complete the Registration or Login process. (Search in
Google Play or Apple Store ebikemotion® APP
2. Switch on the POWER button [C] of the iWoc®
(Remote Control) to start the eBike.
3. Open your ebikemotion® APP:
a) If the smartphone is automatically paired you
will see the following message on the screen: “pairing with
the eBike complete”
b) If the iWoc® is not paired, the eBike may be
paired with another Smartphone. In this case, switch off the
eBike and restart it by long pressing (press and hold) the
button [C] to delete any previous smartphone paired. RGB
light [2] will start to flash in BLUE
c) When the eBike and Smartphone are paired
you will see an ALERT in the top of the screen with the
message “pairing with the eBike complete”. Your eBike and
your Smartphone are now paired and it will not be
necessary to pair again. The eBike will be paired with your
last paired smartphone and will not be visible for other
Smartphones.
d) Each time you switch-off your eBike, you will
receive a top screen alert in the APP with the message: “bike
pairing – connection with the bike lost”..
When your smartphone is paired with an
eBike you will see two elements on the
monitor that will indicate the pairing is
complete:
- The panel to indicate the Power Assistance level will
show a number or the letter N “neutral”.
- You will see an alert in the screen in the APP for a few
seconds and a rounded antenna icon in the left bottom
corner of the screen
You can choose to place your smartphone on the handlebar
(using any standard holder in the market) or leave your
smartphone in a safe place like your pocket. If you decide to
use your smartphone on your handlebar, remember that
you will be able to control the APP by the iWoc® remote
using the buttons [D] and [E] while you see all the information
of your eBike displayed on the screen of your smartphone.
- Call Reception
- Switching Off eBike, Check Control
Page 16
ebikemotion® APP is one of the most advanced eBike
cycling APPs of the market. It includes off-road navigation,
tracking, routing, eBike information on route, eBike status
and a large etc. You will discover a new and different way of
riding if you are using the ebikemotion® APP. Some of its
premium features like maps are included with your eBike
because your eBike integrates the iWoc® remote.
Using the APP is the best way to keep your eBike updated
because you can receive updates and notifications based
on the information that your eBike reports to the system
about your status. The Ebikemotion® APP is TOTALLY FREE
and will allow you the possibility of using it in a normal or
professional way, depending on your preferences, including
full integration with other systems like Facebook®, Twitter®,
or STRAVA® integration, using just one APP for everything.
ebikemotion® APP IOS Version (eBike Connection)
6.1 Bluetooth® Pairing Process
C
REMEMBER
To force a new Bluetooth® pairing from the APP, go to
the MAIN MENU / SETTINGS / and press in the option
“Pair with new EBM Bike”.
iWoc® Standard - Manual
6. Operation with APP

The pairing process in iPhone and Android are totally
different.
- IPhone: The process is fully transparent. You will not
need to go to any menu to establish the Bluetooth® link. The
ebikemotion® APP will find the closest compatible device
that answers to the iWoc® call for pairing.
- Android: In these smartphones you will have to go the
SETTINGS and select the option for Bluetooth® pairing
process with iWoc®. You will see a list of nearby devices and
you will need to select one of them
It is possible to control the ebikemotion® APP using the
buttons [E] and [D] of the iWoc® remote. The main functions
that you can control of the ebikemotion® APP are:
- Remove the menu
- Change the Monitor view between Speed / Map /
Range Map
- Change the Auxiliary Monitor Components between
(Weather, Music, Bike)
- Modify the ZOOM level of the Maps
- If you are listening to music: Play, Pause and Next Song
- List a Voice Command (Actual information status)
In order to control the ebikemotion® APP you must use the
buttons [E] and [D]. You can user long or short press, and the
command will be different depending of type of information
that you see in the monitor
When the MAIN MENU is deployed, the user may want to
see the full view of the Monitor without the menu
information. To release the menu, simply touch any button of
the iWoc® remote.
You can also use Heart Rate Monitors connected to the
smartphone. The ebikemotion® APP will use this information
to complete the information of your activity, which will be
displayed on the Monitor APP while you are riding.
The ebikemotion® APP is even able to automatically control
the Power Assistance system of your eBike, adapting to your
heartbeats and keeping under a maximum value using the
current beats supplied by your Heart Rate monitor as a
reference
.
You will find a full description of ebikemotion® APP
configuration and pairing process with Heart Rate monitors
in the ebikemotion ® APP User Manual. Please check it.
Keep in mind that if you manually modify the Power assist
level by the iWoc® remote, you will deactivate the function
when the HR Auto-Assist based system has been activated..
REMEMBER
There are many Bluetooth® HR Monitors in the market.
Some manufacturers modify some information in the
Bluetooth® BLE Standard protocol to protect the use of
the HR monitors only with their devices. Ensure that you
are using and HR standard Bluetooth® BLE sensor.
ebikemotion® APP it is only compatible with them.
Page 17
Remove the MAIN MENU
6.2 iPhone and Android pairing process 6.4 Remote control of the APP by iWoc®
6.3 Pairing Process with HR Monitor
E
D
ebikemotion® APP IOS Version (eBike Connection)
iWoc® Standard - Manual

The information that you will be able to see in the AUX
component is
- Weather
Wind Speed, Humid, Current Temperature and
Weather, Weather forecast for the next 1-4 hours.
- Music
Function (Play/Pause), Picture of the song or disk
Name of Disk, Name of song, Remaining time
Progress
Page 18
The ebikemotion® APP divides the information into 2 big
categories:
- Monitor
- Aux Components
In the monitor area it is possible to see:
- Speed Monitor
- Map Monitor (Navigation, tracking, guiding or map
location)
- Range Map Monitor (Same maps as Map Monitor but
with additional Range area and Range information)
To change between these monitors, short press (press once)
the [E] button.
The AUX components can represent information for
Weather, “Music” and Bike. Keep in mind that music
windows only appears if the smartphone is playing music
from its own music player
To change between these monitors short press (press once)
the [E] button.
Change the Monitor between Main Views
Change the Monitor view (Auxiliary Info)
E
D
D
E
D
Music / Música
Musik / Musique
WEATHER
MUSIC
SPEED
BICYCLE
MAP
HEALTH
REACH
iWoc® Standard - Manual

While your Smartphone is running the ebikemotion® APP
you can place your phone in different places, including the
handlebar or in your pocket. There is a command that asks
the ebikemotion® APP to tell you the current most important
information, which can differ according to the current AUX
components that the smartphone is showing.
All the Aux screens in the monitor contain different
information.
- Press and hold button [D] to see the current speed,
level of battery, altitude, HR, etc
ebikemotion APP is fully
integrated with Android
Wear and Apple watch.
So after installing your
APPs, remember that you
can also activate the APP
in your watch
If you are playing music using a native players such Apple
Music, for example, the ebikemotion® APP will automatically
display a new screen with AUX components to see
information about the current song.
While the music is playing, it is possible to control some of
the player functions using the iWoc® remote control if you
are using the Music Aux component in the ebikemotion®
APP Monitor.
- Press and hold button [D] to pause the music if it is
playing and play again if it is in pause mode.
- Press and hold button [E] to move you to the next song
of the current play list
Page 19
Listening to a Voice Command
Commands if you are listening to music
Music Monitor. It appears if music is playing
- Bike
Current Altitude, Current Slope, Current HR if
monitor is connected, Watts remaining in the Battery
Range estimation in Km, Motor Power, Battery
capacity, Average Speed
- Cadence (Pedalling)
Health information, Current HR, Medium and
Maximum HR, Burned, calories
When the ebikemotion® APP is showing any map
(Navigation or Range) it is possible to control the level of
zoom using the iWoc(r) remote. You can do Zoon IN or OUT
operations.
- Press and hold button [E]. The map will start to ZOOM
IN until you release the button.
- Press and hold button [D]. The map will start to ZOOM
OUT until you release the button.
Level of zoom will be automatically restored when you
change the current monitor view in the ebikemotion® APP
Monitor
Modify the ZOOM level of the Maps
Zoom OUT
Zoom IN
D
E
Play/Pause
D
Next Song
E
D
REMEMBER
Turn speaker volume up to listen to the voice advice.
The voice command only operates if the user is not in
the MUSIC screen
6.5 Smartwatch Integration
iWoc® Standard - Manual

Page 20
Code Description
0 NO ERROR
1 THROTTLE-NO-GO-BACK
2 THROTTLE-FAULT
3 TORQUE-FAULT
4 LOW-VOLTAGE-PROTECTION
5 OVER-VOLTAGE-PROTECTION
6 HALL-SENSORS-FAULT
7 OVER-TEMPERATURE-PROTECTION
8 TEMPERATURE-SENSOR-FAULT
9 CURRENT-SENSOR-FAULT
10 BMS-COMMUNICATION-FAULT
Corrective Measure
Not needed
Switch off the eBike System. Ensure that the throttle is released and try
again.
Throttle damaged or out of operation specifications. Contact your eBike
dealer
Torque damaged or out of operation specifications. Contact your eBike
dealer.
Battery Pack voltage too low. Please charge the battery Pack.
The Battery Pack voltage is not correct for this system. Please install the
specific Battery Pack for your eBike System.
Check the motor wire connection. Restart the eBike System. If the problem
persists, contact your eBike dealer.
The eBike is outside of the permissible temperature range. Switch off the
eBike and allow the drive unit to either cool down or heat up to the
permissible temperature. Restart the system. If the problem persists, contact
your eBike dealer.
Temperature sensor damaged. Contact your eBike dealer.
Current sensor damaged. Contact your eBike dealer.
Error in the communication with the Battery Pack. Please check the battery
Pack connector. If the problem persists, contact your eBike dealer.
Alert of error
in iWoc®
Alert of error
in the APP
2
REMEMBER
If there is any error, the iWoc® will show you by flashing the RGB LED in RED colour flashing. Please connect your smartphone and open
ebikemotion® APP to get a detailed description about the error.
00:15:34 125.35 mi
AVS
00:15:34 125.35 mi
16,7
AVS
16:32
1156
RPM
1123
17%
altitude
153
bmp
Bat
86
%
Bat
86
%
MPH
Sport
345 w
149 km
ERROR 4
LOW-VOLTAGE-PROTECTION
Tor
Pwr
iWoc® Standard - Manual
7. Error Codes. Reference