Ixon IX2400 User manual

Seamlessly integrated with the IXON Cloud
IXrouter
Quick Start Guide
Warning
The IXrouter allows the user to remotely connect to industrial control equipment via Ethernet, Wi-Fi, and
cellular network connections. The remote user may fully operate and monitor the local control system and
affect the function and control of the application similar to a local operator. Proper Control, Security and
Safety Procedures should be considered and implemented when utilizing the remote access feature.
Wi-Fi and 4G models
The antenna used with this transmitter must be installed with a separation distance of at least 20 cm from
all persons and must not be co-located or operated in conjunction with any other antennas or transmitters.
Only an antenna tested with the wireless transmitter or a similar antenna with equal or lesser gain may be used.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IX2400
802.11b/g/n
Client + AP mode
Region: Worldwide
LTE: B1/ B2/ B3/ B4/ B5/ B7/ B8/ B12/ B13/ B18
B19/ B20/ B25/ B26/ B28/ B38/ B39/ B40/ B41
WCDMA: B1/ B2/ B4/ B5/ B6/ B8/ B19
GSM: B2/ B3/ B5/ B8
Region: Worldwide
LTE: B1/ B2/ B3/ B4/ B5/ B7/ B8/ B12/ B13/ B18
B19/ B20/ B25/ B26/ B28/ B38/ B39/ B40/ B41
WCDMA: B1/ B2/ B4/ B5/ B6/ B8/ B19
GSM: B2/ B3/ B5/ B8
802.11b/g/n
Client + AP mode
IX2405
IX2410
IX2415
Connectivity specications
Model Wi-Fi Cellular
General Specications
Ports 5x GbE (4x LAN, 1x WAN), 1x USB2.0
12-24 VDC +/- 20% LPS 2A
About 2.5 to 5 Watt (idle)
-20°C to 65°C
111 x 95 x 28mm
Metal case, IP20, DIN rail mountable
Two years
Lifetime access included
Power supply
Power consumption
Temerature range
Dimensions
Physical specs
Certications
Warranty
IXON Cloud
Version 1.4 06042021
Additional Help and Support
For additional product support, specifications, a detailed user manual and installation tips
go to support.ixon.cloud. For direct technical support and questions, get in touch with our
Technical Support team via [email protected] or +31 (0)85 – 744 1105.
All models can connect via a wired connection (Ethernet cable).

Ready. Set. Go!
You’ve now successfully installed your IXrouter. The IXrouter is designed for and seamlessly
integrated with the IXON Cloud. Any further configuration can be handled from your own
IIoT account. The IXON Cloud offers a multitude of services. Deliver remote service,
monitor your machine, set up alerts, and create high-end data reports. It’s all at
your fingertips in your own customer portal.
Find out more about IXON’s solution and its endless possibilities on www.ixon.cloud.
1. Create your account
Get started with the IXrouter by creating an account on the IXON Cloud. Set up your own
IIoT user and company account by visiting portal.ixon.cloud
2. Get cong
Easily create the configuration file for your IXrouter from your own IIoT account. Go to
the IXON Cloud Fleet Manager app. Expand the main menu, and select [Tools], then start
the self-explaining wizard. Save the downloaded file to a USB flash drive (included) using
the exact filename router.conf.
CREATE ACCOUNT
ACT
3. Connect
No matter your situation, you can always connect your machine to the cloud. The IXrouter
provides wired (Ethernet), 4G or Wi-Fi connectivity options. Registration starts immediately
upon inserting the USB flash drive. Once the ACT led status is steady blue, the IXrouter is
connected to the IXON Cloud and will automatically show up in your company account.
Only insert the SIM card when the IXrouter is turned off.
Troubleshooting Front Panel LEDs
Constant Blue Connected, good reception
Constant Purple Connected, medium reception
Constant Red Connected, poor reception
Blinking Blue fast Initializing cellular module
Blinking Blue 1 pulse No reception or unable to connect to
network (APN or SSID may be incorrect)
Blinking Red 1 pulse No reception or unable to connect to
network (APN or SSID may be incorrect)
Blinking Red 2 pulses PIN invalid or PUK required
Blinking Red 4 pulses SIM card is invalid or missing
ACT Constant Blue Succesfully connected to the IXON Cloud
Blinking Blue 1 pulse Connecting to the IXON Cloud
Blinking Blue 2 pulse Initiating VPN connection
Constant Red Booting up (may take 1 min) or not
yet registered
Blinking Red 1 pulse Waiting for internet access
Blinking Red 3 pulses LAN/WAN conflict (conflicting subnets)
Blinking Red 4 pulses Removed from the IXON Cloud (re-insert
USB flash drive to register again)
Blinking Red 5 pulses Previously registered to the IXON Cloud
(remove from the IXON Cloud and register again)
LED State Description