J.Burrows BRIGHTON JBBRIE12WE User manual

SNOITCURTSNIYLBMESSA
BRIGHTON ELECTRIC HEIGHT ADJUSTABLE DESK
JBBRIE12WE
.thgirypocottcejbussitelkoobnoitcurtsnidnangisedsihT
ua.moc.skroweciffo.www
For spare parts or hardware call 1300 OFFICE .)3243360031(
1 / 12
1 Carton

2 / 12
FurnitureAssemblyIns
Estimated Assembly Time:
Assembly Video
To view an assembly video, go to https://www.officeworks.com.au/
Search the product by item code or name:
Click on the icon to watch the video.
setunim51
Customer Service Contact Details
Spare Parts & Hardware
1300 OFFICE )3243360031(
General Advice
People Required

3 / 12
Tools Required
CAUTION: Do not use tools other than those required, as this
can damage your new item.
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
NOTE
Please check you have all hardware before assembling.
Please ensure you have the name of the item, required hardware part and quantity.
Please retain your receipt as proof of purchase to validate your warranty.
CAUTION
Do not tighten screws before all screws are in the right place.
Do not use this product unless all bolts and screws are firmly secured.
Check that all bolts and screws are securely tightened at least every 4 months.
WARNING
If parts are missing, broken, damaged or worn, stop using the product until all repairs
are made using manufacturer authorised parts.
Failure to follow these warnings could result in serious injury.
DANGER
CHILDREN MUST BE SUPERVISED.
If you are missing any hardware, please contact 1300 OFFICE (1300 633 423).

4 / 12
Safety and Warnings
Operation time: Max.2min on/18 min off
Max Speed: 25mm/s
Desktop Size: Length 1200mm, Width 600mm, Thickness 16mm
Lowest Position: 715mm
Max.load: 50kg
Input Voltage: 100-240V
Stroke: 465mm
Highest Position: 1180mm
Usage
•This table complies with the prescribed safety regulations. Inappropriate use may cause damage to persons and
table.
•Please read the operation manual prior to start using the table. It provides you with important information about
safety, use, installation and maintenance of the table, and thus protecting you and your children and avoiding
damage on the table.
•Please guard this operation manual and pass it on to any future owner!
•Do not place any objects above 60.9 cm underneath the table.
•The appliance is only to be used with the unit provided (Power supply).
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concern-
ing use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
The appliance is only to be used with the power supply unit provided with the appliance.
If the supply cord and supply unit is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
The electromotive, height-adjustable tables are designed for workstations in dry work environments only. The table
height is infinitely adjustable, so that it can be set to the most ergonomically suitable working level.
They have not been designed for other purpose than those included in this manual, e.g., they are not to be used in
ares of high humidity or dampness, not for lifting people. Any other use is at one's own risk!
Do not crawl, lie or move around under the table frame, and do not sit or stand on the table frame.
Liability: The manufacturer accepts under no circumstances warranty claims or liability claims for damage sarising
from improper use or handling of the table frame other than that described in this operation manual.

5 / 12
Parts List
x11x22
x23x14
x15x16
x17x48

6 / 12
x14
x17
Hardware Spare Parts Number-HWBRIEHW
Hardware List
Spare Parts Number-HWBRIEPWRC
Spare Parts Number-HWBRIECTRL
Ax4 Bx8 Cx1
M6x12mm M6x16mm 4x4

7 / 12
Install Legs
Step 1
1. As shown in the
picture, insert leg into
the gear box.
2. Rotate the leg (2)
to the position as
shown in the figure,
rotate clockwise by
45° afte full insertion.
3. After rotating, first use
the 4x4 allen key (D) to
screw the screws (A) into
the position shown in the
figure, and then tighten
the 8 screws.
Ax4 Cx1
1
C
A

8 / 12
Install Control Panel
Step 3
Install Feet
Step 2
Bx8 Cx1
Screws for control panel
4
C
B
Note: The screws must be
tightened.

9 / 12
Connect Cables
Step 4
Connect switch cord (6), motor line, control panel (4), adapter (5) and power cable (7) as shown in
the figure, and use cable tie (8) to keep cables organized, then use velcro to fix adapter at proper
position under the tabletop.
Use the cable tie (8) to fix the cable at
proper position and keep cables organized
Tear off Manage CableFix
4

10 / 12
Finished
Step 5
Maximum weight capacity
50

11 / 12
● Button Lift Function
Press the“▲”or“▼" button to adjust the height of the desk.
● Reset Function
(1) When the lifting system fails, release the button, long press the "▼" button, the reset will be finished until the lift
system rebound and stop after reaching the bottom.
● Anti-Collision Safety System
The situation that lifting system meets obstacles will trigger this function and then please follow step (1). Press and
hold buttons “▲”and“▼”for more than 5s to turn on or turn off anti-collision safety system.
If the anti-collision system is too sensitive, please check if the control panel was tightened with the desktop.
The following tips will help you detect and eliminate the common fault and error. If the fault you met is not
listed below, please contact 1300 OFFICE (1300 633 423). Only the manufacturer and professionals are
capable for investigating and correcting those fault and error.
1.Power supply:AC100V-240V,50/60HZ
2.Service Environment:0-40℃
3.Unplug the power plug before cleaning, wipe the dust on
surface with slight wet dishcloth when cleaning, be careful
not to let the drops into the internal parts, not loose the
connector.
4.The electric box contains electronic components,
metals, plastics, wires etc., so dispose of it in accordance
with each country’s environmental legislation, not the
general household waste
5.Check carefully to ensure correct and complete assem-
bly before using.
6.Be familiar with all functions and program settings of the
product before first use.
7.Children are forbidden to play on the product because of
unforeseen action when playing, so any dangerous conse-
quences caused by this improper action will not be on
manufacturers.
8.Slight noise caused by the V-ribbed belt or brake system
due to structure will not have any effect on the use of the
equipment.
9.Corrosive or abrasive materials are forbidden to clean the
equipment. Must ensure that the cleaner used will not pollute
the environment.
10.Please make sure there is no hazard sources in your
operating environment.e.g. do not litter the tools around.
Always be careful to treat the packaging, materials in order
to avoid any possible danger, e.g. plastic bag may lead to
choking hazard to children.
11.Keep the original package of the equipment if necessary
in case of the future use in transportation.
12.If there appears damage of the power cord, please
contact the manufacturer or a professional for replacement.
Adjust the desk upwards
Adjust the desk downwards
Error Code Description Method
E01
E02
E03/E04
E05/E06/E10
E09
Overwork
Overtemperature
Overloaded
The legs cannot move in the process of
rising or going down
The weight distribution on two sides of table
is severely unbalanced.
All the cables be connected well
Please retry 18 mins later
Please retry 18 mins later
Please reset
Please reset
Please reset
Please reset
E07/E08/E20/E21/E22//E23
How to use control panel

12 / 12
Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit
www.officeworks.com.au
Warranty 3 years
Product Warranty – valid for Australian customers only
Officeworks Ltd warrants that this product will be free from defects and work as
intended for 3 years from the date of purchase by the original customer.
If the product has any defects or does not work as intended during the Warranty
Period, Officeworks will, at its election and at its expense, repair or replace the
product.
This warranty does not apply:
-To cosmetic damage;
-To damage caused by consumables used in connection with the product (such
as cleaning products);
-Where the product has not been used in accordance with all provided instruc-
tions;
-To damage arising from fair wear and tear;
-Where the product has not been subject to reasonable use;
-Where the product has been intentionally or negligently damaged; and/or if the
customer has attempted to repair the product.
To make a claim under this warranty, please return your product with your
receipt or proof of purchase to your nearest Officeworks store or contact 1300
633 423.
This warranty is provided in addition to any rights you may be entitled to under
the Competitions & Consumer Act 2010.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.