Furniture of America Castor CM7590Q User manual

For more information contact our team: [email protected]

Prepare 8 bolts assembly by inserting lock washer (#B), then flat washer (#C)
onto bolts (#A). Align headboard (#1) and headboard cross bar (#3) to the holes
of the headboard legs (#2R/L). Secure by using bolts (#A).
Attach footboard bun foot (#6) to the
bottom holes of the footboard (#5).

Attach support legs (#8) to the bottom holes of the
footboard (#5). Adjust the leveler of the support
legs (#8) according to ground level.
Attach treaded bolts (#I) to the foot board
(#5) and headboard (#1). Align side rails
(#4) to the threaded bolts of the foot
board (#5) and headboard (#1). Secure by
inserting half moon (#J), flat washer
(#C), lock washer (#B) and hex nut (#K).

Prepare 2 bolts assembly by inserting lock
washer (#F), then flat washer (#G) onto bolts
(#E). Align and secure foot board (#5) to the
side rails (#4) by using bolts (#E).
Attach support legs (#9) to the holes of the slats (#7). Adjust leveler
of the support legs (#9) according to ground level.

Align slats to the side rails (#4), then
secure by using screws (#H).

For more information contact our team: [email protected]

Prepare 8 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A). Align
headboard (#1) and headboard cross bar (#3) to the holes of the headboard legs (#2R/L). Secure by
using bolts (#A).
Attach footboard bun foot (#6) to the bottom
holes of the footboard (#5).

Attach support legs (#8) to the bottom holes of the
footboard (#5). Adjust the leveler of the support legs
(#8) according to ground level.
Attach treaded bolts (#I) to the foot board
(#5) and headboard (#1). Align side rails
(#4) to the threaded bolts of the foot board
(#5) and headboard (#1). Secure by
inserting half moon (#J), flat washer (#C),
lock washer (#B) and hex nut (#K).

Prepare 2 bolts assembly by inserting lock
washer (#F), then flat washer (#G) onto bolts
(#E). Align and secure foot board (#5) to the
side rails (#4) by using bolts (#E).
Attach support legs (#9) to the holes of the slats (#7). Adjust leveler
of the support legs (#9) according to ground level.

Align slats to the side rails (#4), then
secure by using screws (#H).
Prepare 10 bolts assembly by inserting lock washer (#N), then flat washer (#O) onto bolts (#M).
Align side rail top (#10) to the holes of the side rails (#4), then secure by using bolts (#M).

For more information contact our team: [email protected]