J.Burrows YORKSHIRE JBYORKEXBK User manual

ASSEMBLY INSTRUCTIONS
YORKSHIRE HIGH BACK CHAIR
JBYORKEXBK
1/10
Weight capacity: 150kgs
This design and instruction booklet is subject to copyright.
www.officeworks.com.au
For spare parts or hardware call [phone] or email [email protected]
1CTN

20
2/10
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
• Please check you have all hardware before assembly.
• If you are missing any hardware, please contact Kyvas on [phone] or email
[email protected]
• Please ensure you have the name of the item, required hardware part and quantity.
• Please retain your receipt as proof of purchase to validate your warranty.
.
NOTE
• Do not tighten screws before all screws are in the right place.
• Do not use this product unless all bolts, screws and knobs are firmly secured.
• Check that all bolts, screws and knobs are securely tightened at least every 4 months.
CAUTION
• If parts are missing, broken, damaged or worn stop using the product until all repairs
are made using manufacturer authorised parts.
• Failure to follow these warnings could result in serious injury
WARNING
• CHILDREN MUST BE SUPERVISED.
DANGER
[phone]
Assembly Video
•To view an assembly video,go to https://www.officeworks.com.au
•Search the product by item code or name:
•Click on the icon to watch the video.

C-L / C-R
KL
J
x2x10 x8 x1
-
3/10
x1 x1 x2
x1 x1
x1 x5
x1

Step 1
Step 2
Note: Turn the Star Base (G) upside down. Push the Castors (H) into holes at the end of each leg.
Turn the Star Base (G) upright and insert Gas Lift (E) into the center hole of Star Base (G).
Place cover (F) over the Gas Lift (E).
F
E
G
H
Note: Align the Seat Plate (D) so the FRONT of the Seat Plate matches the FRONT label on the
bottom of the Seat Cushion (B). Tighten the screws.
I
D
B
L
J
L
4/10
FRONT

Step 3
Step 4
Note: Place assembled seat on the Gas Lift (E). Push down firmly until connection is secure.
Note: Attach Armrests (C) to the assembled Seat Cushion (B) using 4x Screws (J) with
Allen Key (L). Do not tighten Screws fully until you have completed assembly.
D
B
H
G
F
E
C-L
B
C-R
J
L
5/10