J.Burrows TYPHOON PRO JBRAPTBK User manual

Weight capacity: 130kgs
1 CTN
<2019-Nov>
This design and instruction booklet is subject to copyright.
www.officeworks.com.au
For spare parts or hardware call [phone] or email [email protected]
ASSEMBLY INSTRUCTIONS
TYPHOON PRO GAMING HIGH BACK CHAIR
JBRAPTBK / JBRAPTBL / JBRAPTRD

[phone]
20min
•Please check you have all hardware before assembly.
•If you are missing any hardware, please contact Kyvas on [phone] or
email [email protected]
•Please ensure you have the name of the item, required hardware part and quantity.
•Please retain your receipt as proof of purchase to validate your warranty.
NOTE
• Do not tighten screws before all screws are in the right place.
• Do not use this product unless all bolts, screws and knobs are firmly secured.
• Check that all bolts, screws and knobs are securely tightened at least every 4 months.
CAUTION
• If parts are missing, broken, damaged or worn stop using the product until all repairs
are made using manufacturer authorised parts.
• Failure to follow these warnings could result in serious injury.
WARNING
• CHILDREN MUST BE SUPERVISED.
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
DANGER
2/9

3/9
H
I J KL
x1 x1
x5x1 x1 x1
x1 x1 x1x1
x1 x2
C
x 1
Q
M6
x 8
N
6x25mm
x 4
M
6x20mm
x 4
O
8x30mm
x 3
P
8x20mm

Note: Turn the Star Base (G) upside down. Push the Castors (H) into holes at the end of each leg.
Turn the Star Base (G) upright and insert Gas Lift (E) into the center hole of Star Base (G).
Place cover (F) over the Gas Lift (E).
Note: Attach Armrests (C) to the Seat Cushion (B) using 8 x Screws (N)
with Allen Key (Q). Tighten the screws with Allen Key (Q).
F
E
G
H
N
8Pcs
ø6x25mm
used to complete
this step.
N
B
Q
C
C
4/9
FRONT

Note: Attach BackBar (J) to the Back (A) using 4x Screw(O) with Allen Key (Q). Tighten the screws.
Note: Align the Seat Plate (D) so the FRONT of the Seat Plate matches the FRONT
label on the bottom of the Seat Cushion (B). Tighten the screws with Allen Key (Q).
B
D
M
Q
O
J
A
Q
O
4 Pcs
ø8X30mm
used to complete
this step.
M
4 Pcs
used to complete
this step.
ø6x20mm
5/9
FRONT

Note:Attach BackBar (J) to the mechanism (D) on the assembled Seat Cushion (B)
using 3x Screw (P) with Allen Key (Q).Tighten the screws.
Note: Place assembled seat on the Gas Lift (E). Push down firmly until connection is secure.
J
P
Q
D
P
3 Pcs
ø8X20mm
used to complete
this step.
6/9
6
FRONT

Note: Fasten the decorative buckle (I) by pushing until connect is secure.
I
Attach lumbar cushion
Attach headrest cushion
K
L
7/9
7
8

Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit www.officeworks.com.au
8/9
• Spot clean mesh/fabric with upholstery shampoo or dry cleaning powder only.
• Do not saturate mesh/fabric. Apply proprietary cleaning products strictly according
to instructions. Wipe dry immediately with an absorbent dry cloth.
• Treat spills on PU material immediately with an absorbent cloth by blotting the spill.
• Do not use detergents, solvents or abrasive cleaners.
Care Instructions
• Keep away and protect from direct sunlight and heat.
• Avoid contact with skin, in particular during high temperatures and humidity.
• Clean, check and tighten all parts regularly.
• Vacuum regularly.
Your Typhoon Pro High Back Gaming Chair is now complete and ready for use.
IMPORTANT NOTE: Periodically check and re-tighten screws.
9

Typhoon Pro High Back Gaming Chair
Functionality
Chair Tilt
- Push the button while moving the
arm up or down.
- Release button at desired height.
- Sitting in the chair pull lever up. Move your body
to a comfortable position. Lock the position by
pushing the lever down.
- To increase chair height pull
lever upward while lifting body
weight slightly off the seat.
- Release lever at desired height.
- To lower chair height sit fully into
the chair and pull lever upward.
- Release lever at desired height.
Your feet should be resting flat on
the floor.
Adjustable Tilt Tension Control
- Turn continuously to adjust how
quickly chair tilts back & forth.
Note: if adjusting while sitting in chair:
Turn knob left to tighten tension
Turn knob right to loosen tension
9/9