J.Burrows JBPROULTBK User manual

PROFESSIONAL ULTIMATE ERGONOMIC
HIGH BACK GAMING CHAIR
Weight capacity: 150kgs
1/11
ASSEMBLY INSTRUCTIONS
This design and instruction booklet is subject to copyright.
www.officeworks.com.au
For spare parts or hardware call [phone] or email [email protected]
1CTN
JBPROULTBK

30
2/11
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
• Please check you have all hardware before assembly.
• If you are missing any hardware, please contact Kyvas on [phone] or email
[email protected]
• Please ensure you have the name of the item, required hardware part and quantity.
• Please retain your receipt as proof of purchase to validate your warranty.
.
NOTE
• Do not tighten screws before all screws are in the right place.
• Do not use this product unless all bolts, screws and knobs are firmly secured.
• Check that all bolts, screws and knobs are securely tightened at least every 4 months.
CAUTION
• If parts are missing, broken, damaged or worn stop using the product until all repairs
are made using manufacturer authorised parts.
• Failure to follow these warnings could result in serious injury
WARNING
• CHILDREN MUST BE SUPERVISED.
DANGER
[phone]
Assembly Video
•To view an assembly video,go to https://www.officeworks.com.au
•Search the product by item code or name:
•Click on the icon to watch the video.

3/11
A
x5 x1 x1 x1
x1 x1 x1 x1
x1
x1
x1
B C D
E F G H
I J K
L(M8x25mm) (M5 x 8mm)
(M6) (M5)
M
x 8 x 8x 8 x 2
N O
P Q
x 1 x 1x 2
R
FRONT

4/11
D
C
B
B
A
A
Note: Push the Castors (A) firmly into hole at the end of each leg.

5/11
M
2 Pcs
M5x8mm Bolt
used to complete
this step.
RM
I
R
M
H
L
4 Pcs
M8x25mm Bolt
used to complete
this step.
QQ
LL
F
Warning : DO NOT adjust/ touch the backrest lever before
the backrest has been securely fastened to bracket. Doing
so will cause the bracket to spring forward and may
cause harm. Keep hands clear of the recline mechanism
until the backrest has been assembled.
Bracket
Bracket Recline Lever
O
N
ON
G

6/11
6
P
Note: Do not tighten screws fully until all screws are in place.
L
4 Pcs
M8x25mm Bolt
used to complete
this step.
LQ
ON
FRONT
FRONT
E
G
P

Note: Headrest cushion - Fasten the clips by pushing together, place at the top of the backrest.
Note: Place assembled Seat Cushion (G) on the Gas Lift (C). Push down firmly until connection
is secure.
7/11
7
8
G
C
K
J
Lumbar cushion – Place the bottom straps through the gap between the seat and back rest. Feed
the top straps through the holes at the top of the backrest. Fasten the clips by pushing together.

Your Professional Ultimate Ergonomic High Back Gaming Chair
is now complete and ready for use.
IMPORTANT NOTE: Periodically check and re-tighten screws
8/11
9
Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit www.officeworks.com.au
• Wipe with a damp cloth and mild soap. Wipe dry
immediately with an absorbent dry cloth.
•Treat spills immediately with an absorbent cloth by
blotting the spill.
• Do not use detergents, solvents or abrasive cleaners.
• Keep away and protect from direct sunlight and heat.
•Avoid contact with skin, in particular during high
temperatures and humidity.
• Clean, check and tighten all parts regularly.
• Vacuum regularly.
Care Instructions

9/11
PROFESSIONAL ULTIMATE ERGONOMIC
HIGH BACK GAMING CHAIR
- Pull lever up whilst moving the
arm up or down. Release lever
at desired height.
Arm Height Adjust
- Press the button while moving
the armrest side to side.
Side to Side
SIDE TO SIDE
- Press the button while moving
the armrest forward or backward.
Forward or Backward
Forward
or
Backward
- Adjust the armrest angle by
turning the armrest inwards
or outwards.
Arm Swivel
ARM
SWIVEL
Functionality

PROFESSIONAL ULTIMATE ERGONOMIC
HIGH BACK GAMING CHAIR
Functionality
10/11
- To increase chair height pull
lever upward while lifting body
weight slightly off the seat.
- Release lever at desired height.
- To lower chair height sit fully into
the chair and pull lever upward.
- Release lever at desired height.
Your feet should be resting flat on
the floor.
Chair Height Adjustment
Adjustable Tilt Tension Control
-Turn continuously to adjust how
quickly chair tilts back & forth.
Note: if adjusting while sitting in chair:
Turn knob left to tighten tension
Turn knob right to loosen tension
- Sitting in the chair pull the lever up.
Move your upper body forward and
backward to a comfortable position.
When comfortable lock the position
by pushing the lever down.
Back Tilt
- Pull lever out to unlock & allow chair
to tilt back & forth
- Push lever to lock.Chair will have slight
movement in locked position
Chair Tilt

11/11
Warranty 8 years
Product Warranty – valid for Australian customers only
Officeworks Ltd warrants that this product will be free from defects and work as
intended for 8years from the date of purchase by the original customer.
If the product has any defects or does not work as intended during the Warranty Period,
Officeworks will, at its election and at its expense, repair or replace the product.
This warranty does not apply:
to cosmetic damage;
to damage caused by consumables used in connection with the product (such as
cleaning products);
where the product has not been used in accordance with all provided instructions;
to damage arising from fair wear and tear;
where the product has not been subject to reasonable use;
where the product has been intentionally or negligently damaged; and/or
if the customer has attempted to repair the product.
To make a claim under this warranty, please return your product with your receipt or
proof of purchase to your nearest Officeworks store or contact 1300 633 423.
This warranty is provided in addition to any rights you may be entitled to under the
Competitions &Consumer Act 2010.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit www.officeworks.com.au
●
●
●
●
●
●
●