J.Burrows KENNEDY JBKENEDYBK User manual

KENNEDY DELUXE CHAIR BLACK
ASSEMBLY
INSTRUCTIONS
JBKENEDYBK
1/8
Weight capacity:180kg
1 CTN
www.officeworks.com.au
For spare parts or hardware call 1300 OFFICE
This design and instruction booklet is subject to copyright.

2/8
Estimated Assembly Time: 30 minutes
Furniture Assembly Instructions S
Assembly Video
Customer Service Contact Details
Spare Parts & Hardware
1300 OFFICE
People Required
General Advice
To view an assembly video, go to https://www.officeworks.com.au/
Search the product by item code or name:
Click on the icon to watch the video.

3/8
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
NOTE
•Please check you have all hardware before assembling.
•If you are missing any hardware, please contact the store of purchase.
•Please ensure you have the name of the item, required hardware part and quantity.
•Please retain your receipt as proof of purchase to validate your warranty.
CAUTION
•Do not tighten screws before all screws are in the right place.
•Do not use this product unless all bolts and screws are firmly secured.
•Check that all bolts and screws are securely tightened at least every 4 months.
WARNING
•If parts are missing, broken, damaged or worn stop using the product until all repairs
are made using manufacturer authorised parts.
•Failure to follow these warnings could result in serious injury.
DANGER
•CHILDREN MUST BE SUPERVISED.

Parts List
Hardware List
4/8
Ax5
Dx1 Ex1
Gx1(L&R)
Hx4 Ix4 Jx4
Kx2
Fx1
Bx1 Cx1
M8x28mm M8x38mm M8x50mm
M5
M6
Lx4

Step 1
Step 2
5/8
A
B
C
D
E
H
Hx4
M5
Kx1
Assembly

Step 3
Step 4
6/8
Ix4
M5
Kx1
I
F
E
C

Step 5
Step 6
7/8
Jx4
M6
Kx1
G
J
J
Lx4

8/8
Care Instructions - PU Chairs
Wipe with a damp cloth & mild soap. Wipe dry immediately with an absorbent drycloth.
Treat spills immediately with an absorbent cloth by blotting the spill.
Do not use detergents, solvents or abrasive cleaners.
Avoid contact with skin, in particular during high temperatures & humidity.
Clean, check & tighten all parts regularly.
Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit www.officeworks.com.au
Chair Height Adjustment
To increase chair height
pull lever upward while
lifting body weight slightly
off the seat.
Release lever at desired
height.
To lower chair height sit
fully into the chair and pull
lever upward.
Release lever at desired
height
Chair Tilt
While seated, reach under the
right side of the chair to find the
height adjustment handle.
Pull the handle all the way out
(away from the gas lift) to allow
the chair to tilt backwards, to lock
the chair in the upright or vertical
position, sit upright and push the
handle in towards the gas lift.
Turn continuously to adjust how
quickly chair tilts back & forth.
Note: if adjusting chair while
sitting in the chair
Turn knob left to tighten tension.
Turn knob right to loosen tension.
Adjustable Tilt Tension Control