J.Burrows Sit Stand Stool User manual

Assembly Instructions
Sit Stand Stool
Page 1
This Stool has a load rating of 120kg

Important
Estimated Assembly Time: 15min
PART LIST
1X1X1X1X
Page 2
Please check you have all components before assembling.
If you are missing any components please contact My Zone on Tel: [phone] or Email: [email protected]
Please ensure you have the name of the item, store purchased from, part required and quantity.
Please retain your receipt to validate warranty. Enjoy your new purchase!
A B C D
Base Seat Cushion Gas Lift Gas Lift Cover

Page 3
Step 1
Step 2
Note: Turn the Seat Cushion (B) upside down. Press the Gas Lift Cover (D) into holes at the bottom
of Seat Cushion. Turn right to fix the Gas Lift Cover (D) with Seat Cushion (B).
Note: Insert Gas Lift (C) into the center hole of Base (A).
D
B
C
A

Note: Position the Seat Cushion (B) over Gas Lift (C) and push down firmly until the connection
is secure.
Page 4
Step 3
Step 4
Your Sit Stand Stool is now complete and ready for use.
Officeworks Superstores Pty Ltd 236-262 East Boundary Road East Bentleigh 3165 Australia
B
C

SIT STAND STOOL
FEATURES
* Stool Height Adjustment
While seated, lift your body
weight from the seat. Reach
under seat and push button
to allow the stool to rise to
the desired height. Release
button at desired height.
To lower seat height, push
button while seated and
release at desired height.
*
*
360˚ SWIVEL
360˚ Seat swivel.
WOBBLE
Use stool only on level surface. Always make
sure both feet on the ground while tipping the
stool when seated. Make sure that the angle
of the tipping should not exceed 15 degrees.