J.Burrows JBBEDMBMBK User manual

ASSEMBLY INSTRUCTIONS
BEDFORD MED MESH BACK CHAIR
JBBEDMBMBK
www.officeworks.com.au
For spare parts or hardware call 1300 OFFICE
1CTN
1/9
Weight capacity:130kg
This design & instruction booklet is subject to copyright.

2/9
People Required
General Advice
Estimated Assembly Time:20minutes
Assembly Video
To view an assembly video, go to https://www.officeworks.com.au/
Search the product by item code or name:
Click on the icon to watch the video.
Customer Service Contact Details
Spare Parts & Hardware
1300 OFFICE

3/9
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
Please check you have all hardware before assembling.
If you are missing any hardware, please contact the store of purchase.
Please ensure you have the name of the item, required hardware part & quantity.
Please retain your receipt as proof of purchase to validate your warranty.
Do not tighten screws before all screws are in the right place.
Do not use this product unless all bolts, screws & knobs are firmly secured.
Check that all bolts, screws & knobs are securely tightened at least every 4 months.
If parts are missing, broken, damaged or worn stop using the product until all repairs are
made using manufacturer authorised parts.
Failure to follow these warnings could result in serious injury.
CHILDREN MUST BE SUPERVISED.
CAUTION
WARNING
DANGER

H
L R
6
Hardware List
Parts List
4/9

Hx6(6x25mm)
Ix1（M6)
(R)
Step 1
Step 2
5/9

A
1
50%
Step 3
Step 4
6/9
Do not tighten the knob fully
until you have completed
installing the backrest.

Step 5
Step 6
2
100%
Once backrest has been
completely installed, you can
tighten knob fully.
7/9

8/9
-Pull lever up whilst moving the arm up or
down. Release lever at desired height.
Arms Height Adjustment
-To increase chair height pull lever upward
while lifting body weight slightly off the seat.
-Release lever at desired height
-To lower chair height sit fully into the chair
and pull lever upward.
-Release lever at desired height.
Chair Height Adjustment
-Sitting in the chair pull lever up. Move your
upper body to a comfortable position. Lock the
position by pushing the lever down.
Back Tilt
Seat Tilt
-Sitting in the chair pull lever up. Lean back your
body to a comfortable position. Lock the
position by pushing the lever down.

9/9
Care Instructions-Fabric Chairs
Dust & vacuum chair fabric to remove dust & dirt .
Wipe over surfaces with damp cloth rinsed in warm water & mild detergent.
If any stains persist, use a water-based cleaner. Ensure a spot test is completed
first to ensure it does not affect the fabric colour.
Do not use harsh detergents, solvents or abrasive cleaners.
Clean, check & tighten all parts regularly.