LINSY HOME LH618E1 User manual

ASSEMBLY INSTRUCTIONS - please keep for future reference.
IMPORTANT - please read these instructions before assembly.
LH618E1

General care and maintenance.
Important – Please read these instructions fully before starting assembly.
Please clean with a damp cloth or mild detergent, do not use bleach or abrasive cleaners.
Do not allow the spill to stay on the surface for a long time.
Do not clean with products containing the following: acetone (e.g., nail varnish remover), ammonia
(e.g.bleach), or sodium hydroxide(e.g., caustic soda, drain, and oven cleaners).
If the product is accidentally exposed to the irritating liquid, rinse thoroughly with clean water.
Mats can be used to protect surfaces from moisture and heat.
Please check whether there are missing screws in the product regularly.
The product should not be discarded with household waste, and please take it to your local authority
waste disposal center.
Please check if all the components and tools listed
on pages 3 - 4 are received.
Please remove all fittings from the plastic bags and
separate them into homologous groups.
Please keep children and animals away from the
working areas; swallow small parts may cause
suffocation.
Please make sure you have enough space to lay
out the parts before starting.
Do not stand on the product, which could cause
damage.
Please assemble the product as close toits
final position as possible.
Do not place furniture directly in front of
radiators, fires, or any other source of heat.
The assembly will be easier with 2 people.
Please dispose of all packaging carefully and
responsibly.
Safety And Care Advice
2

Components
Please check if all the pieces listed below are received.
3
1
5
6
4
5
2
7
89
10
11
12
13
14
x4
3
15

Components
Please check if all the pieces listed below are received.
4
A x16 B x16 C x20
K x16
E x40 F x4 G x16 H x8
I x8 J x1
ø15*11.5mm
Ø4x28mm
ø12*10mm
M4x8mm
L=35mm ø8*30mm
L=300mm
D x16
L=28mm
123
4567
810
911
12 13 14
L x4
Mx4
x1
x1 x2 x1 x1
x1 x1 x4
x4 x4 x4 x1
x4
x1 x1
40*40*14mm
16
Nx1

Please check if all the pieces listed below are received.
5
Step 1
F x4pcs E x24pcs
Assembly Instructions
Please use the screws correctly, otherwise the product will be seriously damaged!

Step 2
Assembly Instructions
6
A x10pcs C x8pcs
C
2
3
C
A
A

Assembly Instructions
Step 3
7
A x2pcs C x6pcs B x2pcs

Assembly Instructions
Step 4
8
C x6pcs
4
7
6
C
C
C

Assembly Instructions
Step 5
9
B x5pcs

Assembly Instructions
Step 6
10
B x5pcs

Assembly Instructions
Step 7
11
B x4pcs
A x4pcs
A
1
1
B

Assembly Instructions
Step 8
12
E x16pcs
F x4pcs
D x16pcs

Assembly Instructions
Step 9
13
K x16pcs

Assembly Instructions
Step 10
14
H x8pcs
G x16pcs M x4pcs
G
13
M
H

Assembly Instructions
Step 11
15

Assembly Instructions
Step 12
16
I x8pcs
I
I
I
Note:There are no pinholes on the back panel.please install the back panel buckle
with self-tapping screws in the position shown.

Assembly Instructions
Step 13
17
15

Assembly Instructions
Step 14
18
J x1pcs
L x4pcs
You can decide whether to install
the accessory "L" according to your needs.