J.Burrows TORO JBTORO3PED User manual

ASSEMBLY INSTRUCTIONS
JBTORO3PED
TORO 3 DRAWER PEDESTAL
1/10
1CTN
This design and instruction booklet is subject to copyright.
www.officeworks.com.au
For spare parts or hardware call 1300 OFFICE(1300 633 423)

2/10
Estimated Assembly Time: 15 minutes
Customer Service Contact Details
Spare Parts & Hardware
People Required
General Advice
1300 OFFICE (1300 633 423)

3/10
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
Tools Required
CAUTION: Do not use tools other than those required, as this
can damage your new item.
NOTE
•Please check you have all hardware before assembling.
•
•Please contact Mister Fixit for spare or missing keys at [email protected] or call
1800 234 800
Please ensure you have the name of the item, required hardware part and quantity.
Please retain your receipt as proof of purchase to validate your warranty.
•
•
CAUTION
•Do not tighten screws before all screws are in the right place.
•Do not use this product unless all bolts and screws are firmly secured.
•Check that all bolts and screws are securely tightened at least every 4 months.
WARNING
•If parts are missing, broken, damaged or worn, stop using the product until all repairs
are made using manufacturer authorised parts.
•Failure to follow these warnings could result in serious injury.
DANGER
•CHILDREN MUST BE SUPERVISED.
If you are missing any hardware, please contact 1300 OFFICE(1300 633 423)

4/10
ACD
E
B
x4pcs x16pcs #4*14mm
F
x1pc
G
x1pc
M6*15mm
Parts List
x1pc
x1pc
x1pc x2pcs #4*16mm
I
x1pc
Hardware List
Key

CDE
x16pcs #4*14mm
F
x1pc
G
x1pc
M6*15mm
x1pc
x2pcs #4*16mm
Hardware Spare Parts number - HWASH3PED
5/10
A B
x1pc x4pcs
Hardware Spare Parts number - HWCASTORS

6/10

7/10
Step 3
#B
Detail #B
Detail #B
To remove drawer, pull drawer out until
stopped, then simultaneously push the left
plastic release lever up while pushing the
right lever down, then pull the drawer out, as
shown.

8/10
Step 4
To insert drawer, fully extend both ball bearing
tracks on each side and align the slide runners
on the drawer with the tracks on the unit. Push
the drawer into place until closed. If the drawer
does not smoothly push into place, please
remove and repeat insertion procedure.

10
9/10

10/10
Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products,
please visit www.officeworks.com.au
Furniture Assembly Instructions Style Guide
Product Warranty –valid for Australian customers only
Officeworks Ltd warrants that this product will be free from defects and work as
intended for 8years from the date of purchase by the original customer.
If the product has any defects or does not work as intended during the Warranty Period,
Officeworks will, at its election and at its expense, repair or replace the product.
This warranty does not apply:
To cosmetic damage;
To damage caused by consumables used in connection with the product (such as
cleaning products);
Where the product has not been used in accordance with all provided instructions;
To damage arising from fair wear and tear;
Where the product has not been subject to reasonable use;
Where the product has been intentionally or negligently damaged; and/or
if the customer has attempted to repair the product.
To make a claim under this warranty, please return your product with your receipt or
proof of purchase to your nearest Officeworks store or contact 1300 633 423.
This warranty is provided in addition to any rights you may be entitled to under the
Competitions & Consumer Act 2010.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
Warranty years
8