J.Burrows JBBATHCHRD User manual

ASSEMBLY INSTRUCTIONS
BATHURST HIGH BACK RACER CHAIR
JBBATHCHRD/JBBATHCHBE
JBBATHCHWH/JBBATHCHBK
Weight capacity: 120kgs
This design and instruction booklet is subject to copyright.
www.officeworks.com.au
For spare parts or hardware call [phone] or email [email protected]
1CTN
1/10

20
Officeworks Ltd. | 236-262 East Boundary Road | Bentleigh East VIC 3165 | AUSTRALIA
• Please check you have all hardware before assembly.
• If you are missing any hardware, please contact Kyvas on [phone] or email
[email protected]
• Please ensure you have the name of the item, required hardware part and quantity.
• Please retain your receipt as proof of purchase to validate your warranty.
.
NOTE
• Do not tighten screws before all screws are in the right place.
• Do not use this product unless all bolts, screws and knobs are firmly secured.
• Check that all bolts, screws and knobs are securely tightened at least every 4 months.
CAUTION
• If parts are missing, broken, damaged or worn stop using the product until all repairs
are made using manufacturer authorised parts.
• Failure to follow these warnings could result in serious injury
WARNING
• CHILDREN MUST BE SUPERVISED.
DANGER
[phone]
Assembly Video
•To view an assembly video,go to https://www.officeworks.com.au
•Search the product by item code or name:
•Click on the icon to watch the video.
2/10

x1 x1 x2 x1
x1
x2 x8 x2 x8 x1
x1 x1 x5
3/10

Step 1
Step 2
Note: Turn the Star Base (G) upside down. Push the Castors (H) firmly into hole at the end
of each leg. Turn the Star Base (G) upright and insert Gas Lift (E) into the center hole
of Star Base (G). Place cover (F) over the Gas Lift (E).
F
E
G
H
M
I
D
B
M
K
Note: Align the Seat Plate (D) so the FRONT of the Seat Plate matches the FRONT label on
the bottom of the Seat Cushion (B). Tighten the screws.
K
I
FRONT
4/10

Step 3
Step 4
D
B
H
G
F
E
C-L
B
C-R
J
M
Note: Place assembled seat on the Gas Lift (E). Push down firmly until connection is secure.
Note: Attach Armrests (C) to the assembled Seat Cushion (B) using 4x Screws (J) with
Allen Key (M). Do not tighten Screws fully until you have completed assembly.
5/10

Step 5
Step 6
A
B
C-L
C-R
J
M
Note: Attach Back Cushion (A) to Armrests (C) by securing 2x Screws (J) to the lower holes of
the Back Cushion (A) as shown. Do not tighten Screws fully until Step 7.
Note: Push the Back Cushion (A) to the upright position. Assemble 2x Screws (J) into the
top holes of Back Cushion (A).
J
M
A
B
C-L
C-R
6/10

Step 7
Step 8
B
A
C-L
C-R
L
Note: Fully tighten all Screws (J) with Allen Key (M). Press the Plastic Caps (L) into the
Armrest holes to cover the screws.
IMPORTANT NOTE: Periodically check and re-tighten screws.
Your Bathurst High Back Racer Chair is now complete and ready for use.
7/10

Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit www.officeworks.com.au
• Wipe with a damp cloth and mild soap. Wipe dry immediately with an absorbent dry cloth.
• Treat spills immediately with an absorbent cloth by blotting the spill.
• Do not use detergents, solvents or abrasive cleaners.
Care Instructions
• Keep away and protect from direct sunlight and heat.
• Avoid contact with skin, in particular during high temperatures and humidity.
• Clean, check and tighten all parts regularly.
• Vacuum regularly.
8/10

*
- Turn con nuously to adjust how
quickly chair lts back & forth.
Note: If adjus ng while si ng in chair:
Turn knob l to ghten tension.
Turn knob right to loosen tension.
BATHURST HIGH BACK RACER CHAIR
Functionality
*
Flip Back Armrest
FLIP BACK
ARMREST
Chair Height Adjustment
Chair Tilt
Adjustable Tilt Tension Control
*
- To increase chair height pull lever
upward while li ing body weight
slightly offthe seat.
- Release lever at desired height.
- To lower chair height sit fully into
the chair and pull lever upward.
- Release lever at desired height.
*
- Pull lever out to unlock & allow chair
to lt back & forth.
- Push lever to lock. Chair will have
slight movement in locked posi on.
9/10

10/10
Warranty 3 years
Product Warranty – valid for Australian customers only
Officeworks Ltd warrants that this product will be free from defects and work as
intended for 3 years from the date of purchase by the original customer.
If the product has any defects or does not work as intended during the Warranty Period,
Officeworks will, at its election and at its expense, repair or replace the product.
This warranty does not apply:
to cosmetic damage;
to damage caused by consumables used in connection with the product (such as
cleaning products);
where the product has not been used in accordance with all provided instructions;
to damage arising from fair wear and tear;
where the product has not been subject to reasonable use;
where the product has been intentionally or negligently damaged; and/or
if the customer has attempted to repair the product.
To make a claim under this warranty, please return your product with your receipt or
proof of purchase to your nearest Officeworks store or contact 1300 633 423.
This warranty is provided in addition to any rights you may be entitled to under the
Competitions & Consumer Act 2010.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
Thank you for your purchase. Please retain your receipt to validate warranty.
If you would like to know more about our furniture products, please visit www.officeworks.com.au
●
●
●
●
●
●
●