Askia Kameleon K2 User manual

Kameleon K2/K2+ - Solid Back
ACOUSTIC PODS
ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS
Info.
Power drill needed.
Allen key needed.
Allen key and screws needed.
T-Handle hex key needed.
T-Handle hex key and screws needed.
Unlocked.
Lock.
Level check.
Steps.
Bag with screws.
Screwdriver needed.
Main Ethernet supply.
Main Power supply.
Ventilation coupling.
Power coupling.
Ethernet coupling.
Lighting coupling.
Motion sensor coupling.
Magnetic coupling element.
Whiteboard.
Pinboard.
VESA Adapter.
Pay attention to.
Pay attention not
to break the glass.
Ok.
Stop.
Do.
Don’t.
Pay attention to.
Move in place.
Position the door on pins.

Included
Assembly in 65 min. with 3 people
x1 T-Handle Hex Key 4 x1 T-Handle Hex Key 5 x1 T-Handle Hex Key 7 x2 Sucction cupsx1 Ceiling Panels Adjusterx1 Allen Key 2 x1 Allen Key 3
x6
x16 x2 x8
I

Elements
x2 Exterior Back
Panels
x1 Exterior Middle
Panel
x2 Back
Panels
x2 Middle
Back Panels
x2 Back Structure Panels x1 Middle Structure Panel
x2 Interior Panels x1 Left & x1 Right Structure Panels x2 Exterior Panels x1 Door Frame x1 Left & x1 Right Front Glass
Walls

x1 Ceiling
x3 Acoustic Felt Ceiling Panels
x3 Carpet, x2 Dividers
x1 Floor
Elements
x2 Media adjuster
x1 Door Handle

T-Handle Hex Key 4
1

x16 with
T-Handle Hex Key 4
2

3
Inside
Recommendation
It is recommended to start with
the Middle Structural Panel.
T-Handle Hex Key 7
Sucction cup handles

4
T-Handle Hex Key 7
Sucction cup handles
Inside
Outside

5
x8 with
T-Handle Hex Key 4
Up
I

Recommendation
It is recommended to start with
the Door Frame.
Sucction cup handles
6
The door opening can
be oriented Left or Right
just by rotating the frame.

x6 with
T-Handle Hex Key 4
x2 with
Allen Key 3
7
InteriorExterior
InteriorExterior

Allen Key 3
Allen Key 2
8
Adjust the glass door if
necessary.
Check if the glass door
hits the frame edge before
closing it.
Pay attention not to
break the glass door.
Pay attention not to
break the glass door.
Bottom
Top
Check if the door closes
properly and adjust the
door plates if needed.
Tighten or loosen the
plates when needed.
To adjust the glass door the height must be
calibrated. If you need to raise the glass door,
you loosen the top hinge and tighten the
bottom hinge.
If you need to lower the
glass door, you loosen
the bottom hinge and
tighten the top hinge.

T-Handle Hex Key 7
Sucction cup handles
9
Inside
Outside

10
Main Power & Ethernet supply at the
back of the pod.
Check if the lighting, ventilation and
power sockets are connected properly.
Orange Black

How to remove
the Interior Panel.
11

12
How to remove
the Interior Panel.

13
Front
Back
How to remove
or adjust the
Acoustic Felt
Ceiling Panels.
How to place
the Acoustic Felt
Ceiling Panels.
Ceiling Panels Adjuster

14

15
If you want to reposition the
pod, you have to remove the
carpet, if needed, and unlock the legs. When you are satisfied
with the pod’s position, lock the legs and place the carpets.
If you are satisfied with the pod’s
position, you can place the carpets.