Jabra HSC070W User manual

User manual
Elite 65e
Jabra

© 2018 GN Audio A/S. All rights reserved. Jabra®is a
trademark of GN Audio A/S. The Bluetooth®word mark and
logos are registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by GN Audio A/S is under
license.
Declaration of Conformity can be found on
www.jabra.com/doc
Made in China
MODEL: HSC070W

3
ENGLISH
1. Welcome.........................................5
2. Jabra Elite 65e overview.............6
2.1 Included accessories
3. How to wear...................................7
3.1 Getting the correct fit
3.2 Attaching the EarWings and EarGels
3.3 Using the magnetic earbuds
4. How to charge............................ 11
4.1 What the LEDs mean
5. How to connect.......................... 13
5.1 Power on/o
5.2 Pairing with a smartphone
6. How to use ................................. 15
6.1 Calls & music
6.2 Active Noise Cancellation (ANC)
6.3 HearThrough
6.4 Voice guidance
6.5 Siri or Google Now
6.6 Multiple call handling
6.7 Vibrate alert
6.8 How to reset
7. Jabra Sound+ app...................... 24

4
ENGLISH
8. Support ........................................ 25
8.1 FAQ
8.2 How to care for your earbuds

5
ENGLISH
1. Welcome
Thank you for using the Jabra Elite 65e. We
hope you will enjoy it!
Jabra Elite 65e features
• Active Noise Cancellation (ANC) to reduce
disturbances
• Power battery to fuel all-day use (up to 13
hours on a 2 hour charge)
• Dual-connectivity to two Bluetooth devices,
enabling you to take calls and listen to music
on two devices using the same earbuds
• Up to 10 meters / 33 feet of wireless range
for true mobility
• Vibrating call alert to ensure you never miss
a call
• HearThrough feature: Hear the
conversations around you at the touch of a
button

6
ENGLISH
2. Jabra Elite 65e
overview
jabra
jabra
Vibrating neckband
Microphone
Audio mode LED
Cycle between
ANC and Hear-
Through modes
Magnetic zone
Mute
Voice assistant
Power on/o (hold)
Answer/end call
Play/pause music
Battery/
Bluetooth LED
Volume down
Previous track (hold)
Volume up
Next track (hold)
2.1 Included accessories
EarGels
R
L
R
L
R
L
EarWings
USB charging cable

7
ENGLISH
3. How to wear
Jabra Elite 65e is designed to be worn around
the neck.
The earbuds have three microphones: one on
each of the earbuds and one on the cable. For
the optimal call experience, position the
microphone on the cable as close to your
mouth as possible, and wear both earbuds in
your ears.

8
ENGLISH
3.1 Getting the correct fit
The earbuds are supplied with three EarGel
and EarWing sizes: large, medium and small.
R
L
R
L
R
L
Small Small
Medium Medium
Large Large
It is highly recommended to mix and match the
different EarGel and EarWing sizes to find the
best combination for your ear. The correct fit
will feel tight and will seal out background
noises.

9
ENGLISH
3.2 Attaching the EarWings and
EarGels
1. To attach an EarWing, align the indent on the
EarWing with the ridge on the earbud (as
illustrated), and stretch the EarWing over the
earbud. It will fit perfectly in the groove
when properly attached.
2. Firmly press the EarGel onto the earbud,
ensuring it is angled correctly (as illustrated).
1
2

10
ENGLISH
3.3 Using the magnetic earbuds
The earbuds are magnetic, and connect
together for convenient cable and power
management. When the earbuds are
connected, your music will be paused or your
call will be ended. Separating the earbuds will
answer an incoming call. Go to section 6.1. for
more information.

11
ENGLISH
4. How to charge
To charge the earbuds, connect a USB charging
cable to the USB charging port on the
neckband. It is recommended to charge the
earbuds using the supplied Jabra charging
cable, however it is possible to charge the
earbuds using your smartphone charger.
It takes approx. 2 hours to fully charge the
earbuds.
Note: Always clean and dry the USB charging port before
charging the earbuds. It is recommended to recharge the
earbuds at least once a month.

12
ENGLISH
4.1 What the LEDs mean
Status LED ANC/
HearThrough
LED
Full
Medium
Low
Very low
Pairing mode
Resetting
ANC on
HearThrough
on

13
ENGLISH
5. How to connect
5.1 Power on/o
On: Hold the Multi-function button for 1
second. The LED will flash green, and the
neckband will vibrate.
Off: Hold the Multi-function button for 3
seconds. The LED will flash red, and the
neckband will vibrate.
On O

14
ENGLISH
5.2 Pairing with a smartphone
1. Ensure the earbuds are powered off, and
then hold (3 secs) the Multi-function button
until the LED flashes blue and you hear an
announcement in the earbuds.
2. Wear the earbuds and follow the voice-guided
pairing instructions.
3 sec.

15
ENGLISH
6. How to use
jabra
jabra
Status
LED
Volume down/
Skip track back
button
Microphone
ANC/
HearThrough
LED
ANC/
HearThrough
button
Magnetic zone
Mute/Voice
button
Volume up/
Skip track
button
Multi-function
button
6.1 Calls & music
Calls & music
Power on Hold (1 sec) the
Multi-function button
Power o Hold (3 sec) the
Multi-function button
Play/pause
music
Press the Multi-function
button, when listening to
music
Answer/end
call
Press the Multi-function
button
Reject call Double-press the
Multi-function button

16
ENGLISH
jabra
jabra
Answer/end
call or pause
music
Detach/attach the
Magnetic earbuds
Adjust volume
Press the Volume up or
Volume down button,
when listening to music or
on a call
Next track Hold (1 sec) the Volume up
button (smartphone only)
Previous track
Hold (1 sec) the
Volume down button
(smartphone only)
Battery status
Press the Volume up or
Volume down button,
when not listening to music
or on a call
Siri or Google
Now
Press the Mute/Voice
button, when not on a call
Mute/un-mute
microphone
Press the Mute/Voice
button, when on a call
Cycle between
ANC and
HearThrough
modes
Press the ANC/
HearThrough button

17
ENGLISH
6.2 Active Noise Cancellation (ANC)
The earbuds use Active Noise Cancellation
(ANC) to reduce outside disturbance, allowing
you to fully focus.
Press the ANC/HearThrough button to cycle
through the available options.

18
ENGLISH
6.3 HearThrough
HearThrough enables you to hear your
surroundings or engage in conversations
without needing to remove the earbuds.
Press the ANC/HearThrough button to cycle
through the available options.

19
ENGLISH
6.4 Voice guidance
Voice guidance are announcements intended
to guide you or give earbud status updates (e.g.
connection and battery status).
How to turn voice guidance On/Off
Voice guidance is enabled by default.
Voice Guidance On:
Ensure the earbuds
are powered on, and
then hold the
Mute/Voice button
for 5 seconds.
Voice Guidance Off:
Ensure the earbuds
are powered on, and
then hold the
Mute/Voice button
for 5 seconds.

20
ENGLISH
6.5 Siri or Google Now
Phone voice commands enable you to speak to
Siri or Google Now on your smartphone using
your earbuds. For more information on using
Siri or Google Now, please refer to your
smartphone’s user manual.
Phone voice commands
Activate Siri
or Google
Now (phone
dependent)
Press the Mute/Voice
button, when not on
a call
Voice assistant settings can be configured
using the Jabra Sound+ app.