Jabra Connect 5t Titanium Black User manual

Jabra Connect 5t - Titanium Black
How do I charge my Jabra Connect 5t?
To charge your Jabra Connect 5t, place the earbuds in the charging case
and close the lid. It takes up to 3 hours to fully charge the earbuds.
When you open the lid, the LEDs on the earbuds will flash red, yellow, or
green to indicate the battery status of the earbuds. The LED on the front of
the charging case will indicate the battery status of the charging case.
Fast charge the earbuds
When the earbuds are at low battery, 10 minutes of charge time will give up
to 60 minutes of battery. This fast charge option requires that the charging
case has a minimum of 30% battery. You can check the current battery
status of the earbuds and charging case in the Jabra Sound+ app.
Charge the charging case using the USB cable
It takes up to 3 hours to fully charge the earbuds and the charging case
using the supplied USB cable.
The charging case uses the standard USB voltage of 5V +- 0.25V. It is not
recommended to charge the earbuds using a power supply with a higher
voltage.
Charge the charging case using the Jabra wireless charging pad
15/11/2022 17:54
https://www.jabra.cn/supportpages/jabra-connect-5t/100-99182000-35/faq/3b9582cd-e7b0-4b6e-
97ea-8209d1d1d8c9
页 1 / 2

(available as an accessory)
Place the charging case in the center of the Jabra wireless charging pad.
The LED on the charging case will flash to indicate the charging case is
placed correctly. It takes up to 3 hours to fully charge the earbuds and the
charging case using the wireless charging pad.
Note
Charging a device using a charging pad may result in the device becoming
warm. The elevated temperature is within safe operating requirements and
has no bearing on the lifespan or performance of the device.
15/11/2022 17:54
https://www.jabra.cn/supportpages/jabra-connect-5t/100-99182000-35/faq/3b9582cd-e7b0-4b6e-
97ea-8209d1d1d8c9
页 2 / 2