Jacuzzi CETRA 536 User manual

cetra®536 whirlpool bath and soaking bath
from the ancient hymns of the greek gods comes cetra—Italian for “lyre”.
Like its namesake, the Cetra®whirlpool
bath is an undeniable classic—
an uncomplicated, sculptural form,
perfect for settings from traditional
to contemporary.
features:
• 4 fully adjustable TheraPro™ jets
• 2 AccuPro™ lumbar jets
• 2 AccuPro™ foot jets
• Sculpted armrest
• Contoured backrest
• Energy-efficient, self-draining pump
• Patented Fixed Air Flow System
• Slip-resistant bottom
• Exclusive Tru-Level™ self-leveling base system
• Drain included on whirlpool baths
cetra®536
whirlpool bath
model number: N875 – LH, N880 – RH
exterior dimensions:
60" long x 36" wide x 21¼" high
interior dimensions:
41½" long x 22" wide
# of Jets/type of Jets:
4 TheraPro™ Jets,
2 AccuPro™ Lumbar Jets,
2 AccuPro™ Foot Jets
operating gallons:
48 gallons
cetra®536
soaking bath
model number: N885
exterior dimensions:
60" long x 36" wide x 21¼" high
interior dimensions:
41½" long x 22" wide

Cetra®536 Whirlpool Bath
Model: N875, N880
Cetra® 536 Bath
Model: N885
Installation Notes
Refer to installation instructions included with fixture before beginning installation.
Please confirm product availability and specifications before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Electrical Components and Electrical Specifications do not apply to non-jetted baths.
Ordering Information
Product Code:
N875 Cetra® 536 Whirlpool Bath
Left Hand
N880 Cetra® 536 Whirlpool Bath
Right Hand
N885 Cetra® 536 Bath
• Right and Left Hand Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit: #X559
Rotary Drain Kit, 26” Cable: #8730
Trim Kit: 1 X TheraPro™ Jet Rings #D095
Trim Kit: 2 X AccuPro™ Jet Rings #J869
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
Technical Specifications
Dimensions
60” L x 36” W x 21-1/4” H
(1524 mm) L x (914 mm) W x (540 mm) H
Drain/Overflow
A: 18-1/2” (470 mm) B: 9” (229 mm)
Cutout
58” x 34-1/4”
Total Weight
N875, N880: 742 lb (337 kg) / 50 lb/sq. ft. (242 kg/m2)
N885: 707 lb (321 kg) / 47 lb/sq. ft. (230 kg/m2)
Operating Gallonage
48 U.S. Gal. (181 Liters)
Max. 55 U.S. Gal. (208 Liters)
Product Weight
N875, N880: 92 lb (42 kg)
N885: 57 lb (26 kg)
Skirt Mounting
Optional U-Frame
Electrical Specifications Models N875, N880 only
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
Heater (Optional) Models N875, N880 only
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
9"
60"
36"
18"
12" x 4"*
Motor
12" H x 18" L Service Access
Opt. Service Access
2"
5-3/4"
© Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino • CA • 91710 • www.jacuzzi.com
END VIEW
H
W
SIDE VIEW
L
2"
#FR28 07/07
DRAIN/OVERFLOW
A
B
Product Shown: Cetra® 536 Whirlpool Bath Left Hand Model: N875
* Measurements inside unit represent cutout in floor to allow for drain/overflow.
Minimum Service Access dimensions given.