Jadens JD-268BT User manual
Version: 2.0
Enter your questions here
How can we help you today?
warranty to 3 years with your order No.
support.jadens.com
Please kindly contact us if you have
any trouble or question when installing and using
1-800-752-7660
Scan the below QR code to talk with us
Customer Support
Scan or upload this QR code
using the WhatsApp camera
to add us
Customer Support
Extended Warranty
1. Appearance 1
1
2
3
3
5
11
16
24
24
28
28
28
32
32
33
33
2. Packing list
3. Printer connection
4. The suitable label size
5. How to feed label
6. Installation for Windows
7. Installation for Mac
8. Printer preference setting
10. Important Tips: Print label of multiple size using “Take a snap shot”
11. Frequently asked questions
9. Smartphone APP Setup
16. Safety tips
12. Pro tips
14. LED indicator
13. Driver removement
17. Maintenance
15. Specifications
See FAQ at support.jadens.com
If any accessories missing, please contact us to get support.
Release Latch
Print Head
Paper Cutter
Roller
Paper Guide
Power Supply Port
USB Cable Port
Power Switch(O=off I=on)
Paper Holder
Printer
Power Adapter & Cable USB Cable USB C to USB
Adapter:For Mac
U-disk:Instruction
video
1 Fan-fold Label Paper Holder User Manual
1.Appearance
2.Packing list
Feed/Reset Button
3.Printer Connection
Ensure the printer is OFF.
Use original power adapter only in case harm or injure.
Unplug if no use in a long time.
Ensure the printer is off
Connect the power
Connect the USB cable to the printer
Turn the power on
Attach the power cord to the adapter
Plug the power cord into the socket
Connect the printer and computer
Note:
1
23
45
67
See FAQ at support.jadens.com
Jadens printer works with any Thermal Direct Label, and compatible
with a width range from 1.57'' to 4.1'' and length over 1.18''
Ideal for 4''*6''
4.The suitable label size
Label standard size
5.How to feed label
Ensure the printer is off
Pull the release latch to open the cover
Load the label and adjust the paper guide to
fit the width of paper.
The label you peel off should be facing up
(toward the ceiling)
Carefully close the cover
1 2
34
See FAQ at support.jadens.com
See FAQ at support.jadens.com
Turn the power on
Tips:
Anytime you change your label, run the
automatic label identification. Press
and hold the feed button until you hear
one beep.
Jadens will start automatic label identification,
the label will go back and forth for several times
and then be positioned at the tear-off point. Jadens
is ready to print.
Fan-fold Type Label Loading Roll Type Label Loading
56
See FAQ at support.jadens.com
Win 7 or later Chrome book, Linux, Win ARM
Installation guide video in U-disk for better reference.
a. Connect power and computer(Please skip this step if you have finished it before.)
Copy the driver in the U-disk(Label Printer Driver Setup.exe) to your
PC desk, open and install it as below:
b. Install the driver and printer for Windows
6.Installation for Windows
Recommend to close security software before installation in case of
preventing installation, and you can open it again after installation.
Note:
(You can also download ' Driver for Windows (JD-268BT)' from
https://www.jadens.com/support/download/label-printer-drivers/
Driver version may be updated, see latest info at support.jadens.com.
√×
See FAQ at support.jadens.com
If you get the tips ' Printer Disconnected'
that means your computer and printer
are not connected. Please connect them
via USB port or turn on power, then install
again.
12
3
Click ' Get USB Port' to get the USB port which your computer connect to the printer, and then
click ' Setup'' . The printer will be successfully set up.
See FAQ at support.jadens.com
a.(Keep the printer and computer connected with USB cable). Click' Setting' >' Devices' >
'Bluetooth & other devices' >' Add Bluetooth or other device' .
：
c.After setting up the printer, check your computer if the printer has installed or not.
Go to the ' Setting'> click' Device' >click' Printer & scanners' , and then you will find the printer '
Label Printer(4inch)' . Click ' Manage' to print a test page and print labels successfully, that means
you have set up the printer successfully.
If you can' t print successfully, please restart your computer and printer, then install driver again.
Repeat installation will create duplicate copies of the printer in your operating system
such as '' Printer(4inch)(1,2�) ' . Only keep and use the latest one you install.
Note:
See FAQ at support.jadens.com
See FAQ at support.jadens.com
：
a.Click ' Bluetooth & other device' > ' More Bluetooth options' > 'COM Ports' > Check
OUTGOING port of the Bluetooth ' JD-268BT_ XXXX'' (XXXX are suffixes, which will vary depending
on the different printer) and mark down the COM number (For example, here is COM3).
1
3
2
Click'Printer & Scanners'> Find'Label Printer(4inch)'>'Manage'>'Printer properties'>'Ports'
> Check in the Ports match to your Bluetooth Port(For example, here is COM3)>Click'OK'.
b.Change printer's port to the COM that matches to the Bluetooth.
See FAQ at support.jadens.com
If you can't find which COM
port match with Bluetooth
port, please restart your
computer and printer, then
install driver again.
1
2
1
2
3
Note:
Please ignore the message
'Driver is unavailable' , as
it is normal and won't affect
the printing.
b.Copy driver 'Label Printer-MacOS.pkg'to desk and install it.(You can also download
'Driver for Mac (JD-268BT)' from
http://www.jadens.com/support/download/label-printer-drivers/
Driver version may be updated, see latest info at support.jadens.com.
7. Installation for Mac
a.Connect power and computer
JADENS is only compatible with MAC OS V 10.9 or later.
Installation guide video in U-disk for better reference.
See FAQ at support.jadens.com
Note:
If you can't print seccessfully, please restart your computer and
printer, install again.
c.Now you can unplug the USB cable from computer, and then Open PDF file (recommend to use
Adobe)>Choose printer named 'Label Printer(4inch)'>You may set up printer preference like
darkness, speed, size, then click 'Print' (via Bluetooth).
c. Open 'System Preferences', and click on 'Security & Privacy'.(If you don't see the warning ,
you can skip this step)
d. Click on 'Open AnyWay' button. (lf you don't see the warning, you can skip this step)
See FAQ at support.jadens.com
e. Click on 'open' and continue to install the printer. Follow the installation steps until you see
' The installation was successful' window.
f. Open 'System Preferences'>>click'Printer and Scanners'.
See FAQ at support.jadens.com
g. Click'+' to add a new printer.
h. Click 'Thermal Label Printer', and choose 'successfully'in the
drop down menu.
See FAQ at support.jadens.com
i. Choose'Label Printer',click'OK'.
j. Click 'Add', now the printer has been installed in your Mac book
successfully.
See FAQ at support.jadens.com
1. Now you can print directly, if you want to adjust the printing density, printing speed or
other parameter, please refer to 'part 8 Printer preference setting'.
2. If you can't print seccessfully, please restart your computer and install driver again.
Note:
8. Printer preference setting
8.1. Printer preference setting for windows
(1)Setting the paper quality
Go to the 'Setting'>> click 'Device'>>click 'Printer & scanners'>>find the printer 'Label Printer'
>>Click 'Manage'>> click 'Printer Preference'. In this part, you can set the print page size and print
speed and density of the label.
a. Go to 'Page Setup'. According to the label size, choose the corresponding page size. Generally,
most shipping labels are 4"*6" size.
See FAQ at support.jadens.com
b. In the 'Page Quality', you can change
the printing speed and printing
darkness.
Especially for density. If the labels
print out light or not clear, you can
change the density. For Windows
system please set the density at
8-12. For Mac system please set the
density at 2-5.
See FAQ at support.jadens.com
Table of contents
Other Jadens Label Maker manuals
