JAI CV-M10BX Installation manual

Progressive Scan
CCD Camera
CV-M10 series (Rev.B)
Operation Manual
Applicable only for serial no.
CV-M10BX
EIA : E010201 -
CCIR : C010501 -
CV-M10RS
EIA : E010601
-
CCIR : C010731 -

.____
.-____
CV-M10
k
ENGLISH VERSION
DO NOT OPEN
CAUTION:
TO REDUCE THE
SHOCK, DO NOT
BACK), NO USER
INSIDE.
REFER SERVICING
RISK OF ELECTRIC
REMOVE COVER (OR
SERVICEABLE PARTS
TO QUALIFIED SERVICE I
The lighting flash with arrowhead symbol, within an equilateral triangle, is
intend to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
1
.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
8
The slash within a circle is intended to alert the user to the presence of
prohibition of any klnd of operation, maintenance and storage.
CD
The abstraction within a circle is intended to alert the user to presence
of prohibition to disassemble the product’s.
The abstraction within a circle is intended to alert the user to power off
the product’s and to take off the plug.
The abstraction within a
of prohibition to expose
of wet place.
circle intended alert the user to presence
the product’s to rain, moisture or any kind

CV-M10
Precautions
A@
A@
A
1
AA
Do not attempt to disassemble this camera.
To prevent electric shock, do not remove cover. There
are no user-serviceable parts inside. Refer servicing to
qualified service personnel.
Do not expose this camera to rain or moisture.
Do not face this camera towards the sun, extreme
bright light or light reflecting objects.
Even when this camera is not in use, put the supplied
shade-cap on the camera head.
Handle this camera with the maximum care.
Operate this camera only from the type of power
source indicated on the camera.
Power off the camera during any modification such as
changes of jumper-line and jumper-register.
USER’S RECORD
The production serial number are
shown on the bottom of camera
Model Name
:
Serial No. :

CV-M1 0
Typical CCD Characteristics
The following effects may be observed on the video monitor screen do not
indicate any fault of the CCD camera, but do associate with typical CCD
characteristics.
*
*
*
*
V. Smear
Due to an excessive bright object such as electric lighting, sun or strong
reflection, vertical smear may be visible on the video monitor screen. This
phenomenon is related to the
employed in the CCD. characteristics
of Interline Transfer System
Vertical Smear
Excessive bright object
Video monitor screen
V. Aliasing
When the CCD camera shoots stripes, straight lines or similar patterns,
jagged image on the monitor may be appeared.
Blemishes
An array of individual sensor elements (pixel) in the CCD image sensor
may consist of blemish, although it is not a problem in practical
operation.
Patterned Noise
When the CCD camera shoots a dark object at high temperature, fixed
pattern noise (dots)
monitor screen.
may be appeared over the entire area of the video

CV-M10
Table of Contents
1.
2.
3.
4.
5.
6.
7.
8.
9.
General ........................................................................................................
Main Features.............................................................................................
Standard Composition..............................................................................
Locations....................................................................................................
Pin Assignment.........................................................................................
Functions
...................................................................................................
Operation and Mode Setting...................................................................
1)
2)
3)
4)
5)
6)
7)
8)
9)
Shutter “OFF”........................................................................................
Normal Speed Shutter “ON”...............................................................
High Speed Shutter “ON”....................................................................
Long Time Exposure "ON”
................................................................
Random Trigger...................................................................................
Gain Control.........................................................................................
Interlace System..................................................................................
Gamma Correction..............................................................................
RS-232C Communication Mode..........................................................
Ext/Int HD Operation & Pixel clock output
...........................................
Adjustment of video signal output
level
...............................................
10 . External Appearance..............................................................................
11 . Specifications..........................................................................................
1
1
2
3
4
6
12
13
13
14
15
16
18
18
18
18
21
23
24
25

I
CV-M10
1. General
The CV-M10 series (Rev.B) is a newly designed machine vision camera
equipped with a progressive scanning CCD image sensor.
With top
features as progressive scanning and square shaped pixels, the CV-M10
series offers a superb image quality in versatile applications such as
machine visions, high speed video capturing, pattern recognition, etc.
Model Designation
*
*
CV-M10BXE/RSE EIA (VGA corresponded) versions are available with
the following features.
- CV-M10BXE is the basic progressive scan camera with full
functions.
-
CV-M10RSE is the extended version with digital setup function via
RS232C serial control.
CV-M10BXC/RSC CCIR versions are available with the following
features.
-
CV-M10BXC is the basic progressive scan camera with full
functions.
-
CV-M10RSC is the extended version with digital setup function via
RS232C serial control.
2. Main features
* Progressive Scan CCD sensor of 1/2" format, interline-transfer type
*
Square Pixel
*
High Speed Shutter
-
CV-M10BXE/RSE: up to 1/800,000 sec.
- CV-M10BXC/RSC : up to l/917,000 sec.
(High speed shutter in CCIR verslon is in function only at Random trigger shutter mode.
Without random trigger, it works up to 1/10000 sec.)
-1-

CV-M10
V
*
*
*
*
*
*
Random Trigger Shutter
-
CV- M10BXE/RSE up to 1/800,000 sec.
-CV-M10BXC/RSC up to 1/917,000 sec.
High Resolution
-
CV-M10BXE/RSE H. 530 and V. 400 TV lines (effective pixel
elements 659H x 494V)
-CV-M10BXC/RSC H. 550 and V. 400 TV lines (effective pixel
elements 782H x 582V)
VGA Format
The effective elements of CV-M10BXE/BXC correspond to VGA
specifications, besides it produces video signal according to EIA TV
Standards.
Electronics are accommodated in the durable housing of compact
size.
Digital set up via RS232C serial control (CV-M10RSE/RSC only)
Pixel clock output (User’s option)
3. Standard Composition
1) Camera main body
x 1
2) 12P Multi connector
x 1
3) 6P Multi connector
x 1
4) Tripod mount plate
x 1
5) Operation manual
x 1
-2-

4. Locations
0 Lens Mount
0 CCD sensor
@ Video output 1
@Video output 2
@ SW1 switch
@6 Pin connector
0 12 Pin connector
@I GAIN
@I Tripod mount plate
: C-mount type
Note : Rear protrusion on the C-mount lens must be less
than 7mm (0.28 inch approx.)
: Interline-transfer type CCD with On-chip lens
: VS1 .0Vp-p output
:
VS1 .ovp-p output
: Switch on the rear panel to set shutter speed
and other function modes
: Input of external trigger (WEN output) and
In/Output of communication signals
: Input of 12VDC power, external sync signals
and output of Video signal
: Adjusting Gain level of the video output 1
: Fixing the camera head on tripod or others
CV-M10 BX
CV-M10RS
-3-

CV-M10
5. Pin Assignment
1)
12P Multi connector (DC-IN / SYNC)
Pin no
1
2
3
4
5
6*
7*
8
g*
10
k
11
12
HA10A-1 0P-12S Hirose
* Note : 1. To change the signal output on pin no. 6,7 and 9, it is necessary to make
jumper setting.
See 8.
Ext/Int HD/VD Operation and Pixel Clock Output for more information.
Pin No. Factory Pre-set
I
Others
1
6
Ext HD input Int HD output
7
Ext VD input Int VD output
I
9
1 Video-2 output 1
Pixel clock output
2. Video-2 output on pin no. 9 is effective only at 2:1 interlace mode.
3. Do not input Ext. VD signal at pin no.7 of 12P Multi connector, as it causes a
failure in random trigger mode operation.
-4-