JAI JAI-M1250K User manual

[phone] | [email protected] | artisantg.com
-~
ARTISAN
®
~I
TECHNOLOGY
GROUP
Your definitive source
for
quality
pre-owned
equipment.
Artisan Technology
Group
Full-service,
independent
repair
center
with
experienced
engineers
and
technicians
on staff.
We
buy
your
excess,
underutilized,
and
idle
equipment
along
with
credit
for
buybacks
and
trade-ins
.
Custom
engineering
so
your
equipment
works
exactly as
you
specify.
•
Critical
and
expedited
services
•
Leasing
/
Rentals/
Demos
• In
stock/
Ready-to-ship
•
!TAR-certified
secure
asset
solutions
Expert
team
ITrust
guarantee
I
100%
satisfaction
All
tr
ademarks,
br
a
nd
names, a
nd
br
a
nd
s a
pp
earing here
in
are
th
e property of
th
e
ir
r
es
pecti
ve
ow
ner
s.
Find the JAI / Pulnix JAI-M1250K at our website: Click HERE

DSP Micro Head
CCD Colour Camera
JAI-M1000K series
(JAI-M1000K / M1050K / M1200K / M1212K / M1250)
Operation Manual

ENGLISH VERSION
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK), NO USER SERVICEABLE PARTS
REFER SERVICING TO QUALIFIED SERVICE
The lighting flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.

JAI-M1000K series
Table of contents
Declaration of CE Conformity
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Precautions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User’ Record
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
1. General
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. Main Features
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. Standard Composition
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
4. External Appearance, Locations and Functions . . . . . . . . 6
5. Pin Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
6. Operation and Mode Setting
1) ON-SCREEN DIRECT CONTROL
...............................
2) ON-SCREEN REMOTE CONTROL
.............................
3)
RS-232CSERIALREMOTECONTROL
.....................
7. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
3
4
4
11
13
13
14
- 1 -

JAI-M1000K series
Declaration of Conformity
As defined by the Council Directive 89/336/EEC
EMC (Electromagnetic Compatibility),
we herewith declare that this product
complies with the following provisions applying to it.
EN-50081-l
EN-500824
- 2 -

JAI-M1000K series
Precautions
* Do not attempt to disassemble this camera.
* To prevent electric shock, do not remove cover. There are no user-
serviceable parts inside.Refer servicing to qualified service personel.
* Do not expose this camera to rain or moisture.
*
*
Do not face this camera towards the sun-exterme bright light or light
reflecting objects. Even when this camera is not in use, put the supplied
shade-cap on the lens mount.
Handle this camera with the maximum care.
* Operate this camera only from the type of power source indicated on
the camera.
* Power off the camera during any modification such as changes of
jumper-line and jumper-register.
USER’S RECORD
The Model name and the production serial number
are shown on the bottom of the camera.
Model Name
:
Serial No. :
-3-

JAI-M1000K series
1. General
JAI-M1000K series CCD Color Camera is a new series of Digital
Micro Head Cameras utilizing the most advanced DSP (Digital Signal
Processing) technologies with Micro-Computer setup capability.
JAI-M1000K series gives you the maximum availability in your operation
with the attractive features such as High Resolution, Y/C and RGB extra
outputs, One-Push White Balance, Backlight Compensation, etc.
Please read this Operation Manual throughly, and retain with you.
2. Main Features
A Micro camera head
<
JAI-M1000K : 2m Camera Cable
(6 12mm 1/3" CCD Sensor
JAI-M1050K : 5m Camera Cable
@ 17mm 1/2" CCD Senso
JAI-M1200K : 2m Camera Cable
JAI-M1212K : 2m Camera Cable
JAI-M1250K : 5m Camera Cable
* DSP (Digital Signal Processing) circuits for high quality level of
pictures

JAI-M1000K series
A ( ON SCREEN ) display for camera set-up
The following control-functions can be displayed on the monitor
screen, and can be set into the desired condition through the front
panel of the CCU (Camera control Unit), or the optional REMOTE
CONTROL UNIT (RS-232C Serial Communication).
- White Balance
- Electronic Shutter
- AGC (Auto Gain Control)
- Backlight Compensation
- Negative Polarity
* Y/C and RGB separate outputs provided as standard.
* Backlight Compensation circuit for shooting in unusual lighting
conditions.
Standard Compositon
1) Camera Head X1
2) CCU (Camera Control Unit) X1
3) Camera Cable
Xl%
4) Power Plug (Hirose HR10A/7P/6S)
x 1
5) Y/C Plug x1
z Camera cable for JAI-M1000K is directly mounted to the camera head.
The cable connection for the other cameras is made by connector,

JAI-M1000K series
4. External Appearance, Locations and Functions
Camera Control Unit (CCU)
- 6 -

JAI-M1000K series
Camera Head
ø12mm:JAI-MlOOOK, JAI-M1050K
$17mm:
JAI-M1250K, JAI-M1212K
A-
øl7mm:JAI-M1200K

JAI-M1000K series
0 DC 12V Power Input Connector
@ RGB Output Connector
Since this connector has an output of Video signal at the pin no.6, do
not use it together with the Video signal from Video Output Connector,
in order to avoid the double-termination.
@ Y/C Output Connector
@I Video Output Connector
@ Remote Connector
Use optional Remote Control Unit for camera setup via RS-232C.
More functions than that of Remote Control Unit can be controlled via
RS-232C from Personal Computer. Inquire for further instructions on
type, software and etc. of the personal computer.
@I Ext. Sync Input Connector to supply Composite Sync or Video signal
to lock the camera externally. (Note : Sub-carrier Phase can not be
locked to the master sync.)
0 Power Switch
@I ON SCREEN Switch to display the menu on the monitor.
@I Switch for ONE-PUSH White Balance
Push this button once so that white balance can be adjusted quickly,
picking up the white object in the image.

JAI-M1000K series
- @I Function Swtich
For details, refer to the section of “Operation and Mode Setting”.
Camera Cable Connector
Lens Mount
Use optional lenses available from us.
Focus Lock Ring to fix the lens on the proper focusing position
Camera Cable Connector
5.Pin
Assignment (Connectors located on the rear panel of the
ccu)
1) DC Power Input Connector
1
6
#1
NC
# 2External Sync
2
5
# 3
Ground
# 4
Ground
#5 NC
3
4
#6
+12V DC In
-9-

*
JAI-M1000K series
2) Y/C Output Connector
3) RGB Output Connector
9 8 7 6
4) Remote Connector
#
1 Ground
#2 Ground
#3Y output
#4 c output
# 1
Ground
#2
Ground
#3 R Output
# 4 G Output
# 5 B output
#
6 Video Output
#7 Sync Output
#8
Ground
#9
Ground
#1 SD
#2 RD
#3 Ground
#4 + 3.3V
- 10 -

JAI-M1000K series
6. Operation and Mode Setting
1) ON-SCREEN DIRECT CONTROL
Set DISPLAY ON/OFF switch provided on the front panel of CCU to ON
position so that the functions described below can be seen on the
monitor screen, and the requested conditions of each function can be
selected.
*Adjustable
I
\
Functions
FUNCTION MODE
Nhite Balance
Electronic Shutter
AGC GAIN
I
1. AUTO (TTL system)
2. Select 3200 K, 4600 K, 6600 K
3. One Push
4. Manual
1.
Off
2. Select 1/2000, 1/4000, 1/10000,
3. CCD Iris (Auto Shutter up to
1/100000 sec.)
4. Flicker-less
1. OFF (Normal Mode)
2. ON (+12dB)
3. Manual (-3dB - +15dB
1. OFF (Normal Mode)
2. Pattern 1 (Priority at Center)
3. Pattern 2 (Priority at Corners)
1. OFF (Normal mode
: Positive)
2. ON (Reversed Y/C signal polarity :
Negative)
Back-Light Compensation
Negative Polarity
Note : Auto White Balance
Due to the TTL system employed for Auto White Balance, it
detects the highest video level in the image as a white color.
- 11 -

JAI-M1000K series
Therefore, it is necessary to place the camera to a proper
position where the camera does not pick up the high
luminace
light such as spot light and fluorescent lamp.
* Screen Display (example)
Functions Mode
White balance Auto
Shutter Off
AGC On
Back-light Ptm. 1
NEGA
Off
(I) To start adjustment, push “DISPLAY” button so that Function and
Mode menu will appear on the monitor screen.
(2) Use A or V key to select FUNCTlON. The selected function will
be flashing.
(3) While FUNCTlON you desired is flashing, press > key to select
MODE. The selected MODE will be flashing.
(4) Press A or V key to change MODE.
(5) Go to the next FUNCTlON if needed, and repeat (2) - (4).
In case you select MODE "R, B Gain” for White Balance or MODE
“Manual” for AGC, the level of Gain can be adjusted by the cursor
using A (upper level) or
V (lower level).
Note : One push white balance can be functioned only when the
MODE “One-Push” for White Balance is selected.
- 12 -

JAI-M1000K series
Pattern for Backlight Compel
nsation
Pattern 1 Pattern 2 Prior Area to Detect
1 st priority
H
2nd priority
2) ON-SCREEN REMOTE CONTROL
With the optional hand-held Remote Control Unit, all functions as
shown in the above 6-1) ON SCREEN DIRECT CONTROL can be set in
the same manner as described in (1)
- (5).
3) RS-232C SERIAL REMOTE CONTROL
In addition to the adjustable functions by “ON SCREEN DIRECT
VTROL”,
there are 4 more control functions as(and REMOTE) COI
follows.
- Negative polarity
- Enhancer :
-Gamma :
-Colour Gain :
: OFF for Positive, ON for Negative
(It is the same as “on screen control”, however,
separated control of Y and C signal in Negative
mode is possible.)
H. and V. Aperture correction
0.45, 0.60, 1.0 selectable
G, R-Y, R-GIG, R-Y,
B-G/G,R-Y, B-G (-)/
G, B-Y, B-G/G, B-Y, R-G/G, B-Y, R-G
(-)
- 13 -

JAI-M1000K series
7. Specifications
Pick-up Device
Picture Element
Scanning Area
Scanning System
sync. system
Scanning Frequency
H. Resolution
Sensitivity
Min. Object Illumination
S/N Ratio
Viieo output
\
White Balance \
Electronic Shutter Speed
AGC
\
\~
i
Backlight Compensation
Negative Polarity
Camera Setup Function
Lens Mount
Operating Temperature
Operating Humidii
Power
Power Consumption
Head
Size, Weight & ecu
Cable length Cable
JAI-M1000K
1 JAI-M100K
JAI-Ml200K
1 JAI-M1000K 1 JAI-M1000K
Interline CCD
NTSC : 768 (H) x 494 (V)
PAL : 752 (H) x 692 (V)
4.9mmx3.7nml (l/3”)
6.6mmx4.9nun (l/2”)
NTSC : 525 lines 2 : 1 interlace
PAL
: 625 lines 2 : 1 Interlace
International/External (by VS or Sync, 1.OVp-p 75 D )
NTSC : 15134Khz (H) 69.94 Hz (V)
PAL :
15.625KHz (H) 50 Hz (V)
NTSCIPAL 450 TV lines
1000 Lux F9.0
4 Lux Fl.4
NTSC : 49dB or more (AGC DR, Ganuna DR)
PAL : 46d6 or more (AGC Off, Gamma Ott)
VBS l.OVpp 75 0, YIC, ROB
3200K, 46OOK. 6600K, Auto, Manual, One-Push
Off, 1/250,1W00,111000, 112000, 114000, lHOOO0, Auto, Flicker-less
Off, On, Manual
Off, Pattern 1, Pattern 2
Provided
On-Screen Control or Remote Control via RS232C
Special Mount (M10.5x0.5)
Special Mount (MlS.bxO.5)
- IO c- +60 95 (14 ’F - 122 o F)
20 % - 60 %
I DC +12v f 10%
4.5 w
d 12x36.5mnV5.7g
Q l7x5OIl5g
4 l7x45HSg
llOmrn(W) x 40mm (H) x 154mm (D)/sSOg
2m 4 3.3
5m Q 4.6 2m
Q 4.6
2m 6 3.3
5m Q 4.6
LWectly mounted
Above specifications are subject to change without previous notice.
- 14 -

Memo :
Printed in Japan
PJM1K1296A

Artisan Technology Group is an independent supplier of quality pre-owned equipment
Gold-standard solutions
Extend the life of your critical industrial,
commercial, and military systems
with our
superior service and support.
We buy equipment
Planning to upgrade your current
equipment? Have surplus equipment taking
up shelf space? We'll give it a
new home.
Learn more!
Visit us at artisantg.com for more info
on price quotes, drivers, technical
specifications, manuals, and documentation.
Artisan Scientific Corporation dba Artisan Technology Group is not an affiliate, representative, or authorized distributor for any manufacturer listed herein.
We're here to make your life easier. How can we help you today?
[phone] [e-mail] Iartisantg.com