Jam HX-EP410A User manual

EN 1
Live
Loud
HX-EP410A
Instruction Book

EN 2
CONTENTS
A – 2 earbuds
B – Portable charging case
C – 3 sizes of eartips
D – Micro USB cord
E – Welcome card
F – Legal card
CONTROLS
A – Power on/off/play/pause button
B – Earbud status light
C – Earbud charging contacts
D – Micro USB charging port – to
charge the portable case
E – Battery Indicator Light
TABLE OF CONTENTS
English ........................................................ 2
Français ...................................................... 8
Español..................................................... 15
Deutsch..................................................... 22
Nederlands............................................... 28
Italiano...................................................... 34
한국어 ....................................................... 40
中文........................................................... 46

EN 3
SET UP
CONNECT BOTH EARBUDS
CHARGING YOUR EARBUDS
To charge your earbuds, place them into the
portable case. The red LEDs show that they are
charging. If the red LEDs do not appear when
placed in the case, adjust the earbuds to make
sure they are in line with the charging contacts.
When fully charged, the LEDs will shut off.
CHARGING YOUR PORTABLE CASE
Plug the small end of the micro USB cable into
the micro USB port, located on the back of the
case. The LED on the case will show solid red
when charging. When the portable case is fully
charged, the LED lights will turn off.
STEP 1 – TURNING ON THE EARBUDS
Your earbuds will automatically turn on when
taken out of the portable charging case. If you
need to turn them on manually, you can press
and hold the play/pause button on both earbuds
for 3 seconds.
STEP 2 – CONNECTING THE EARBUDS TO
EACHOTHER
When you take the earbuds out of their case,
they will automatically sync to each other. The
master earbud (left) LED will ash blue and red
alternatively, while the slave earbud (right) LED
will slow ash blue. Your earbuds are now in
pairing mode and searching for a Bluetooth®
device to connect to.
If your earbuds don’t sync to each other
automatically, double press the “play/pause” button
on both earbuds at the same time. This will put
your earbuds into sync mode. Once connected, the
left earbud LED will ash blue and red alternatively,
while the right earbud LED will slow ash blue. Your
earbuds are now in pairing mode and searching for
a Bluetooth®device to connect to.
3s 2x

EN 4
STEP 3 – CONNECTING TO A DEVICE
Enable Bluetooth®on your device. From the
Bluetooth®menu, select “Jam Live Loud” When
the device and Live Loud are connected, you will
hear a tone and the LED’s will slow ash blue.
This means pairing is complete.
CONNECT 1 EARBUD
Connect the earbud for mono sound. This is a
great option if you want to hear your surroundings
as well as your music.
STEP 1 – TURNING ON THE EARBUD
Your earbud will automatically turn on when taken
out of the portable charging case. If you need to
turn it on manually, you can press and hold the
play/pause button on both earbuds for 3seconds.
STEP 2 – PAIRING MODE
The earbud automatically turns on and enters
pairing mode when removed from the charging
case. The LED will ash red and blue on the left
earbud and a blue LED will slow ash on the right
earbud when pairing. Earbuds will power off after
6 minutes if not paired.
STEP 3 – CONNECTING TO A DEVICE
Enable Bluetooth®on your device. From the
Bluetooth®menu, select “JAM Live Loud.”
When the device and JAM Live Loud are
connected, you will hear a tone and the LED’s will
slow ash blue. This means pairing is complete.
JAM Live Loud
Bluetooth®
Devices
JAM Live Loud
Bluetooth®
Devices
3s
3s
To turn off your earbuds, place the earbuds back
in your case, or press and hold the “play/pause”
button on the earbuds for 3 seconds.
TURNING OFF YOUR EARBUDS

EN 5
LED INDICATORS BASIC FUNCTIONS
EARBUDS IN CHARGING CASE MUSIC
EARBUD IN MONO USE
PORTABLE CHARGING CASE
CALLS
EARBUDS IN USE
OTHER
TROUBLESHOOTING
1. Turn off Bluetooth®on your device.
2. Take earbuds out of your case.
3. Press and hold “play/pause” button for 3 seconds on
both earbuds to turn them off.
4. Press and hold “play/pause” button on both earbuds for
3 seconds to turn them on.
5. Earbuds should automatically go into sync mode once they
are powered on. The master earbud (left) LED will ash
blue and red alternatively, while the slave earbud (right)
LED will slow ash blue. If they do not automatically go
into sync mode, quickly press the play/pause button on the
left earbud ve times to erase the Bluetooth®settings and
put the earbuds into sync mode.
6. Turn on Bluetooth®on your device.
7. Pair to “Jam Live Loud”
8. Earbuds not disconnecting from your device? The Live
Loud earbuds may automatically connect to your device
if put in a charging case that has no battery left. For the
best experience, periodically charge the case to ensure
that it always has battery life.
Solid red Charging
LED off Charging complete
Play/Pause Press either play/pause button
once
Forward Track Quickly double press the play/
pause button on right earbud
twice
Backward Track Quickly double press the play/
pause button on left earbud
twice
Volume Up Press and hold right earbud for
2 seconds
Volume Down Press and hold left earbud for
2 seconds
Flashing red/blue Earbud in pairing mode
Slow ash blue Earbud paired with device
Solid red Charging
LED off Charging complete
Pick up a call Press either play/pause button
once
Decline a call Press and hold either play/
pause button for 2 seconds
End a call Press either play/pause button
once
Take a second incoming call Press either play/pause button
once
Decline a second incoming call Quickly press either play/
pause button twice
Swap between two calls Press either play/pause button
twice
Left earbud (master) ash
blue and red alternatively, right
earbud (slave) slow ash blue
Earbuds in pairing mode
Slow ash blue Paired with device
Activate Siri/Google Assist Quickly triple-press either play/
pause button
Check battery level of earbuds Look at smartphone
Turn off earbud Press and hold play/pause
button for 3 seconds
USING YOUR PORTABLE CHARGING CASE
With a full charge, your portable case can recharge your earbuds up
to 3.5 times, giving you 17+ hours total of listening time.