Jameson JS-315BT User manual

First complete the electrical connections and then check for correctness.
Be sure you test all connections first, and then follow these steps to install this unit.
1. Make sure the ignition is turned off, and then disconnect the cable from the vehicle
battery's negative (-) terminal.
2. Disconnect the wire harness and the antenna.
3. Remove the detachable panel and decorative
enclosure frame and place on one side.
4.Insert the two brackets into the left and right
sides of the chassis, as shownin the following
figure, and separate the chassis from the sleeve.
5.Insert the installation sleeve into the center
console to be installed, and bend the clip using
a screwdriver. Make sure the locking rod is flush with the mounting sleeve and does not
protrude. 6.Connect cables as shown in the Wiring diagram.
7.Insert the car radio into the mounting sleeve. 8.Install decorative enclosure frame.
This unit can be installed in any dashboard Having
an opening as shown below:
INSTALLATION
PRODUCT FEATURES
WARNINGS & PRECAUTIONS
Installation Procedures
Installation Opening
To Install The Car Radio
LCD: VA-LCD DISPLAY
To avoid risk of serious injury or possble violation of laws,please read thefollowing
thoroughly before installation or connecting.
1.This product is designed specifically for use with 12 volt, negative ground electrical
systems only.
2.Havina the wirina and installation done by exnert.
Be sure to diconnect the cable from the negative battery terminal whileinstalltion.
3.Never set the volume of this product so high that you cannot hear outside traffic and
emerency vehicles.
4.This apparatus shall not be exposed to dripping or splashing, and no object filled with
liquids,shall be placed on the apparatus.
5.Fuses shall be replaced only with the correct type and fuse value,and only when the
apparatus is powered off.
6.To prevent a short circuit,never put or leave any metallic objects(such as coins or
metallic tools)inside the unit.
Bluetooth: Version 5.1
Bluetooth Music: Support
Push to Talk: Support
EQ: 32 band, 8 Preset
Pre-Output: 4CH x 2V
Max Power: 4 x 60W
Radio: Preset 18FM
APP Control: iOS and Android Phone
Charge: Front USB 2A
Audio Format: MP3,WMA,AAC,FLAC,APE
Key Light: Multi Color
PARAMETER
Bracket key
Bracket key

BAND
MODE
EQ
In radio mode short press to switch FM1/FM2/FM3,Long press to radio
to auto search the channel.
When the call comes, short press to answer the call (bluetooth
connctionquird).
In call mode, short press to switch sound channel (car horn or handset).
Short press to switch EQ mode,Long press to radio to short press to voice
key (bluetooth connection required, Panel keys must support this function) .
(Reset function) button. Hands-free Microphone.
Auxiliary input jack. IR remote sensor.
TF Card Slot. USB Port for Music Playback.
USB Port for Charging.
Note: The media USB port of this car radio also supports charging for
iPhone /android mobile phone. The maximum charging ability is 5V/2.1A.
Volume control rotates to add and subtract sound.
Short press the knob to set the menu function.
Long press the knob to display the time function.
Preset 5/Preset 6
Preset 4
Preset 3
Preset 2
Preset 1
Previous/Next track
Playback/Pause
Intro Playback
Repeat Playback
Random Playback
Previous/Next folder
Return key function in menu state.
Short press to switch mode function.
Press to mute, Press an hold to shutdown.
In,call mode, press to end call.
Seek a station manually
Radio Status
BASIC FUNCTIONS OF PANEL KEYS
USB/BT Music Status
ACCESSORY
LIST
Remote x1ISO Male Connector x2
Diassemble keys x2 User Manual / Warranty Card / Service Manual
Please check the following accessories after opening the package:
CLKAMS
V+
V-
MENU
SRC
BAND
Service Manual
Warranty Card

REMOTE OPERATION
Mute
Source
Menu
Previous
Answer call
Reject call
Power off
Volume up
Return
Next
Band select
Volume down
Clock Display
Automatic station search
Install the battery
CR2025
CLKAMS
V+
V-
MENU
SRC
BAND

Press 1
Auto memory
Band selection
Seek a station manually
Store a station Press and hold 1 - 6
Press and hold 18FM
Press and hold
Press
Press
previous frequency step by
step Search the next or
Press 2
Press 3 (REPEAT ONE.REPEAT DIR.REPEAT ALL)
Press 5 / 6
Press 4 (ON/OFF)
Track selection
Fast playback
Playback/Pause
Track pre-play
Repeat playback
Random playback
Folder selection
Answer a call
End a call
Adjust call volume
Previous track
Next track
Playback/Pause
Turn on the knob
Switch the car horn or mobilephone handset
Press
Press
Press
Press
Press
Press
Bluetooth Basic & Music Operation
1.When there is no pairing, in any mode, the BT1 on the LCD will flash, andd the
pairing can be performed at this time.
2. Turn on the phone's Bluetooth to Search CAR BT.
3.Click on the CAR BT on the phone to connect. After the connection is successful, the
BT1 will stop flashing.
4. When pairing is complete,the mobile phone audio will automatically transfer to the
car audio system whenever a call is made or received, or when the mobile phone plays
music.
For the first time pairing the car MP3 with the Bluetooth of the mobile phone, please
follow the following steps:
Press
Press and hold
USB&TF CARD PLAYBACK
BLUETOOTH OPERATION
RADIO OPERTION
To Operation(panel)
Operation(panel)
Remark
To
Operation(panel)
To
BAND
BAND
BAND
BAND
FM1/FM2/FM3
(In a call)
(In a call)

1.Press the knob to enter the [MENU].
2.Rotate the knob to select, press down the knob to enter the setting, then rotate the
knob to set according to your preference, and then press down the knob to confirm the
setting.
MENU SETTINGS
AUDIO
PRESET EQ
NATURAL/POP/CLASS/ROCK/JAZZ/FLAT/SUPER BASS
/USER (User setting Adjustable frequency: 30Hz/60Hz/
80Hz/100Hz/120Hz/160Hz/250Hz/400Hz/600Hz/800Hz/
1KHz/1.5KHz/2KHz/2.5KHz/3KHz/3.5K/4K/5K/6K/7K/8K/
9K/10K/11K/12K/13K/14K/15K/16K/17K/18K/19K)
LOUD OFF/ON
BASS -7 ~ +7
TREBLE -7 ~ +7
BALAN L7-L0 0 R1-R7
FADER R7-R0 0 F1-F7
NO/YES
BASS
TREBLE
BAL
FADER
AUDIO RESET
F+R SET
HPF FREQ (OFF/30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/
90HZ/100HZ/120HZ/150HZ/180HZ/200HZ/250HZ/300HZ)
LPF FREQ (OFF/1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/
6.3KHZ/8KHZ/10KHZ/12.5KHZ/)
CLOCK
X/OVER
CLK FRMT 12H/24H
00:00CLK ADJ
MONO
DX
AREA
MODE SEL
OFF/ONSPECTRUM
C-MODE 1/C-MODE 2/C-MODE 3
ID3 TA6 OFF/ON
VERSION
COLOR SEL
1. Connect a portable audio player(commercially available).
Auxiliary input jack
Portable audio player
3.5mm stereo mini plug with
"L" shaped connector.
(commercially available).
2.Press[ ]buttons to select AUX IN.
3.Turn on the portable audio player and start playback.
VER 3.1
AUTO/RED/GREEN/BLUE/YELLOW/CYAN/PURPLE/WHITE.
(Display the mode setting to Select C-MODE 1,
The subitem will have one more color setting)
MONO/STEREO
DX/LOCAL
AREA EUR/USA/ASIA/RUSS
TUNER
DISPLAY
Menu Settings List
AUX INPUT
Adjustment
Main item Child item
MUNE
MODE

APP OPERATION
Please go to the APPLE APP Store or Google Play Store and search
[ AUDIO DSP Control ] APP, after downloading the APP, install it on your
Apple & Android devices.
TROUBLE SHOOTING
Not work
Not responding System problem Reset the unit
Can't turn on voice
Not playing
Radio reception
is poor
Poor contact of radio antenna
Poor signal at location
Reconnect the radio antenno
Change to other positions
Remote control
is invalid
Bluetooth call is
poor
Do not connect the speaker leads of the power cord to the car battery. otherwise,the
unit wil be seriously damaged.
Before oconnecting the speak leads of the power cord to the speakers, check the
speaker wiring in your car.
Reformat Replacement device
Replace supported audio files
Remote control battery is low
Microphone is too far away Speak into the microphone
Replace CR2025 battery
Incorrect device format
Device error
Unsupported audio file
Bluetooth is not connected
Phone does not support voice
Connect Bluetooth
N.A
Replace the fuse:sma10A(Red)Fuse blown
FAULT REASON
APP DOWNLOAD
APP Connection
SOLUTION
1. Open the [ AUDIO DSP Control ] APP, click [ ] to search for XQ-700DSP.
2. Click XQ-700DSP to connect, the [ ] will be red after the connect is successful.

Technical Specifications
Power supply Requirement
Maximum power output
Speaker impedance
Unit Dimensions(WxHxD)
Fuse 10A
4 - 8 Ohm
60W x 4CH
DC 12V
GENERAL
Version
BT Profile supports
Range of frequency 2.4 GHz spectrum
A2DP, AVRCP, HFP
Bluetooth 5.1
BLUETOOTH
Usable Audio Formats
USB Port Type
USB Maximum Capacity
USB Charging
Frequency Response
S/N Ratio
20 Hz - 20 KHz
60 dB
5V/2A
64GB
2.0
MP3, WMA, AAC, FLAC, APE
USB / TF CARD INDEX
FM Frequency Range
Preset 18FM
Europe Area: 87.5 ~108.0 KHz (50KHz / Step)
U.S.A. Area: 87.5 ~107.9 KHz (200 KHz / Step)
ASIA Area: 87.5 ~108.0 KHz (100 KHz / Step)
RUSS Area: 65.0 ~74.0 KHz (30 KHz / Step)
RADIO
178 x 82 x 50 mm