Jamie Oliver Home 2 User manual

OPERATING INSTRUCTIONS FOR THE
GAS BARBECUE GRILL
Description: Gas Barbecue Grill
Type of Gas: Butane, Propane, LPG
WARNING
FOR YOUR SAFETY
FOR OUTDOOR USE ONLY
(OUTSIDE ANY ENCLOSURE)
UK
12
11
17
14 15
13
13
14
15
16
17
18

Read this instruction carefully and ensure that your grill is properly installed, assembled, maintained and serviced in
accordance to these instructions. Failure to follow these instructions may result in serious bodily injury and/or property
damage. If you have any questions concerning the assembly or operation of this barbecue, please consult your dealer,
your gas supplier, the manufacturer or agent.
Notes to the user:
“USE OUTDOORS ONLY”.
“READ THE INSTRUCTIONS BEFORE USING THE APPLIANCE”.
“WARNING: ACCESSIBLE PARTS MAY BE VERY HOT. KEEP YOUNG CHILDREN AWAY.”
“DO NOT MOVE THE APPLIANCE DURING USE”.
“TURN OFF THE GAS SUPPLY AT THE GAS CYLINDER AFTER USE.”
TECHNICAL INFORMATION
MODEL NO.: HOME (2 burner)
DESCRIPTION: TWO BURNERS GAS BARBECUE GRILL
TOTAL HEAT INPUT:
(ALL GAS CATEGORIES)
7.2kW (515g/h)
GAS CATEGORY: □I3+(28-30/37) □I3B/P(30) □I3B/P(50) □I3B/P(37)
TYPES OF GAS: Butane Propane LPG GAS MIXTURES
GAS PRESSURE: 28-30 mbar 37 mbar 30 mbar 50mbar 37 mbar
INJECTOR SIZE main: 0.92 mm 0.92 mm 0.82 mm 0.88mm
USE OUTDOORS ONLY.
READ THE INSTRUCTIONS BEFORE USING THE APPLIANCE.
WARNING: ACCESSIBLE PARTS MAY BE VERY HOT. KEEP YOUNG CHILDREN AWAY.
THIS APPLIANCE MUST BE KEPT AWAY FROM FLAMMABLE MATERIALS DURING USE. DO NOT
MOVE THE APPLIANCE DURING USE.
TURN OFF THE GAS SUPPLY AT THE GAS CYLINDER AFTER USE.
DO NOT MODIFY THE APPLIANCE.
Country of Destination:
□I3+(28-30/37) BE, CH, CY, CZ, ES, FR, GB, GR, IE, IT, LT, LU, LV, PT, SK, SI.
□I3B/P(30) BE, CY, DK, EE, FI,FR, HU, IT, LT, NL, NO, SE, SI, SK, RO, HR, TR, BG, IS, LU, MT, CZ.
□I3B/P(50) AT, CH, DE, SK, CZ.
□I3B/P(37) PL
Produced by Guangdong Everteam Electric and Gas Industrial Co.,Ltd
No.11 Huatian Road, Huakou, Ronggui, Shunde Area, Foshan City, Guangdong, China
14

IMPORTANT:
Read the following instruction carefully and be sure your barbecue is properly installed, assembled and cared for. Failure
to follow these instructions may result in serious bodily injury and/or property damage.
If you have any questions concerning assembly or operation, consult your dealer or LPG Company.
Never fit the cylinder right to next the barbecue. Always place the cylinder at the left hand rear of the appliance. The
cylinder should be sited as far away from the appliance as possible without straining the hose.
Never light the grill with the lid closed.
The appliance and cylinder must be placed on level surface and must not be carried/ transferred whilst
alight.
NOTE FOR CONSUMER: Retain for future Reference.
USE AND CHARACTERISTICS
The barbecue grill is safe and easy to use. The specified gases for use are butane at 28 to 30 mbar, or propane at 37
mbar, or butane/propane mixtures at 30 mbar, or butane/propane mixtures at 37 mbar, or butane/propane mixtures at
50 mbar. Please ensure you only use your barbecue at the correct pressure the appliance is designed for.
The wheels have been fitted to this unit for easy manoeuvrability.
Food can be barbecued on the cooking grid either with or without the lid being closed. When the lid is closed for 5
minutes, the lid must be open for 1 minute to release heat.
With grease tray under the case.
Adequate ventilation is vital for combustion and efficiency performance of the barbecue. This will ensure the safety of
the user and other people in the vicinity of the area where the appliance is being used. Never use the appliance in any
enclosed covered area.
When the wind speed is above 2m/s, don’t use gas grill facing to the wind.
The appliance is designed for use outdoors only.
Turn off the appliance at the cylinder valve or regulator after use.
Any modification to the appliance may be dangerous and may cause injury or property damage.
Any unauthorised modification of the appliance will invalidate the guarantee on this appliance.
Never mount the cylinder under the barbecue on the base shelf as this could result in serious injury to the
user, other people and/or property.
The appliance must not have any overhead obstruction. E.g. trees, shrubs, lean to roofs. The appliance must be installed
with a clearance of 1 m around the appliance.
This appliance must be kept away from flammable materials during use. (Petroleum based products, thinners or any other
solid object that carries a flammable warning label.)
The use of this appliance in enclosed areas can be dangerous and is PROHIBITED.

INSTRUCTIONS FOR USE
Follow these instructions carefully to avoid seriously damaging your barbecue and causing injury to yourself and to
property.
1. Assemble the barbecue following the assembly instructions carefully.
2. Connect the gas hose to the barbecue. Connect the regulator to the hose.
3. Connect the regulator to the cylinder valve following the regulator instructions supplied with the regulator.
4. Turn all of the control knobs to the ‘OFF’ position before turning on the gas supply to the appliance.
5. Operate the regulator in accordance with the instructions supplied with the regulator.
LIGHTING YOUR BARBECUE Lighting Instructions: Main Burners
1. Open the lid before lighting.
2. Connect the gas cylinder to the barbecue following the instructions supplied with the regulator.
3. Turn all the control knobs to the ‘OFF’ position.
4. Turn ‘ON’ the gas supply at the cylinder or regulator switch following the regulator connection and operating
instructions. Check the cylinder to regulator connection and hose to barbecue hose inlet connection for leakage using
soapy water. Any leakage will show as bubbles in the area of the leak. If leak is found, do not use the barbecue.
Consult your gas or barbecue supplier for advice.
5. To light the left hand burner, push down and turn the left burner control knob anti-clockwise to the 90° position (full
rate position). An audible click will be heard, this should light the burner. Check that the burner is alight. If the burner
has not lit, repeat this process.
6. If the burner has not lit after two attempts, turn ‘OFF’ the gas tap and wait 5 minutes before retrying the ignition
sequence.
7. When the burner has lit, the burner rate can be adjusted by push down and turn the knob anti-clockwise to any
position between the full and low rate position.
8. Light the remaining burners from left to right in sequence.
9. To turn ‘OFF’ the barbecue, turn the cylinder valve handle or regulator switch to the ‘OFF’ position by following the
regulator instructions. Once the burners have extinguished turn all the control knobs to the ‘OFF’ position.
Warning: If any burner fails to ignite, turn the control knob off (clockwise) and also turn the cylinder valve off.
Wait five minutes before attempting to relight with ignition sequence.
Side burner lighting instructions (If applicable):
1. Once the grill burner has been lit, the side burner can be lit by following the instructions below.
2. Open the side burner lid before lighting the side burner and turn the side burner control knob to the ‘OFF’ position.
3. Push down the side burner control knob and keep pressing whilst turning anti-clockwise to the full rate position, an
audible click will be heard, this will light the burner. If the burner does not light, repeat this process.
4. If the burner has not lit after two attempts, turn off the gas tap, wait 5 minutes and then repeat step 3 in main burner
lighting instructions.
5. When the burner has lit, the burner rate can be adjusted by push down and turn the knob anti-clockwise to any
position between the full and low rate position.
6. To turn the barbecue ‘OFF’, turn the cylinder valve or regulator switch to the ‘OFF’ position and then turn all of the
control knobs on the appliance clockwise to the ‘OFF’ position when the flame have extinguished.
Warning: If the burner fails to ignite, turn the control knob off (clockwise) and also turn the cylinder valve off. Wait
five minutes before attempting to relight with ignition sequence.

MANUAL IGNITION
If necessary this barbecue can be lit manually.
Main Burners
1. Open the lid before lighting.
2. Light a 90mm barbecue match and hold adjacent to light hold at the left end of the barbecue.
3. Turn the left burner control knob to the full rate position. The burner will light from the match.
4. Once the left burner is lit, the burner next to it can be turned on and will light off the lit burner.
5. Light remain burners from left to right by the cross-lighting channel.
6. When the burner has lit, the burner rate can be adjusted by push down and turn the knob anti-clockwise to any
position between the full and low rate position.
Side burner (If applicable):
1. Open the lid before lighting.
2. If igniter fails to spark, use a match to light burner.
After use, close the gas supply by either turning ‘OFF’ the switch on the regulator or turning ‘OFF’ the cylinder valve.
In the event of light back whilst the appliance is in use. Turn all the controls, cylinder valve and regulator switch to the ‘OFF’
position. Wait 5 minutes before attempting to relight the appliance. If the problem persists after relighting, consult your gas
dealer, or the store where you purchased the barbecue, or a qualified gas engineer for assistance or repair. Never try to
rectify the problem yourself as this could result in serious injury and/or property damage.
The diameter of the pot should be around 180~220mm.
Clean the appliance of excess fat, before storage, with a damp cloth using a mild detergent solution as the cleaning agent.
Store the appliance in a clean dry environment.
Do not store your gas cylinder indoors. Store in a well ventilated area away from direct sunlight
CONNECTING THE GAS CYLINDER TO THE APPLIANCE
This appliance is only suitable for use with low-pressure butane or propane gas and fitted with the appropriate low-
pressure regulator via a flexible hose. The hose should be secured to the regulator and the appliance with hose clips/
nut. This barbecue is set to operate a 28 mbar regulator with butane gas or a 37mbar regulator with propane gas or a
regulator with butane/propane mixture at 37mbar or a regulator with butane/propane mixture at 50mbar or a regulator
with butane/propane mixture at 30mbar. Use a suitable regulator certified to BSEN 12864. Please consult your LPG
dealer for information regarding a suitable regulator for the gas cylinder.
BEFORE USE PLEASE CHECK FOR LEAKS
Never check for leaks with a naked flame, always use a soapy water solution
TO CHECK FOR LEAKS
Make 2-3 fluid ounces of leak detecting solution by mixing one part washing up liquid with 3 parts water.Ensure the
control valve is “OFF”.
Connect the regulator to the cylinder and ON/OFF valve to the burner, ensure the connections are secure then turn ON
the gas.
Brush the soapy solution on to the hose and all joints. If bubbles appear you have a leak, which must be rectified before
use.

Retest after fixing the fault. Turn OFF the gas at the cylinder after testing.
If detected leakage can not be rectified, do not attempt to cure leakage but consult your gas dealer.
REGULATOR AND HOSE
Use only regulators and hose approved for LPG at the above pressures (See Page 2). The life expectancy of the regulator
is estimated as 10 years. It is recommended that the regulator is changed within 10 years of the date of manufacture.
The use of the wrong regulator or hose is unsafe; always check that you have the correct items before operating the
barbecue.
The hose used must conform to the relevant standard for the country of use. The length of the hose must be 1.5 meters
(maximum). Worn or damaged hose must be replaced. Ensure that the hose is not obstructed, kinked, or in contact with
any part of the barbecue other than at its connection.
The hose should not be twisted or kinked when attached to the gas cylinder. No part of the hose should touch any part of
the appliance. So site the cylinder out to the left hand side of the appliance at the maximum distant permitted by the hose
length.
STORAGE OF THE APPLIANCE
Storage of an appliance indoors is only permissible if the cylinder is disconnected and removed from the appliance.
When the appliance is not to be used for a period of time it should be stored in its original packaging in a dry dust free
environment.
GAS CYLINDER
The maximum diameter and the maximum height of the cylinder is 310 mm and 500 mm as shown in (Fig.1).
Fig.1
Key
1: maximum diameter
2: maximum height
The gas cylinder should not be dropped or handled roughly! If the appliance is not in use, the cylinder must be discon-
nected. Replace the protective cap on the cylinder after disconnecting the cylinder from the appliance.
Cylinders must be stored outdoors in an upright position and out of the reach of children. The cylinder must never be stored
where temperatures can reach over 50°C. Do not store the cylinder near flames, pilot lights or other sources of ignition.
DO NOT SMOKE.
Pay attention when put the cylinder to the cylinder hole, ensure the hose connect to the cylinder not touch the hot surface-
-heat-resisted plate. Keep the cylinder stay in place during operation. Never put spare cylinder in the same cylinder
enclosure. Never block the way of shut off the cylinder valve. 
Warning: Shut off the gas cylinder when you smell gas.

CLEANING AND CARE
CAUTION: All cleaning and maintenance should be carried out when the barbecue is cool and with the fuel supply turned
OFF at the gas cylinder.
CLEANING
“Burning off” the barbecue after every use (for approx 15 minutes) will keep excessive food residue to a minimum.
OUTSIDE SURFACE
Use mild detergent or baking soda and hot water solution. Non-abrasive scouring powder can be used on stubborn
stains, then rinse with water.
If the inside surface of the barbecue lid has the appearance of pealing paint, baked on grease build up has turned to
carbon and is flaking off. Clean thoroughly with strong hot soapy water solution. Rinse with water and allow to completely
dry. NEVER USE OVEN CLEANER
INTERIOR OF BARBECUE BOTTOM
Remove residue using brush, scraper and/or cleaning pad then wash with a soapy water solution. Rinse with water and
allow dry it.
PLASTIC SURFACES
Wash with a soft cloth and hot soapy water solution. Rinse with water. Do not use abrasive cleaners, degreasers or a
concentrated barbecue cleaner on plastic parts.
COOKING GRID
Use a mild soapy water solution. Non-abrasive scouring powder can be used on stubborn stains then rinse with water.
GREASE TRAY
Please do not open the grease tray during use.
When clean the grease tray, pull out the grease tray first.
Please check the grease cup on time and take away the oil when 1/3 full.
CLEANING THE BURNER ASSEMBLY
Turn the gas OFF at the control knob and disconnect the cylinder.
Remove cooling grate.
Clean the burner with a soft brush or blow clean with compressed air and wipe with a cloth.
Clean any clogged ports with a pipe cleaner or stiff wire (such as an opened paper clip).
Inspect burner for any damage (cracks or holes). If damage is found, replace with a new burner. Reinstall the burner,
check to ensure that the Gas valve orifices are correctly positioned and secured inside the burner inlet (venturi).
In some cases your barbecue will light back because of an insect crawling inside the burner venturi or a spider spinning its
web inside the burner. This can be rectified by using a bottle brush inserted through the burner venturi and pushing it into
the burner over the burner length. If condition persists consult your gas dealer.
SERVICING
Your gas barbecue should be serviced annually by a competent registered person.

DE
12
11
17
14 15
13
13
14
15
16
17
18
BETRIEBSANLEITUNG
FÜR DEN GASGRILL
Beschreibung: Gasgrill
Gasart: Butan, Propan, LPG
WARNUNG
FÜR IHRE SICHERHEIT
NUR FÜR DIE VERWENDUNG IM FREIEN GEEIGNET
(AUSSERHALB VON GESCHLOSSENEN RÄUMEN)

Lesen Sie diese Anweisungen sorgfältig durch und stellen Sie sicher, dass Sie Ihren Grill richtig installieren, montieren,
warten und in Übereinstimmung mit diesen Anweisungen instand halten. Die Nichtbeachtung dieser Anweisungen kann
zu schweren Verletzungen und/oder Sachschäden führen. Wenn Sie Fragen zu Montage oder Betrieb des Grills haben,
wenden Sie sich bitte an Ihren Fachhändler, Ihren Gas-Lieferanten, den Hersteller oder Vertreter.
Hinweise für den Benutzer:}
„NUR FÜR DIE VERWENDUNG IM FREIEN GEEIGNET.“
„LESEN SIE DIE ANWEISUNGEN, BEVOR SIE DAS GERÄT BENUTZEN.“
„WARNUNG: ZUGÄNGLICHE TEILE DES GERÄTS KÖNNEN SEHR HEISS WERDEN. KLEINE KINDER AUF ABSTAND
HALTEN.“
„DAS GERÄT WÄHREND DES GEBRAUCHS NICHT BEWEGEN.“
„SCHALTEN SIE NACH GEBRAUCH DIE GASZUFUHR AM GASZYLINDER AUS.“
TECHNISCHE INFORMATIONEN
MODELL-NR.: HOME (2 Brenner)
BESCHREIBUNG: GASGRILL MIT 2 BRENNERN
GESAMT-WÄRMEZUFUHR:
(ALLE GASKATEGORIEN) 7.2kW (515 g/h)
GASKATEGORIE: □I3+(28-30/37) □I3B/P(30) □I3B/P(50) □I3B/P(37)
GASART: Butan Propan LPG-GASMISCHUNGEN
GASDRUCK: 28-30 mbar 37 mbar 30 mbar 50 mbar 37 mbar
GRÖSSE
EINSPRITZDÜSE
Hauptbrenner: 0,92 mm 0,92 mm 0,82 mm 0,88mm
NUR FÜR DIE VERWENDUNG IM FREIEN.
LESEN SIE DIE ANWEISUNGEN, BEVOR SIE DAS GERÄT BENUTZEN.
WARNUNG: ZUGÄNGLICHE TEILE DES GERÄTS KÖNNEN SEHR HEISS WERDEN. KLEINE KINDER AUF
ABSTAND HALTEN.
DIESES GERÄT MUSS WÄHREND DER BENUTZUNG VON BRENNBAREN MATERIALIEN FERNGEHALTEN
WERDEN. DAS GERÄT WÄHREND DER BENUTZUNG NICHT BEWEGEN.
SCHALTEN SIE NACH GEBRAUCH DIE GASZUFUHR AM GASZYLINDER AUS.
NEHMEN SIE KEINE ÄNDERUNGEN AM GERÄT VOR.
Bestimmungsland
□I3+(28-30/37)BE, CH, CY, CZ, ES, FR, GB, GR, IE, IT, LT, LU, LV, PT, SK, SI.
□I3B/P(30) BE, CY, DK, EE, FI,FR, HU, IT, LT, NL, NO, SE, SI, SK, RO, HR, TR, BG, IS, LU, MT, CZ.
□I3B/P(50)AT, CH, DE, SK, CZ.
□I3B/P(37)PL
Hergestellt von Guangdong Everteam Electric and Gas Industrial Co.,Ltd
No.11 Huatian Road, Huakou, Ronggui, Shunde Area, Foshan City, Guangdong, China
14