Jandy JY-BT232 User manual

JY-BT232

Stereo Bluetooth Headphone
Instruction Manual
SAFETY PRECAUTIONS
1. Please read, follow and keep these instructions
2. Heed all warnings on the product and in the operation instructions
3. Stop using this product immediately if it causes discomfort or pain. When using this
product, it is recommended that you limit volume to help avoid harm to your ears and
danger resulting from eing una le to hear what is going on around you.
4. Keep the device out of extreme heat and humidity.
5. Do not use the device near water, such as sinks, athtu s, swimming pools, washing
machines, tu s of water, etc.
6. O serve all signs and instructions that require an electrical device or radio product to
e switched off in designated areas, such as petrol/refuelling stations, hospitals,
lasting areas, potentially explosive atmospheres or aircraft.
7. Using a headphone while driving can distract you and increase the likelihood of an
accident. If driving conditions demand it (such as ad weather, high traffic density,
presence of children in the car, difficult road conditions), pull off the road and park
efore making or answering calls.
8. Power time may differ depending on personal ha its.
9. Please do not rotate the headset when the head and has een set / pushed to the
lowest position.
10. This appliance should e used in moderate climates.
11. To reduce the risk of fire or electric shock, do not expose this apparatus to rain
or moisture. The apparatus shall not be exposed to dripping or splashing and
that objects filled with liquids, such as vases, shall not be placed on apparatus.
12. The battery (battery or batteries or battery pack) shall not be exposed to
excessive heat such as sunshine, fire or the like.
13. Only use attachments/accessories specified or provided by the manufacturer.
WARNINGS!
14. To prevent possi le hearing damage, do not listen at high volume levels for long
periods.
15. Do not turn up the volume too high, doctors warn against
prolonged exposure to high volume.
16. Stop using the product or lower the volume if you feel your ears
ringing.
17. Prolonged listening at high volume could lead to hearing damage.
*
Bluetooth wireless technology
Bluetooth wireless technology allows you to connect compati le devices without ca les. A
Bluetooth connection does not require that the phone and the headset e in line of sight,
the distance etween the devices is up to 10 meters (30 feet). The closer the phone and the
headset are to each other, the etter is the performance. The connection is su ject to
interference from distance and o structions or other electronic devices. The headset is

compliant with Bluetooth Specification 2.1+ EDR. Check with the manufacturers of other
devices to determine their compati ility with this device.
There may e restrictions on using Bluetooth technology in some countries/locations. Check
with your local authorities or service provider.
PACKAGE CONTENTS
– Bluetooth Stereo Headphone
– USB charging cable
– Instruction manual
– 3.5mm audio cable
Features：
：：
：
Bluetooth 2.1 + EDR
Calling function
OVERVIEW OF THE HEADPHONE
10.------
9.-------
1. Volume up (Next track)
2. Multi-function button (pairing, play/pause, answer/end calls)
3. Volume down (Last track)
4. Power on/off switch,
5. Blue LED (power and pairing status indication)
6. AUX IN
7. Red LED (battery charging and low-voltage indication)
8. USB Charging port
9. 3.5mm Audio cable
Microphone

10.USB charging cable
Charging the Wireless Headphone
– To charge the headphone, plug the included USB charging cable into your
headset and computer (or an optional USB charger). When the headset
battery is very low, the red LED will continually flash and a full charge can take
up to three hours with solid red LED light. The red LED will turn off when
charging has been finished.
CHARGING LI-POLYMER BATTERY SAFELY
The headphone has a non-remova le lithium-polymer attery.
Do not try to remove the attery. Do not dispose of the headphone in a fire, the attery
may explode.
Dispose of the headphone in accordance with the applica le laws and regulations in your
area for the disposal of lithium-polymer atteries.
Non-compliance with the conditions of use of the lithium-polymer attery may cause a
fire, explosion or chemical urn.
Do not allow attery leakage to come into contact with eyes or skin. In case of contact,
flush eyes or skin with plenty of water and seek medical advice.
Do not expose the lithium-polymer attery to a temperature higher than 60 °C.
Do not disassemble, crush, short-circuit or incinerate your battery as it may
cause fire, injury, burns, or other hazards.
Before your first time use, please recharge your headphone.
Do not overcharge your player, or it may shorten the battery’s life.
The times of charge/discharge are no less than 300 cycles.
The li-polymer battery is consumptive material, so recharge it periodically is
needed even if the player is not be used.

Connecting the Wired Headphone
– Turn OFF the power on/off switch.
– Connect 3.5mm audio cable to AUX IN
– Connect the 3.5mm audio cable to any 3.5mm audio jack of audio device.
Connecting the Wireless Headphone
– Turn ON the power on/off switch.
– Power on the Bluetooth device (e.g. MP3, mobile phone, smart phone or tablet
to be paired with the headphone).Turn on Bluetooth feature on your device
and set to search the Bluetooth headphone. See the instruction of your
Bluetooth device.
– Press and hold the multi-function button for six seconds (It could be seven
seconds if the headphone has never been paired with Bluetooth devices
before) to turn the headphone on; the headphone would automatically enter
pairing mode then the Red and Blue LED blinks rapidly
– (The headphone could search the last paired Bluetooth device for 3 minutes
and it would shut down automatically if without pairing)
– In the Bluetooth device menu, select “CHBT08” from the list.
– When the headphone status light turns solid blue, a Bluetooth connection is
made
– Power Off your headphone by pressing the Multi-function button for four
seconds with the red LED shortly flashing and then going off.
Using the headphone
Listen to music or make a call.
Play/ Pause.
1. Select an audio track or video clip.
2. Tap (press less than one second) the Multi-function button to play / pause the
audio track or video clip.
3. Short press the volume up / down button to have “next / last track” function
4. Long press (less than one second) the volume up / down button to adjust
volume to your favourite
Answer an incoming call
– Connect the headphone to a smart phone. Short press (less than one second)
the Multi-function button to answer an incoming call.
End a call.

– Short press (less than one second) the Multi-function button to end the call
Redial last call
– press the multifunction button two times. This function only in the use of
hands-free set when available, for more information, please refer to the mobile
phone user manual.
Reject an incoming call.
– Press the Multi-function button for three seconds (two times).
Adjust the volume during a call
– long press the volume increase / decrease button.
LED indications
Flashing Blue Bluetooth: A connection is made; your headphone is
ready to use.
Flashing Red Bluetooth: A rapid blink indicates pairing is achieved; a
slower blink indicates the headphone is connectable, but
not yet connected.
Slow Flashing Red The battery is in low power
Short Flashing Red When you turn off the headphone successfully, the red
LED will short flash and go off
Solid Red Charging, and the red LED will turn off if charging
finished.
Red and Blue
Fiashing
alternatively
Ready for pairing.
No light Your headphone is powered off.
·
··
·TECHNICAL SPECIFICATION
Headset
– Driver Unit: 40 mm
– Sensitivity: 100dB S.P.L at 1KHz
– Impedance: 32Ω
– Maximum input Power: 100 mW
– RF receive sensitivity: -80dBm
– Signal-to-noise ratio: ≥70dB
– Frequency response: 20Hz - 20kHz
– Bluetooth working range : ≤10m
Microphone
– Ф4mm Omni-directional microphone
Battery
– Li-polymer battery: 300mAh

– Battery life: ≥12 hrs (continuously operating)
– ≥170 hours of standby time
– Charging time: ≤2 hrs
TROUBLE SHOOTING
See below for solutions to common problems.
Symptom
Solution
LEDs are not light
Use the provided USB charging ca le to charge the
attery y referring to the “charging the wireless
headphone” in this guide
Check if the headphone is receiving power from your
computer’s USB port; if not, try another USB port on
your computer. Then turn on your computer to charge
the headphones
Try re-pressing the multi-function utton
Bluetooth not connecting?
Try powering off the headphone, and then power it ack
on y pressing the Multi-function utton.
If failed to pair within 3 minutes, re-esta lish pairing
etween the headphone and your Bluetooth device y
referring to “connecting the wireless headphone” in this
guide
Try using the headphone with a different Bluetooth
device
Make sure the Bluetooth feature is activated of your
device.
Distorted sound? No sound at
all? Microphone not working?
Trying moving the headphone closer to your Bluetooth
device. The wireless status light on the headphone turns
solid lue when the headphone is in range (up to 10m)
with Bluetooth device
Make sure the headphone is selected as the active
output audio device on your Bluetooth device
Adjust the volume settings to an audi le level on oth
your headphone and Bluetooth devices
Check if the red LED is flashing (the attery is in low
voltage). Then charge the attery immediately.
TRADEMARKS
CARREFOUR is a registered trademark of Carrefour group. All other company names are
trademarks, registered trademarks or service marks of their respective owners.

Declaration of Conformity
Here y, Carrefour declares that this Bluetooth device is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
The declaration of conformity may e consulted at: CMI - 2 Avenue du Pacifique - Les Ulis -
91940 COURTABOEUF Cedex FRANCE
Net weight: 160 g
Recycling
This product ears the selective sorting sym ol for Waste electrical and electronic
equipment (WEEE). This means that this product must e handled pursuant to European
directive 2002/96/EC in order to e recycled or dismantled to minimize its impact on the
environment.
User has the choice to give his product to a competent recycling organization or to the
retailer when he uys a new electrical or electronic equipment.
For further information, please contact your local or regional authorities.
For FCC
Caution: The user is cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.