Janome 1110DX - User manual

So Advanced, So Quick, So Easy To Thread
3-4 Thread or 2-Thread Serging
3-Thread Rolled Hem
2-Thread Picot Hem
Hem On Flared Fabric
Decorative Overedge Wide
Decorative Flatlock
Decorative Overedge Narrow
Gathering
Lettuce Edge
4-Thread Seam
Narrow Overedge Seam
Wide Overedge Seam

The Threading Chart and Color-Coded Guides are easy to follow
for 2-thread or 3-4 thread serging.
Threading the Lower Looper is a breeze
when you have easy access. Just rotate
the thread guide and the lower looper
thread guides pop into view.
The 1110DX has a Differential
Feed device with two feed dogs,
virtually eliminating puckered
edges on woven fabrics and
stretched edges on knits.
One feed dog moves the exact
amount of fabric needed for
the stitch length while the other
pushes or pulls the fabric
according to the ratio on the
eed dial. This ratio can be set
anywhere from 0.5 to 2.25.
Easily Retractable Upper Knife.
Solid metal base plate keeps
machine stable, quiet and
smooth running.
Easy To Reach Lower Looper Guides Quick Change Rolled Hem
Easy-To-Follow Upper Thread Guides Dual Feed Dogs And Differential Feed
Ensure Optimum Precision
Differential Feed 1.0-2.25
Differential Feed 0.5-1.0
No need to change the needle plate
for rolled hemming. Just slide the
needle plate to “R” position and
choose “R.H.”on the lower looper
pre-tension setting slider.
SPECIFICATIONS
SEAM TYPE: 2 and 3/4 THREAD OVERLOCK
NEEDLE: REGULAR TYPE (15x15P)
SEAM LENGTH: 1-5mm
SEAM WIDTH: 3.5mm (regular); 5.7mm (wide);
2.00mm (narrow)
DIFFERENTIAL FEED RATIO: 0.5-2.25
NEEDLE GUARD: FRONT & BACK
CUTTING WIDTH: ADJUSTABLE
UPPER KNIFE: RETRACTABLE
TENSION DIALS: NUMBERED (ONE ROTATION)
THREAD GUIDES: COLOR-CODED
PRESSER FOOT: SNAP-ON TYPE
SPEED CONTROL: ELECTRONIC
STD.
R.H.
Adjustable Cutting Width.
©2006 Janome America, Inc.