JAR Systems ELEVATE MAX MC-6 Series User manual

USB-C Charging Cart
Designed in the USA
Made in China
MC-6XXX User Guide
Version A
#M00017
Last Modified 12/20/2022
For a copy of the most up-to-date manual, please contact a
JAR Systems representative or visit:
JAR-Systems.com/Support

1 For Additional Support Call: 866.393.4202 or Email: [email protected]
· To remove devices from the carts with the greatest
level of charge first, disconnect devices with the
green LEDs first before you disconnect devices with
the blue LEDs.
· Devices that do not feature a USB-C charging port
can be charged using USB-C emulator cables.
(Not Included, contact JAR Systems for more info)
Quick Start Normal Operation
White: Port Ready
Blue: Device Charging
Green: Charge Level >90%
1. Connect cart to power source
2. Plug in powered down devices
3. Connected devices will automatically charge as
efficiently as possible
4. Connect/disconnect devices any time
· Plug the power cable into a standard 15A outlet. Be
sure that the power switch on the side of the cart is in
the ON position. LEDs will illuminate white to indicate
the cart is connected to a power source.
· Power off devices fully before connecting them to
the cart for charging.
· Connect the devices to the USB-C charging cables.
Ensure that devices are placed in the cart so that the
charging ports are as close as possible to the USB-C
charging port on the cart. Incorrectly connecting
devices can strain the cable over long periods of
time and lead to damage.
· You may hear a clicking sound, and the LED lights
will change color according to the power draw of the
attached devices.
· The system will automatically limit power consumption
by turning some of the USB-C ports off temporarily.
Refer to the device for the level of charge. Connected
devices will charge as fast and evenly as possible, up
to 65W, without drawing too much power.
 
LED Charging Port Indicator Lights USB-C Emulator Cables

2 For Additional Support Call: 866.393.4202 or Email: [email protected]
Elevate carts feature adjustable device bays with multiple configuration options. Use the guides below to determine which hole pattern to use.
To remove dividers, push in and upward on the front of the divider and guide it out of the slot in the tray. To install the dividers, simply place the tall side of the
divider into the rear slot first, then push in and downward to get the other side into the front slot.
36 DEVICE PATTERN
Best for devices up to 1” wide.
30 DEVICE PATTERN
Best for devices up to 1.25” wide.
24 DEVICE PATTERN
Best for devices up to 1.5” wide.
Adjusting Device Bay Dividers
Trouble-Shooting
Always start troubleshooting with a simple reboot
Unplug and replug the power cord. When the cart
is connected to power, the LEDs will change color
based on the power draw of connected devices (see
light indication).
Single Port or Device Issue
Ensure that both of the USB-C cable ends plug into
the cart and the device correctly.
If there is still no charge, disconnect the device from
that port (A) and plug into another port (B). If it is still
not charging, it may be an issue with the device.
If charging begins when using port (B), exchange the
cable from port (B) to port (A). If it begins to charge,
the cable (A) is defective and will need to be replaced.
Entire Charging Hub/Shelf Issue
Check the side of the charging hub on the left side
of the cart to see if the cart’s power cable is plugged
in and connected correctly.
When the cart is powered back on, the LED lights will
begin to illuminate.
Remove/Replace USB-C Cables
Each shelf may be secured with up to three screws.
Remove all screws with the supplied Torx key.
Open the tray lid. Unplug the cables from the USB-C
ports and route them through the cable track.
Reverse the process to replace a cable.
Cable Lock Security Screws

Warnings
· Power down all devices prior to connecting them to the hub for charging.
· Keep away from moisture and harsh chemicals. Do not place any liquids near the
charging cart.
· Any electrical equipment must be used by an adult or with adult supervision.
· Do not connect unsupported items to the charging cart or use for any purpose
other than its intended use.
· Do not attempt to obstruct any ventilation openings or dismantle, open, or modify
the system in any way.
· Do not sit or stand on the cart or charging hubs.
· Do not use an extension cable or daisy-chain to any other devices.
· Not intended for operation at altitudes greater than 2000 m or 6561 ft above sea
level and should not be operated in extreme temperatures. For indoor use only.
Disclaimer
Failure to read, thoroughly understand, and follow all instructions can result in serious
personal injury, damage to equipment, or voiding of factory warranty. Since the use
of this information, the equipment connected, and the conditions by which any JAR
Systems product is used is beyond the control of JAR Systems, it is the obligation of
the owner and/or user to determine the correct and safe use of any equipment and
product. To the extent that the law permits, any liability which may be incurred as a
result of the use or future use of a product manufactured or sold by JAR Systems is
limited to the cost of repairing or replacing the failed product or component at the
discretion of JAR Systems either within, or outside of warranty periods, and does not
extend to any loss or damage which may be caused as a consequence of misuse or
failure of the equipment, product or the information contained herein. JAR Systems
shall not in any event be liable for economic loss of profits, indirect, special, bodily
injuries or consequential damages. Specifications and images are for illustration
purposes only. Final product may differ and is subject to change without notice.
Warranty
This product comes with a warranty that covers any defects in material or workmanship
and extends to the original consumer of the product only. JAR Systems, LLC will replace
the product with a new or refurbished product, repair the product, send replacement
parts, or refund the purchase price of the product, at JAR Systems, LLC’s discretion.
This warranty does not cover accidental damage, unreasonable use, neglect, tampering
or other causes not arising from defects in material or workmanship.
Any implied warranties last only as long as the warranty periods listed above except
where state law does not allow limitations on how long an implied warranty lasts. This
includes but is not limited to the implied warranties or merchantability and fitness.
JAR Systems, LLC’s responsibility is limited to the actions listed above and nothing else.
This warranty does not cover, and JAR Systems, LLC will not be responsible for, any
damages due to loss of use of the product, or any other costs or expenses incurred by
you or anyone else who uses the product, whether due to defects, breach of contract,
negligence, strict liability or otherwise. JAR Systems is not liable for any indirect,
special, incidental or consequential damages related to the product or this warranty.
Some states do not allow exclusions or limitations on consequential or incidental
damages, so these limitations or exclusions may not apply.
This warranty gives you specific legal rights and you may also have other rights that
vary from state to state. This warranty is governed by the laws of Florida, excluding
its conflict of laws principles, unless your state requires that its law be used.
Contact JAR Systems for information on the length of warranty on your product(s).
Explore more options for USB-C Charging!
Learn about ways to charge devices in growing technology landscapes. Contact a
JAR Systems representative at 866.393.4202 or visit:
JAR-Systems.com/Products