(1)
•Press to navigate between tracks when Bluetooth
device is connected.
•Press and hold to adjust volume. While in Bluetooth
mode, a beeping sound will alert you when you have
reached maximum volume.
(2) LED Indicator Lights
(3) Play / Pause (in Bluetooth Mode)
•Answer a call – Press once to answer
PAIRING YOUR
BLUETOOTH SPEAKER
In order to use your Jarv X97 Bluetooth Speaker with a
Bluetooth-enabled device, you will first need to pair the two.
1. Place the Bluetooth Speaker and the Bluetooth enabled
device where they are easily viewable and no more than 3ft.
apart.
2. Turn ON your Bluetooth pairing function on your device
3. Turn the Power button which is located on your Jarv X97
speaker to the ON position. A chime will be heard confirming
that the speaker is powered on.
•Redial a call - Press twice to redial
•Reject a call - press/hold for 3 seconds and release
•Bluetooth pairing - Press and hold to initiate, then
continue to use normally for playing and pausing.
(4) TF card
Support up to 32G memory card
Support MP3/WAV/WMV
(5) Power Button
Switch to turn speaker on / off.
When powering on, you will hear a beep-like sound and
the LED light will turn blue.
(6) Micro USB Charging Port
Use this port to charge your speaker using the provided
USB charging cable.
(7) AUX Input
Use this input to connect your speaker to your media
device via AUX cable.
(8) MIC
For best results, keep within 3 feet of the mic while
speaking.
4. The speaker will appear as “Jarv X97” when scanning for
available Bluetooth devices within range.
5. When selecting “Jarv X97” from the list, if prompted for a
Password (sometimes called a “Passkey”, “PIN Number”),
enter “0000”
6. A second chime will be heard once the Bluetooth enabled
device has successfully been paired to the speaker
7. Incoming calls will override music and other media with a
voice alert, press button to answer or press and hold to
reject/ end the call.
