Jasanwit Jw-mr-hd1231-gw045-a05 User manual

12CH Full 960H HDD Mobile DVR

User Manual

Before installing and using, be sure to read the Manual, then you will properly use and protect your machine.

The first part of the statement concerns the matters to be attention before installing and using.

Attention

To protect your rights, before using and installing, please carefully read the contents of the manual.

This product is used for car inside, in order to prevent short-circuit or the risk of electric shock, do

not make the machine in the rain or humidity environment.

Event of any solid or liquid into the machine, please disconnect the power of the machine

immediately, and ask the qualified technical staff to check, then restart it.

The product is high-tech equipment; machines can not be repaired by users even very small

original part. Once failure occurs, please ask for the qualified technical personnel, or contact with

the dealer. Do not repair it by users themselves.

Installation Environment

8-36V DC power supply, please confirm the local power supply before power on.

If the machine were not used for a long time, please completely disconnect the video’s power

supply.

Please select the appropriate location for the installation of the machine, where the air can flow

freely around the machine to avoid overheating or water inflow.

Machine can not be installed near the radiators, or near the ventilation road which is near heat, or

directly under sunshine, or too much dust, or rain water, or near the area where the mechanical

vibration or impact happens.

Package List

Name

Quantity

HDD Mobile DVR

User Manual

Certificate of approval

Remote Control (not include battery)

Connecting Cable

Key

Note: When the specification or parameters changes, no other announcement in addition.

Contents

1 Product Overview....................................................................................................................................................... 3

2 Basic functions............................................................................................................................................................ 3

2.1 Audio/Video Compression Format................................................................................................................... 3

2.2 Audio/video recording mode............................................................................................................................ 3

2.3 Image quality when monitoring, recording, playback...................................................................................... 3

2.4 Total Resources................................................................................................................................................. 4

2.5 Audio video synchronous recording................................................................................................................. 4

2.6 Access detection................................................................................................................................................5

2.7 Signal loss alarming function............................................................................................................................5

2.8 Alarm linkage....................................................................................................................................................5

2.9 Alarm pre-recording..........................................................................................................................................5

2.10 Full duplex.........................................................................................................................................................5

2.11 Malfunction alarming function......................................................................................................................... 5

2.12 Self-test the status and self-recovery................................................................................................................ 5

2.13 Front-end device control and multi-channel monitor and switch.....................................................................6

2.14 Networking........................................................................................................................................................6

2.15 Data backup.......................................................................................................................................................6

2.16 Authority, encryption, data safety..................................................................................................................... 6

2.17 Log function...................................................................................................................................................... 6

3 Features....................................................................................................................................................................... 7

3.1 Operating system.....................................................................................................................................................7

3.2 Compression format................................................................................................................................................ 7

3.3 Monitoring and Recording...................................................................................................................................... 7

3.4 Index and Playback................................................................................................................................................. 8

3.5 HDD storage and data backup.................................................................................................................................8

3.6 Control.....................................................................................................................................................................8

3.7 Others...................................................................................................................................................................... 8

4 Technical Parameters................................................................................................................................................ 9

5 Instruction of Installation..........................................................................................................................................11

5.1 Instruction of External Interface Wiring......................................................................................................... 11

5.2 Instruction of HDD Installation...................................................................................................................... 13

6 Instruction of Using.....................................................................................................................................................16

6.1 Instruction of Front Panel................................................................................................................................16

6.2 Instruction of Remote Control Operation....................................................................................................... 17

6.3 Menu Setting Instruction:................................................................................................................................19

6.4 DVR Video Playback Instruction................................................................................................................... 31

6.5 Video Backup..................................................................................................................................................33

6.6 PTZ control......................................................................................................................................................33

6.7 Video Data Volume.........................................................................................................................................34

6.8 Extranet Port Mapping.................................................................................................................................... 35

6.9 Domain binding setting................................................................................................................................... 39

1 Product Overview

The four-channel /eight –channel /twelve–channel embedded digital hard disk video recorder is designed

for car safety. It uses embedded processor and embedded operating system, combined with video / audio

compression / decompression, GPS, car recorder, and the capacity hard disk storage technology to confirm the

high intelligence and high stability. Widely used for bus, ship, train, and other areas of security.

2 Basic functions

2.1 Audio/Video Compression Format

The video adopts latest IS014496-10 (H.264) video compression technology, high compression rate to

ensure a better image quality under less storage; the audio adopts ADPCM compression method, output a

better voice with low distortion.

2.2 Audio/video recording mode

Compression format

The audio video data are stored through special files, encrypted to prevent data loss under frequent

power failure circumstances.

Compression stream

Image quality with 8 levels and adjustable

12 Channel 960H：(192Kbps-2.0Mbps/channel)

to meet different requirements.

Storage

2.5 inch SATA hard disk，2TB maximum.

2.3 Image quality when monitoring, recording, playback

Resolution Monitoring:

12 Channel 960H：960*576/CH; Recording: 960*576/CH;

Frequencies

The monitoring, recording and playback are all with 25fps or 30fps

Horizontal resolution for monitoring

12 Channel 960H：960*576 /channel

Horizontal resolution for playback

12 Channel 960H：960*576 /channel

2.4 Total Resources

12 Channel 960H：

Support 12 channels 960H (960*576) simultaneous recording, total 360fps.

Support 12 channels 960H (960*576) simultaneous playback, total 360fps.

2.5 Audio video synchronous recording

Record and playback the audio/video/GPS positioning data simultaneously. The information can be

checked by CMS software which can be installed on computer.

2.6 Access detection

When after open motion detecting video recording equipment in camera detects movement, the

monitoring area can start recording, trigger the alarm, warning area size, location, number, area

and alert in sensitivity or removal of alert, and other functions, can be set up.

2.7 Signal loss alarming function

When the video signal gets lost, the device will send alarm signal via internet. Responding in less

than 5 seconds with log information. NOTE this function will not work when a channel is not in

recording status or if a channel is displaying in full screen.

2.8 Alarm linkage

Support 4CH alarm input (8-36v high level voltage to trigger); 1CH alarm out (by relay, max. 500mA,

switch ON);When the alarm is triggered, the audio recording will be started automatically (30-330s,

adjustable).Alarm out will close for (5s-330s, adjustable) and send alarming signal, responding in

less than 1s.

2.9 Alarm pre-recording

Alarm video mode, alarm pre - recorded more than 5 s video, audio, positioning data.

2.10 Full duplex

Under full loading status, users can index, playback the recorded data with no frame loss.

2.11 Malfunction alarming function

When the DVR fail to work, the alarm switch is ON, showing alarm information for 5 minutes at

least.

2.12 Self-test the status and self-recovery

When in working status, the “RUN” indicator will constantly flashes and check the device. Recovery

will take no more than 3 minutes when device crashes.

2.13 Front-end device control and multi-channel monitor and switch

The DVR can control PTZ cameras through default protocols (RS-485, PELCO-D, 9600 baud rate),

12 Channel 960H：12 channels real time, switchable to monitoring mode.

2.14 Networking

Combining the CMS software. With built-in 3G module, the car can be monitored remotely.

2.15 Data backup

To backup the HDD data into computer via HDD card reader;

Downloading the HDD data remotely through network.

Transfer the HDD data to computer, download and play the media via our unique DVR player

software. Users can also switch the HDD files into universal AVI format to make it workable in other

players.

2.16 Authority, encryption, data safety

Enter the DVR by password, default for “6666”. Data is stored in a special file system to ensure it’s

encrypted and safe..

2.17 Log function

The log includes the alarming and malfunction information, stored into HDD. It can be checked via

computer.

3 Features

3.1 Operating system

Embedded Linux operating system, high stable, free from virus.

English/ Chinese/ Russian/ Portuguese menu switchable.

Graphical user interface

3.2 Compression format

H.264 format: more excellent frame rate, quality image output

3.3 Monitoring and Recording

Monitor:

12Channel 960H：12CH 960H (960*576 )

Record:

12 Channel 960H：PAL 300fps, NTSC 360fps, full real-time 12CH 960H (960*576 ) recording.

Record mode: by alarm, schedule, manual, motion detection.

Support 12 Channel 960H：12CH video and 12CH audio meanwhile recording.

Record image quality: 8 levels adjustable

Video recorded in special file system to ensure lifespan and safety of HDD

Reliable evidence with unchangeable audio/video data.

3.4 Index and Playback

Index and playback by time.

Support

12Channel 960H：12CH video, 1CH audio (any channel can be chosen) ,

index and playback at the same time, support amplifying in one channel.

Data only played by DVR playback software

3.5 HDD storage and data backup

Support 2.5 HDD max 2TB.

The HDD data can be backed up via PC software.

Support USB backup.

3.6 Control

Dual MCU control, to ensure DVR stability.

Support remotely control by remote controller

3.7 Others

Upgrade through USB , easy to maintain.

Protect by password, to avoid data damage.

Delayed shutdown: default for 5s, adjustable

Anti-pulse and low voltage protection

Real-time timer

Anti-shock for the PCB panel and parts.

Watch dog function to avoid system crush.

4 Technical Parameters

Items

Device parameters

Performance index

Name

Product Name

12 Channel Mobile DVR(HDD Storage)

System

Operation System

Linux

Operation Interface

Graphical Interfaces, Chinese/English optional

File System

Proprietary Format

System Privileges

User Password

Video

Video Input

12ch Independent Input: 1.0Vp-p，75Ω.Both B&W and Color Cameras

Video Output

1 Channel PAL/NTSC Output, 1.0Vp-p，75Ω，Composite Video Signal

Video Display

1 Or 12Screen Display

Video Standard

PAL:25frames/Sec;NTSC:30frames/Sec

System Resources

PAL:300 Frames; NTSC:360 Frames

Audio

Audio Input

12 Channels Independent Input 600Ω

Audio Output

1 Channel(12 Channels Can Be Convert Freely)

Basic Output Level

1.0—2.2V

Distortion Plus Noise

≤-30dB

Recording Mode

Sound And Image Synchronization

Audio Compression

ADPCM

Digital

Processing

& Storage

Image Compression

H.264 Fixed Code Stream

Image Format

12*960H（960*576），12*D1（704*576）

Video Stream

1.0M-6.0Mbit/s

Video Taking Up Of Hard Disk

450M-2.6GByte/hour

Playback Resolution

1or12*960H，1or12*D1

Audio Bitrate

4KByte / s / channel

Audio Taking Up Of Hard Disk

14MByte / hour / channel

HDD Storage

Support Max 2TB

Image Quality

Eight Grades to Choose

Alarm

Alarm in

8 Channels Independent Input. High Voltage Trigger

Alarm out

2 Channels Independent output

Move Detect

available

USB

Interface

Host Access

Can Expand One For USB Disk Backup

Network

Interface

Wire line Access

Can Expand One RJ45 Ethernet Port

Wifi

Can Expand One Wifi Module Inside

Can Expand One WCDMA or CDMA2000 Module Inside

GPS

Interface

GPS

Can Expand GPS Module Inside

Extend

Interface

RS232

Extensible,it is convenient to connect with other vehicle equipment

RS485

Extensible,it is convenient to connect with other vehicle equipment and PTZ

Camera

Intercom

Can Expand Intercom Module Inside

G-Sensor

Can Expand G-Sensor Module Inside

Canbus

Can Expand Canbus Module Inside

Others

Power Consumption

DC8-36V 5% ≤12W

Working Temperature

-20℃~ +85℃≤80%

Clock

Built-In Clock, Calendar

Packaging

Product Size

245(L)*190(W)*71(H)mm（with Holder）

Product Weight

3.4KG(without HDD)

Package

Each In a Box, 5 set/Canton

Box Size

245(L)*190(W)* 71(H)mm

Carton Size

650(L)*375(W)* 255(H)mm

Carton Weight

14kgs/ 18kgs (without HDD)

5 Instruction of Installation

5.1 Instruction of External Interface Wiring

Remarks:

If the power supply is 12V, then the current of 12V output can be just 1A. So if there are more than

3pcs cameras, we suggest customers to get power for other cameras from the 12V vehicle power

directly or use Our special car power supply.

RS485 、RS232 、LINK、CANBUS interface are optional interface, available only when you listed

in the order for this interface.

Ports:

DEBUG: testing port

EXTEND: intercom connecting port

SENSOR: alarm port

5.2 Instruction of HDD Installation

1 2

3 4

5 6

7 8

9 10

11 12

Make sure whether power switch is turned on or turned off, if it is turned on, please use the key, turn the

indentation on the “turn off” position.

Pull the front panel of the hard drive box. Carry out the hard drive and drop it on the table.

Set down the two screws of the hard drive by cross-screwdriver.

Drop the under backer of hard drive box, and then check the line whether it is on top of the under

backer or not.

Bring here the SATA hard drive which needs installation; connect the line joint of hard drive box to

the hard drive. Please note the heading of the line while connecting. Make sure all of the

connecting is complete done.

Put the hard drive in the hard drive box. The obligate line of hard drive needs longer, the line of

hard drive needs to lie on the right position.

Let the four white screws of the machine through the center hole of the four shockproof rubber

pads. Fix hard drive on the four holes of hard drive box, do not make the screws too taut, leave a

little space for hard drive to move. So it can reach a perfect effect.

Insert the hard drive under backer which has hard drive to the hard drive top backer, and then, use

cross screwdriver and the screw to fix the under backer and the top backer.

Aimed the hard drive box towards the groove of the front board, level push. Please note the face

and back while pushing. Upturn the silk-screen on the right position.

Wring the lock of the front board by key. Turn the groove on the “turn on” position, lock hard drive

box to prevent hard drive from moving out.

Note : Hard drive fixing lock besides fixing the hard drive, also take the place of host power switch .So

do this operation, make sure all lines are completely connected. Otherwise, if car‘s power have

been connected with the standard input voltage, the machine should be destroyed. So while

installation, if the line has not been completely connected, please stop to do this step. More

careful when installation. The hard drive can not roll out even it has not been locked.

6 Instruction of Using

6.1 Instruction of Front Panel

LED

PWR LED: lighting while work starts. Power LED on.

RUN INDICATOR: flashing when machine work well

HDD INDICATOR: record, play, backup data flashing

3G INDICATOR: When with 3G or WIFI module, or with LINK, this led will be on if the

settings are all right and the network connects well

Wifi INDICATOR: When with WIFI module, it will be on if WIFI module works well.

ACC INDICATOR: ACC controller signal regularly,it would indicate

ALM INDICATOR: When have alarm signal, it would be on，when alarm signal disappear it

would be off.

SD INDICATOR: When the model has SD card storage function，SD card read normally then

it would indicate.

GPS INDICATOR: with GPS module, DVR work well indicate

LINK INDICATOR: when wired network connect normally, it would indicate.

Key and Other Descriptions

DEBUG：Debug interface

SIM interface: 3G interface

IR: infrared receiving window.

LOCK: while removing the hard drive, use the key to unlock in order to remove the hard drive,

unlock after machine’s auto-disconnects the power, the power auto-connect after being

locked.

USB: backup the video data of hard drive via USB .

NOTE: Recommend to use the SanDisk brand of the USB disk , the minimum

volume 256M, must support the FAT32 file system.

6.2 Instruction of Remote Control Operation

：Record

：①Lead to menu；②Return key

：Enter the submenu to do the settings and also confirm the settings

：For playback on the mobile DVR

:①Stop when record and playback; ②Delete key

：Pause/Play when playback

：Into PTZ control mode.

：Mute key, to turn on or turn off audio output when playback videos with audio.(The audio

input of the playback device must be connected to the audio output of the DVR.)

：Fast-forward when video playback, play speed can be x2, x4, x8, press one time is x2,

press two times is x4, and press 3 times is x8.

：① Exit when video playback or backup. ②Exit from PTZ mode.

：Character shortcut key: Press A-B to get all characters

:①Upward for MENU selection. ②”UP” direction for PTZ control mode.

:①Downward for MENU selection. ②”Down” direction for PTZ control mode.

:①Towards to left for MENU selection or MENU setup. ②”Left” direction for PTZ control

mode.

:①Towards to right for MENU selection or MENU setup. ②”Right” direction for PTZ control

mode.

:①screen zoom the first channel video when surveillance, record