Jay-tech FTY18 User manual

FIRST STEPS
ATTENTION: Please fully charge your smartwatch before
the first use, check that the product is complete and
remove the protective films from display and back side
(sensor area).
Please read this user manual carefully before using the
product. It contains important information for your safety
as well as instructions for use and maintenance.
Keep this user manual in a safe place.
SAFETY MEASURES
•Thisproductcontainselectricalcomponentsthatcancause injuries when used improperly. •Donotopenthehousingoftheproductortakeitapart.•Keeptheproductawayfromextremelyhighorlowtemperatures.
•Donotusetheproductinasaunaorsteambath.•Donotleavetheproductexposedtothesunforalongtime.
•Donotexposeoftheproductbyburning,theinternalbatterycanexplode.•Theproductcontainsaninternalbatterythatcannotbe changed by the user.
•Donotreadanyincomingcallnoticationsorotherinformation on the product display while driving a
vehicle, or in any other situation where distraction can
lead to dangerous situations.
•Readingofdistancetraveledcanbeinaccurate.This is only for reference and should not be used for
navigation.
•Theproductshouldnormallybewornonengerwidth below the wrist. At the same location you would
normally wear an armband.
ATTENTION: This product can cause skin irritations.
Contact over a prolonged time can promote skin irritations
or allergies in some users. If signs of skin redness,
swelling, itching or skin irritation are present, please
discontinue the use of this product. Further use may
cause renewed or more severe irritation, even if previous
symptoms have subsided.
Contact your dermatologist if symptoms persist.
WARNING
Measurements for pulse and blood pressure should
not be used for self diagnosis or treatment. Users with
blood pressure or circulatory disorders should undergo
treatments only in consultation with a physician. The
measurement results of this fitness tracker are for
reference only and should not be used for medical
purposes.
TIPS BEFORE USE
Please read this user manual carefully for correct use and
keep it in a safe place for future reference. Please charge
thetnesstrackerfor2hoursbeforerstuse.Duringthecharging process the battery symbol will appear on the
display.
INSTALL “FITPRO” APP ON YOUR
SMARTPHONE
Installthe“FITPRO”apponyoursmartphonebyscanningthisQRcode,orsearchfortheappintheAppStore(iOS)/ Google Play (Android).
Android/iOSCompatible operating system and requirements:
Bluetooth 4.2
Android 5.0 and above
iOS9.0andabove
CONNECTING FITNESS TRACKER WITH
FITPRO APP
For initial use you have to pair the fitness tracker with the
app. After successful pairing, time will be automatically
synced with the fitness tracker.
•LaunchtheFitProapp-click“Set”intheapp•Taponthegreenbar„Connectdevicestogetmorefunctions“-clickonthedevice,tostartaconnection.•Aftersuccessfulpairingtheappwillautomaticallysave the Bluetooth address of the wristband. When
the app is launched or runs in the background, it will
automatically search for the wristband and connect to
it.
•Makesure,thattheapprunsinthebackgroundandall permissions have been granted in the phone’s
system settings, such as running in the background
and reading contact information.
WRISTBAND FUNCTIONS
•Toswitchthedeviceonwhenitisswitchedoff,pressthe control panel (circle on display) for longer than 3
seconds.
•Whenthedeviceisswitchedon,butthedisplayisoff, press the control panel only briefly, to activate the
display.
•Pressthecontrolpanelofthedisplayforapprox.2seconds,toenterthesubmenu,ifavailable.Lightlytapon the control panel to move through the features of
the submenu.
•ATTENTION!Thewristbandresetfunctiondeletesalldata of the wristband (e.g. step counter).
•Inthehomescreendisplay,holdthecontrolpaneltoswitch between dial faces. After switching, the display
will switch off if no further operation is performed
within 5 seconds.
FITNESS TRACKER MENUS
1. Home screen: Time, date (steps and pulse if
applicable)
2.Steps+distance+caloriesburned3.Health:Pulse,bloodpressure,bloodoxygenlevel-pressthecontrolpanelforapprox.2sec.tostartthemeasurements.
4.Sport:Pressthecontrolpanelforapprox.2sec.toswitchbetweenthesports“running”,“jumpingrope”and“situps”bytappingbriey.Afteryourselection,pressthecontrolpanelapprox.2sec.tostartthetimer.Holdagaintoresetthetimetozero.ATTENTION!Thetimercannotbepaused!5.Message:LaunchtheFitProapp-Set-MessagePush-turnonthepermission,sothatmessagescanbe pushed to your wristband after your phone has
received them. Only the last 3 messages received will
be displayed.
6. Music: Hold the control panel on your fitness tracker
forapprox.2sec.toopenthesubmenu.Hereyoucancontrol the music playing on your smartphone. You
have the following choices: Back one song (left arrow),
forward one song (right arrow), pause/play. Briefly
tap the control panel in the submenu for the chosen
function. The symbol colored in red is the available
function. To choose the function, hold the control panel
forapprox.2sec.Note:Theredleftarrowistoleavethe menu.
7. More: a) sleep When you fall asleep, the wristband
automatically switches to sleep monitoring mode,
automatically determining your sleep quality during the
night. You can check your sleep data on the app, after
synchronization has been completed.
Note: Please wear the wristband while sleeping, so data
canberecorded.Sleepwillberecognizedafter10:00PM.Sleepdatacanbesynchronizedwiththeappafter4hoursofsleep.b)Weather,c)“Takeapicture”,holdthecontrolpanelforapprox.2sec.tostarttheprocess.Pleasenote
USER’S MANUAL
Before operating this unit,
please read this manual thoroughly
and retain it for future reference.
Fitness Tracker FTY18
EN

FIRST STEPS
ATTENTION: Please fully charge your smartwatch before
the first use, check that the product is complete and
remove the protective films from display and back side
(sensor area).
Please read this user manual carefully before using the
product. It contains important information for your safety
as well as instructions for use and maintenance.
Keep this user manual in a safe place.
SAFETY MEASURES
•Thisproductcontainselectricalcomponentsthatcancause injuries when used improperly. •Donotopenthehousingoftheproductortakeitapart.•Keeptheproductawayfromextremelyhighorlowtemperatures.
•Donotusetheproductinasaunaorsteambath.•Donotleavetheproductexposedtothesunforalongtime.
•Donotexposeoftheproductbyburning,theinternalbatterycanexplode.•Theproductcontainsaninternalbatterythatcannotbe changed by the user.
•Donotreadanyincomingcallnoticationsorotherinformation on the product display while driving a
vehicle, or in any other situation where distraction can
lead to dangerous situations.
•Readingofdistancetraveledcanbeinaccurate.This is only for reference and should not be used for
navigation.
•Theproductshouldnormallybewornonengerwidth below the wrist. At the same location you would
normally wear an armband.
ATTENTION: This product can cause skin irritations.
Contact over a prolonged time can promote skin irritations
or allergies in some users. If signs of skin redness,
swelling, itching or skin irritation are present, please
discontinue the use of this product. Further use may
cause renewed or more severe irritation, even if previous
symptoms have subsided.
Contact your dermatologist if symptoms persist.
WARNING
Measurements for pulse and blood pressure should
not be used for self diagnosis or treatment. Users with
blood pressure or circulatory disorders should undergo
treatments only in consultation with a physician. The
measurement results of this fitness tracker are for
reference only and should not be used for medical
purposes.
TIPS BEFORE USE
Please read this user manual carefully for correct use and
keep it in a safe place for future reference. Please charge
thetnesstrackerfor2hoursbeforerstuse.Duringthecharging process the battery symbol will appear on the
display.
INSTALL “FITPRO” APP ON YOUR
SMARTPHONE
Installthe“FITPRO”apponyoursmartphonebyscanningthisQRcode,orsearchfortheappintheAppStore(iOS)/ Google Play (Android).
Android/iOSCompatible operating system and requirements:
Bluetooth 4.2
Android 5.0 and above
iOS9.0andabove
CONNECTING FITNESS TRACKER WITH
FITPRO APP
For initial use you have to pair the fitness tracker with the
app. After successful pairing, time will be automatically
synced with the fitness tracker.
•LaunchtheFitProapp-click“Set”intheapp•Taponthegreenbar„Connectdevicestogetmorefunctions“-clickonthedevice,tostartaconnection.•Aftersuccessfulpairingtheappwillautomaticallysave the Bluetooth address of the wristband. When
the app is launched or runs in the background, it will
automatically search for the wristband and connect to
it.
•Makesure,thattheapprunsinthebackgroundandall permissions have been granted in the phone’s
system settings, such as running in the background
and reading contact information.
WRISTBAND FUNCTIONS
•Toswitchthedeviceonwhenitisswitchedoff,pressthe control panel (circle on display) for longer than 3
seconds.
•Whenthedeviceisswitchedon,butthedisplayisoff, press the control panel only briefly, to activate the
display.
•Pressthecontrolpanelofthedisplayforapprox.2seconds,toenterthesubmenu,ifavailable.Lightlytapon the control panel to move through the features of
the submenu.
•ATTENTION!Thewristbandresetfunctiondeletesalldata of the wristband (e.g. step counter).
•Inthehomescreendisplay,holdthecontrolpaneltoswitch between dial faces. After switching, the display
will switch off if no further operation is performed
within 5 seconds.
FITNESS TRACKER MENUS
1. Home screen: Time, date (steps and pulse if
applicable)
2.Steps+distance+caloriesburned3.Health:Pulse,bloodpressure,bloodoxygenlevel-pressthecontrolpanelforapprox.2sec.tostartthemeasurements.
4.Sport:Pressthecontrolpanelforapprox.2sec.toswitchbetweenthesports“running”,“jumpingrope”and“situps”bytappingbriey.Afteryourselection,pressthecontrolpanelapprox.2sec.tostartthetimer.Holdagaintoresetthetimetozero.ATTENTION!Thetimercannotbepaused!5.Message:LaunchtheFitProapp-Set-MessagePush-turnonthepermission,sothatmessagescanbe pushed to your wristband after your phone has
received them. Only the last 3 messages received will
be displayed.
6. Music: Hold the control panel on your fitness tracker
forapprox.2sec.toopenthesubmenu.Hereyoucancontrol the music playing on your smartphone. You
have the following choices: Back one song (left arrow),
forward one song (right arrow), pause/play. Briefly
tap the control panel in the submenu for the chosen
function. The symbol colored in red is the available
function. To choose the function, hold the control panel
forapprox.2sec.Note:Theredleftarrowistoleavethe menu.
7. More: a) sleep When you fall asleep, the wristband
automatically switches to sleep monitoring mode,
automatically determining your sleep quality during the
night. You can check your sleep data on the app, after
synchronization has been completed.
Note: Please wear the wristband while sleeping, so data
canberecorded.Sleepwillberecognizedafter10:00PM.Sleepdatacanbesynchronizedwiththeappafter4hoursofsleep.b)Weather,c)“Takeapicture”,holdthecontrolpanelforapprox.2sec.tostarttheprocess.Pleasenote
USER’S MANUAL
Before operating this unit,
please read this manual thoroughly
and retain it for future reference.
Fitness Tracker FTY18
EN

FIRST STEPS
ATTENTION: Please fully charge your smartwatch before
the first use, check that the product is complete and
remove the protective films from display and back side
(sensor area).
Please read this user manual carefully before using the
product. It contains important information for your safety
as well as instructions for use and maintenance.
Keep this user manual in a safe place.
SAFETY MEASURES
•Thisproductcontainselectricalcomponentsthatcancause injuries when used improperly. •Donotopenthehousingoftheproductortakeitapart.•Keeptheproductawayfromextremelyhighorlowtemperatures.
•Donotusetheproductinasaunaorsteambath.•Donotleavetheproductexposedtothesunforalongtime.
•Donotexposeoftheproductbyburning,theinternalbatterycanexplode.•Theproductcontainsaninternalbatterythatcannotbe changed by the user.
•Donotreadanyincomingcallnoticationsorotherinformation on the product display while driving a
vehicle, or in any other situation where distraction can
lead to dangerous situations.
•Readingofdistancetraveledcanbeinaccurate.This is only for reference and should not be used for
navigation.
•Theproductshouldnormallybewornonengerwidth below the wrist. At the same location you would
normally wear an armband.
ATTENTION: This product can cause skin irritations.
Contact over a prolonged time can promote skin irritations
or allergies in some users. If signs of skin redness,
swelling, itching or skin irritation are present, please
discontinue the use of this product. Further use may
cause renewed or more severe irritation, even if previous
symptoms have subsided.
Contact your dermatologist if symptoms persist.
WARNING
Measurements for pulse and blood pressure should
not be used for self diagnosis or treatment. Users with
blood pressure or circulatory disorders should undergo
treatments only in consultation with a physician. The
measurement results of this fitness tracker are for
reference only and should not be used for medical
purposes.
TIPS BEFORE USE
Please read this user manual carefully for correct use and
keep it in a safe place for future reference. Please charge
thetnesstrackerfor2hoursbeforerstuse.Duringthecharging process the battery symbol will appear on the
display.
INSTALL “FITPRO” APP ON YOUR
SMARTPHONE
Installthe“FITPRO”apponyoursmartphonebyscanningthisQRcode,orsearchfortheappintheAppStore(iOS)/ Google Play (Android).
Android/iOSCompatible operating system and requirements:
Bluetooth 4.2
Android 5.0 and above
iOS9.0andabove
CONNECTING FITNESS TRACKER WITH
FITPRO APP
For initial use you have to pair the fitness tracker with the
app. After successful pairing, time will be automatically
synced with the fitness tracker.
•LaunchtheFitProapp-click“Set”intheapp•Taponthegreenbar„Connectdevicestogetmorefunctions“-clickonthedevice,tostartaconnection.•Aftersuccessfulpairingtheappwillautomaticallysave the Bluetooth address of the wristband. When
the app is launched or runs in the background, it will
automatically search for the wristband and connect to
it.
•Makesure,thattheapprunsinthebackgroundandall permissions have been granted in the phone’s
system settings, such as running in the background
and reading contact information.
WRISTBAND FUNCTIONS
•Toswitchthedeviceonwhenitisswitchedoff,pressthe control panel (circle on display) for longer than 3
seconds.
•Whenthedeviceisswitchedon,butthedisplayisoff, press the control panel only briefly, to activate the
display.
•Pressthecontrolpanelofthedisplayforapprox.2seconds,toenterthesubmenu,ifavailable.Lightlytapon the control panel to move through the features of
the submenu.
•ATTENTION!Thewristbandresetfunctiondeletesalldata of the wristband (e.g. step counter).
•Inthehomescreendisplay,holdthecontrolpaneltoswitch between dial faces. After switching, the display
will switch off if no further operation is performed
within 5 seconds.
FITNESS TRACKER MENUS
1. Home screen: Time, date (steps and pulse if
applicable)
2.Steps+distance+caloriesburned3.Health:Pulse,bloodpressure,bloodoxygenlevel-pressthecontrolpanelforapprox.2sec.tostartthemeasurements.
4.Sport:Pressthecontrolpanelforapprox.2sec.toswitchbetweenthesports“running”,“jumpingrope”and“situps”bytappingbriey.Afteryourselection,pressthecontrolpanelapprox.2sec.tostartthetimer.Holdagaintoresetthetimetozero.ATTENTION!Thetimercannotbepaused!5.Message:LaunchtheFitProapp-Set-MessagePush-turnonthepermission,sothatmessagescanbe pushed to your wristband after your phone has
received them. Only the last 3 messages received will
be displayed.
6. Music: Hold the control panel on your fitness tracker
forapprox.2sec.toopenthesubmenu.Hereyoucancontrol the music playing on your smartphone. You
have the following choices: Back one song (left arrow),
forward one song (right arrow), pause/play. Briefly
tap the control panel in the submenu for the chosen
function. The symbol colored in red is the available
function. To choose the function, hold the control panel
forapprox.2sec.Note:Theredleftarrowistoleavethe menu.
7. More: a) sleep When you fall asleep, the wristband
automatically switches to sleep monitoring mode,
automatically determining your sleep quality during the
night. You can check your sleep data on the app, after
synchronization has been completed.
Note: Please wear the wristband while sleeping, so data
canberecorded.Sleepwillberecognizedafter10:00PM.Sleepdatacanbesynchronizedwiththeappafter4hoursofsleep.b)Weather,c)“Takeapicture”,holdthecontrolpanelforapprox.2sec.tostarttheprocess.Pleasenote
USER’S MANUAL
Before operating this unit,
please read this manual thoroughly
and retain it for future reference.
Fitness Tracker FTY18
EN

FIRST STEPS
ATTENTION: Please fully charge your smartwatch before
the first use, check that the product is complete and
remove the protective films from display and back side
(sensor area).
Please read this user manual carefully before using the
product. It contains important information for your safety
as well as instructions for use and maintenance.
Keep this user manual in a safe place.
SAFETY MEASURES
•Thisproductcontainselectricalcomponentsthatcancause injuries when used improperly. •Donotopenthehousingoftheproductortakeitapart.•Keeptheproductawayfromextremelyhighorlowtemperatures.
•Donotusetheproductinasaunaorsteambath.•Donotleavetheproductexposedtothesunforalongtime.
•Donotexposeoftheproductbyburning,theinternalbatterycanexplode.•Theproductcontainsaninternalbatterythatcannotbe changed by the user.
•Donotreadanyincomingcallnoticationsorotherinformation on the product display while driving a
vehicle, or in any other situation where distraction can
lead to dangerous situations.
•Readingofdistancetraveledcanbeinaccurate.This is only for reference and should not be used for
navigation.
•Theproductshouldnormallybewornonengerwidth below the wrist. At the same location you would
normally wear an armband.
ATTENTION: This product can cause skin irritations.
Contact over a prolonged time can promote skin irritations
or allergies in some users. If signs of skin redness,
swelling, itching or skin irritation are present, please
discontinue the use of this product. Further use may
cause renewed or more severe irritation, even if previous
symptoms have subsided.
Contact your dermatologist if symptoms persist.
WARNING
Measurements for pulse and blood pressure should
not be used for self diagnosis or treatment. Users with
blood pressure or circulatory disorders should undergo
treatments only in consultation with a physician. The
measurement results of this fitness tracker are for
reference only and should not be used for medical
purposes.
TIPS BEFORE USE
Please read this user manual carefully for correct use and
keep it in a safe place for future reference. Please charge
thetnesstrackerfor2hoursbeforerstuse.Duringthecharging process the battery symbol will appear on the
display.
INSTALL “FITPRO” APP ON YOUR
SMARTPHONE
Installthe“FITPRO”apponyoursmartphonebyscanningthisQRcode,orsearchfortheappintheAppStore(iOS)/ Google Play (Android).
Android/iOSCompatible operating system and requirements:
Bluetooth 4.2
Android 5.0 and above
iOS9.0andabove
CONNECTING FITNESS TRACKER WITH
FITPRO APP
For initial use you have to pair the fitness tracker with the
app. After successful pairing, time will be automatically
synced with the fitness tracker.
•LaunchtheFitProapp-click“Set”intheapp•Taponthegreenbar„Connectdevicestogetmorefunctions“-clickonthedevice,tostartaconnection.•Aftersuccessfulpairingtheappwillautomaticallysave the Bluetooth address of the wristband. When
the app is launched or runs in the background, it will
automatically search for the wristband and connect to
it.
•Makesure,thattheapprunsinthebackgroundandall permissions have been granted in the phone’s
system settings, such as running in the background
and reading contact information.
WRISTBAND FUNCTIONS
•Toswitchthedeviceonwhenitisswitchedoff,pressthe control panel (circle on display) for longer than 3
seconds.
•Whenthedeviceisswitchedon,butthedisplayisoff, press the control panel only briefly, to activate the
display.
•Pressthecontrolpanelofthedisplayforapprox.2seconds,toenterthesubmenu,ifavailable.Lightlytapon the control panel to move through the features of
the submenu.
•ATTENTION!Thewristbandresetfunctiondeletesalldata of the wristband (e.g. step counter).
•Inthehomescreendisplay,holdthecontrolpaneltoswitch between dial faces. After switching, the display
will switch off if no further operation is performed
within 5 seconds.
FITNESS TRACKER MENUS
1. Home screen: Time, date (steps and pulse if
applicable)
2.Steps+distance+caloriesburned3.Health:Pulse,bloodpressure,bloodoxygenlevel-pressthecontrolpanelforapprox.2sec.tostartthemeasurements.
4.Sport:Pressthecontrolpanelforapprox.2sec.toswitchbetweenthesports“running”,“jumpingrope”and“situps”bytappingbriey.Afteryourselection,pressthecontrolpanelapprox.2sec.tostartthetimer.Holdagaintoresetthetimetozero.ATTENTION!Thetimercannotbepaused!5.Message:LaunchtheFitProapp-Set-MessagePush-turnonthepermission,sothatmessagescanbe pushed to your wristband after your phone has
received them. Only the last 3 messages received will
be displayed.
6. Music: Hold the control panel on your fitness tracker
forapprox.2sec.toopenthesubmenu.Hereyoucancontrol the music playing on your smartphone. You
have the following choices: Back one song (left arrow),
forward one song (right arrow), pause/play. Briefly
tap the control panel in the submenu for the chosen
function. The symbol colored in red is the available
function. To choose the function, hold the control panel
forapprox.2sec.Note:Theredleftarrowistoleavethe menu.
7. More: a) sleep When you fall asleep, the wristband
automatically switches to sleep monitoring mode,
automatically determining your sleep quality during the
night. You can check your sleep data on the app, after
synchronization has been completed.
Note: Please wear the wristband while sleeping, so data
canberecorded.Sleepwillberecognizedafter10:00PM.Sleepdatacanbesynchronizedwiththeappafter4hoursofsleep.b)Weather,c)“Takeapicture”,holdthecontrolpanelforapprox.2sec.tostarttheprocess.Pleasenote
USER’S MANUAL
Before operating this unit,
please read this manual thoroughly
and retain it for future reference.
Fitness Tracker FTY18
EN

FIRST STEPS
ATTENTION: Please fully charge your smartwatch before
the first use, check that the product is complete and
remove the protective films from display and back side
(sensor area).
Please read this user manual carefully before using the
product. It contains important information for your safety
as well as instructions for use and maintenance.
Keep this user manual in a safe place.
SAFETY MEASURES
•Thisproductcontainselectricalcomponentsthatcancause injuries when used improperly. •Donotopenthehousingoftheproductortakeitapart.•Keeptheproductawayfromextremelyhighorlowtemperatures.
•Donotusetheproductinasaunaorsteambath.•Donotleavetheproductexposedtothesunforalongtime.
•Donotexposeoftheproductbyburning,theinternalbatterycanexplode.•Theproductcontainsaninternalbatterythatcannotbe changed by the user.
•Donotreadanyincomingcallnoticationsorotherinformation on the product display while driving a
vehicle, or in any other situation where distraction can
lead to dangerous situations.
•Readingofdistancetraveledcanbeinaccurate.This is only for reference and should not be used for
navigation.
•Theproductshouldnormallybewornonengerwidth below the wrist. At the same location you would
normally wear an armband.
ATTENTION: This product can cause skin irritations.
Contact over a prolonged time can promote skin irritations
or allergies in some users. If signs of skin redness,
swelling, itching or skin irritation are present, please
discontinue the use of this product. Further use may
cause renewed or more severe irritation, even if previous
symptoms have subsided.
Contact your dermatologist if symptoms persist.
WARNING
Measurements for pulse and blood pressure should
not be used for self diagnosis or treatment. Users with
blood pressure or circulatory disorders should undergo
treatments only in consultation with a physician. The
measurement results of this fitness tracker are for
reference only and should not be used for medical
purposes.
TIPS BEFORE USE
Please read this user manual carefully for correct use and
keep it in a safe place for future reference. Please charge
thetnesstrackerfor2hoursbeforerstuse.Duringthecharging process the battery symbol will appear on the
display.
INSTALL “FITPRO” APP ON YOUR
SMARTPHONE
Installthe“FITPRO”apponyoursmartphonebyscanningthisQRcode,orsearchfortheappintheAppStore(iOS)/ Google Play (Android).
Android/iOSCompatible operating system and requirements:
Bluetooth 4.2
Android 5.0 and above
iOS9.0andabove
CONNECTING FITNESS TRACKER WITH
FITPRO APP
For initial use you have to pair the fitness tracker with the
app. After successful pairing, time will be automatically
synced with the fitness tracker.
•LaunchtheFitProapp-click“Set”intheapp•Taponthegreenbar„Connectdevicestogetmorefunctions“-clickonthedevice,tostartaconnection.•Aftersuccessfulpairingtheappwillautomaticallysave the Bluetooth address of the wristband. When
the app is launched or runs in the background, it will
automatically search for the wristband and connect to
it.
•Makesure,thattheapprunsinthebackgroundandall permissions have been granted in the phone’s
system settings, such as running in the background
and reading contact information.
WRISTBAND FUNCTIONS
•Toswitchthedeviceonwhenitisswitchedoff,pressthe control panel (circle on display) for longer than 3
seconds.
•Whenthedeviceisswitchedon,butthedisplayisoff, press the control panel only briefly, to activate the
display.
•Pressthecontrolpanelofthedisplayforapprox.2seconds,toenterthesubmenu,ifavailable.Lightlytapon the control panel to move through the features of
the submenu.
•ATTENTION!Thewristbandresetfunctiondeletesalldata of the wristband (e.g. step counter).
•Inthehomescreendisplay,holdthecontrolpaneltoswitch between dial faces. After switching, the display
will switch off if no further operation is performed
within 5 seconds.
FITNESS TRACKER MENUS
1. Home screen: Time, date (steps and pulse if
applicable)
2.Steps+distance+caloriesburned3.Health:Pulse,bloodpressure,bloodoxygenlevel-pressthecontrolpanelforapprox.2sec.tostartthemeasurements.
4.Sport:Pressthecontrolpanelforapprox.2sec.toswitchbetweenthesports“running”,“jumpingrope”and“situps”bytappingbriey.Afteryourselection,pressthecontrolpanelapprox.2sec.tostartthetimer.Holdagaintoresetthetimetozero.ATTENTION!Thetimercannotbepaused!5.Message:LaunchtheFitProapp-Set-MessagePush-turnonthepermission,sothatmessagescanbe pushed to your wristband after your phone has
received them. Only the last 3 messages received will
be displayed.
6. Music: Hold the control panel on your fitness tracker
forapprox.2sec.toopenthesubmenu.Hereyoucancontrol the music playing on your smartphone. You
have the following choices: Back one song (left arrow),
forward one song (right arrow), pause/play. Briefly
tap the control panel in the submenu for the chosen
function. The symbol colored in red is the available
function. To choose the function, hold the control panel
forapprox.2sec.Note:Theredleftarrowistoleavethe menu.
7. More: a) sleep When you fall asleep, the wristband
automatically switches to sleep monitoring mode,
automatically determining your sleep quality during the
night. You can check your sleep data on the app, after
synchronization has been completed.
Note: Please wear the wristband while sleeping, so data
canberecorded.Sleepwillberecognizedafter10:00PM.Sleepdatacanbesynchronizedwiththeappafter4hoursofsleep.b)Weather,c)“Takeapicture”,holdthecontrolpanelforapprox.2sec.tostarttheprocess.Pleasenote
USER’S MANUAL
Before operating this unit,
please read this manual thoroughly
and retain it for future reference.
Fitness Tracker FTY18
EN

Note for charging the fitness tracker
Please remove the wristband at the top of the housing.
PlugtheconnectorinaregularUSBcharger(notincluded)ortheUSBportofalaptop.Thechargingprocessisindicated on the display with a battery symbol.
TECHNICAL DATA:
Battery:90mAhlithium-polymerDisplay:1.44“/3.66cmwithsingletouch(singletouchcontrol panel)
Bluetooth 4.2
Operatingtemperature:-10°C~50°CSystem:iOS9.0andabove/Android5.0andabove
SERVICE PROCESS
If you have any reason for complaints or your device
has a defect, please contact your retailer or the service
departmentofJAY-techGmbH,toarrangeforcustomerservice.
Service hours: Mon-Tuefrom8:00AMto5:00PMFridayfrom8:00AMto2:00PMTelephone no.: 02161/5758950E-mail: [e-mail] do not send the device to our address without
beingrequestedbyourserviceteam.Shippingcostandrisk of loss are borne by the sender.
We reserve the right to refuse acceptance of
unauthorized shipments and send such shipments back
tothesenderfreightcollectoratthesender’sexpense.
EU CONFORMITY DECLARATION
ThecompanyJAY-techGmbHherebydeclaresthatthedescribed product complies with the directive 2014/53/
EU and others, applicable to the product.
ThefulltextoftheEUconformitydeclarationisavailableunder the following internet address:
www.jay-tech.deThe device carries the CE mark and
complies with all required EU standards.
DIRECTIVE 2012/19/EU ON WASTE
ELECTRICAL AND ELECTRONIC EQUIPMENT
(WEEE)
Waste equipment does not belong in
householdwaste!Ifthedeviceatsomepoint in time can not be used anymore,
each consumer is required by law to
dispose of waste equipment separately
from household waste, e.g. at a municipal/
district collection point. This ensures that
waste equipment is recycled properly and
negative effects on the environment are
minimized. Thus electrical devices are
marked with this symbol.
thattheappmustbelaunchedforthis,d)“Searchfor”,holdthecontrolpanelforapprox.2sec.andthewristbandwill search for your smartphone, which will answer with a
beep,e)“Reset”,holdthecontrolpanelforapprox.2sec.and your smartwatch will reset and restart. ATTENTION:
Alldatawillbedeleted!F)QRcode,g)informationaboutthetnesstrackerandhold the control panel to switch off the smartwatch.
APP FUNCTIONS AND SETTINGS
Note:Someofthefunctionsrequireyoutologin.Please register for this on the home screen. You can skip
theregistrationprocessbytapping“skip”inthetoprightcorner.
Explanationoftheappbottombarsymbols:User profile “Mine” Please set your personal data in the
user profile after launching the app.
Setting “Set” If not already done so, you can connect to
yourtnesstrackerhere.Pressonthesubmenu“nd”andthe fitness tracker will vibrate.
Under“Messagepush”youcanchoose,whichmessagesyou want to receive.
In“Dialsettings”youcanchoosethedialdesignunder“Recommended”.Chooseadesignandtap“Syncdial”.The design is downloaded and updated.
“Resetdevice”-Attention,thiswillresetthedeviceanddeletealldata!“Remove”-Datawillbedeletedanddeviceremoved.“Others”-Vibrationsettingsofthetnesstracker.Top symbol bar:
1.Liftyourwrist:Thetnesstracker‘sdisplayisactivatedwhen you move your wrist.
2.DNDmode:Timerfornotreceivingmessages.3.Myalarms:Settingofalarms4.Longsitting:Settingforreminderswhensittingtoolong.
Tracking “Running”! At the top you can choose
betweenwalking,runningandbicycling.Tap“Start”tostart the tracking (for this you must be registered and
logged in).
First page “Steps” Here you can check the number
of steps, distance traveled, calories burned, health
assessment,pulse,sleepand“healthyhabits”(registration necessary)
Tips for Android users:
When using the reminder function, you must set that the
FitPro app can run in the background. We recommend to
grant the FitPro app all permissions.
FT-FTY18l03/2022
JAY-tech GmbH
KrefelderStrasse657D-41066MoenchengladbachGermany
Tel.02161/575890www.jay-tech.de[email protected]©2022JAY-techGmbH.Allrightsreserved.

Note for charging the fitness tracker
Please remove the wristband at the top of the housing.
PlugtheconnectorinaregularUSBcharger(notincluded)ortheUSBportofalaptop.Thechargingprocessisindicated on the display with a battery symbol.
TECHNICAL DATA:
Battery:90mAhlithium-polymerDisplay:1.44“/3.66cmwithsingletouch(singletouchcontrol panel)
Bluetooth 4.2
Operatingtemperature:-10°C~50°CSystem:iOS9.0andabove/Android5.0andabove
SERVICE PROCESS
If you have any reason for complaints or your device
has a defect, please contact your retailer or the service
departmentofJAY-techGmbH,toarrangeforcustomerservice.
Service hours: Mon-Tuefrom8:00AMto5:00PMFridayfrom8:00AMto2:00PMTelephone no.: 02161/5758950E-mail: [e-mail] do not send the device to our address without
beingrequestedbyourserviceteam.Shippingcostandrisk of loss are borne by the sender.
We reserve the right to refuse acceptance of
unauthorized shipments and send such shipments back
tothesenderfreightcollectoratthesender’sexpense.
EU CONFORMITY DECLARATION
ThecompanyJAY-techGmbHherebydeclaresthatthedescribed product complies with the directive 2014/53/
EU and others, applicable to the product.
ThefulltextoftheEUconformitydeclarationisavailableunder the following internet address:
www.jay-tech.deThe device carries the CE mark and
complies with all required EU standards.
DIRECTIVE 2012/19/EU ON WASTE
ELECTRICAL AND ELECTRONIC EQUIPMENT
(WEEE)
Waste equipment does not belong in
householdwaste!Ifthedeviceatsomepoint in time can not be used anymore,
each consumer is required by law to
dispose of waste equipment separately
from household waste, e.g. at a municipal/
district collection point. This ensures that
waste equipment is recycled properly and
negative effects on the environment are
minimized. Thus electrical devices are
marked with this symbol.
thattheappmustbelaunchedforthis,d)“Searchfor”,holdthecontrolpanelforapprox.2sec.andthewristbandwill search for your smartphone, which will answer with a
beep,e)“Reset”,holdthecontrolpanelforapprox.2sec.and your smartwatch will reset and restart. ATTENTION:
Alldatawillbedeleted!F)QRcode,g)informationaboutthetnesstrackerandhold the control panel to switch off the smartwatch.
APP FUNCTIONS AND SETTINGS
Note:Someofthefunctionsrequireyoutologin.Please register for this on the home screen. You can skip
theregistrationprocessbytapping“skip”inthetoprightcorner.
Explanationoftheappbottombarsymbols:User profile “Mine” Please set your personal data in the
user profile after launching the app.
Setting “Set” If not already done so, you can connect to
yourtnesstrackerhere.Pressonthesubmenu“nd”andthe fitness tracker will vibrate.
Under“Messagepush”youcanchoose,whichmessagesyou want to receive.
In“Dialsettings”youcanchoosethedialdesignunder“Recommended”.Chooseadesignandtap“Syncdial”.The design is downloaded and updated.
“Resetdevice”-Attention,thiswillresetthedeviceanddeletealldata!“Remove”-Datawillbedeletedanddeviceremoved.“Others”-Vibrationsettingsofthetnesstracker.Top symbol bar:
1.Liftyourwrist:Thetnesstracker‘sdisplayisactivatedwhen you move your wrist.
2.DNDmode:Timerfornotreceivingmessages.3.Myalarms:Settingofalarms4.Longsitting:Settingforreminderswhensittingtoolong.
Tracking “Running”! At the top you can choose
betweenwalking,runningandbicycling.Tap“Start”tostart the tracking (for this you must be registered and
logged in).
First page “Steps” Here you can check the number
of steps, distance traveled, calories burned, health
assessment,pulse,sleepand“healthyhabits”(registration necessary)
Tips for Android users:
When using the reminder function, you must set that the
FitPro app can run in the background. We recommend to
grant the FitPro app all permissions.
FT-FTY18l03/2022
JAY-tech GmbH
KrefelderStrasse657D-41066MoenchengladbachGermany
Tel.02161/575890www.jay-tech.de[email protected]©2022JAY-techGmbH.Allrightsreserved.

Note for charging the fitness tracker
Please remove the wristband at the top of the housing.
PlugtheconnectorinaregularUSBcharger(notincluded)ortheUSBportofalaptop.Thechargingprocessisindicated on the display with a battery symbol.
TECHNICAL DATA:
Battery:90mAhlithium-polymerDisplay:1.44“/3.66cmwithsingletouch(singletouchcontrol panel)
Bluetooth 4.2
Operatingtemperature:-10°C~50°CSystem:iOS9.0andabove/Android5.0andabove
SERVICE PROCESS
If you have any reason for complaints or your device
has a defect, please contact your retailer or the service
departmentofJAY-techGmbH,toarrangeforcustomerservice.
Service hours: Mon-Tuefrom8:00AMto5:00PMFridayfrom8:00AMto2:00PMTelephone no.: 02161/5758950E-mail: [e-mail] do not send the device to our address without
beingrequestedbyourserviceteam.Shippingcostandrisk of loss are borne by the sender.
We reserve the right to refuse acceptance of
unauthorized shipments and send such shipments back
tothesenderfreightcollectoratthesender’sexpense.
EU CONFORMITY DECLARATION
ThecompanyJAY-techGmbHherebydeclaresthatthedescribed product complies with the directive 2014/53/
EU and others, applicable to the product.
ThefulltextoftheEUconformitydeclarationisavailableunder the following internet address:
www.jay-tech.deThe device carries the CE mark and
complies with all required EU standards.
DIRECTIVE 2012/19/EU ON WASTE
ELECTRICAL AND ELECTRONIC EQUIPMENT
(WEEE)
Waste equipment does not belong in
householdwaste!Ifthedeviceatsomepoint in time can not be used anymore,
each consumer is required by law to
dispose of waste equipment separately
from household waste, e.g. at a municipal/
district collection point. This ensures that
waste equipment is recycled properly and
negative effects on the environment are
minimized. Thus electrical devices are
marked with this symbol.
thattheappmustbelaunchedforthis,d)“Searchfor”,holdthecontrolpanelforapprox.2sec.andthewristbandwill search for your smartphone, which will answer with a
beep,e)“Reset”,holdthecontrolpanelforapprox.2sec.and your smartwatch will reset and restart. ATTENTION:
Alldatawillbedeleted!F)QRcode,g)informationaboutthetnesstrackerandhold the control panel to switch off the smartwatch.
APP FUNCTIONS AND SETTINGS
Note:Someofthefunctionsrequireyoutologin.Please register for this on the home screen. You can skip
theregistrationprocessbytapping“skip”inthetoprightcorner.
Explanationoftheappbottombarsymbols:User profile “Mine” Please set your personal data in the
user profile after launching the app.
Setting “Set” If not already done so, you can connect to
yourtnesstrackerhere.Pressonthesubmenu“nd”andthe fitness tracker will vibrate.
Under“Messagepush”youcanchoose,whichmessagesyou want to receive.
In“Dialsettings”youcanchoosethedialdesignunder“Recommended”.Chooseadesignandtap“Syncdial”.The design is downloaded and updated.
“Resetdevice”-Attention,thiswillresetthedeviceanddeletealldata!“Remove”-Datawillbedeletedanddeviceremoved.“Others”-Vibrationsettingsofthetnesstracker.Top symbol bar:
1.Liftyourwrist:Thetnesstracker‘sdisplayisactivatedwhen you move your wrist.
2.DNDmode:Timerfornotreceivingmessages.3.Myalarms:Settingofalarms4.Longsitting:Settingforreminderswhensittingtoolong.
Tracking “Running”! At the top you can choose
betweenwalking,runningandbicycling.Tap“Start”tostart the tracking (for this you must be registered and
logged in).
First page “Steps” Here you can check the number
of steps, distance traveled, calories burned, health
assessment,pulse,sleepand“healthyhabits”(registration necessary)
Tips for Android users:
When using the reminder function, you must set that the
FitPro app can run in the background. We recommend to
grant the FitPro app all permissions.
FT-FTY18l03/2022
JAY-tech GmbH
KrefelderStrasse657D-41066MoenchengladbachGermany
Tel.02161/575890www.jay-tech.de[email protected]©2022JAY-techGmbH.Allrightsreserved.

Note for charging the fitness tracker
Please remove the wristband at the top of the housing.
PlugtheconnectorinaregularUSBcharger(notincluded)ortheUSBportofalaptop.Thechargingprocessisindicated on the display with a battery symbol.
TECHNICAL DATA:
Battery:90mAhlithium-polymerDisplay:1.44“/3.66cmwithsingletouch(singletouchcontrol panel)
Bluetooth 4.2
Operatingtemperature:-10°C~50°CSystem:iOS9.0andabove/Android5.0andabove
SERVICE PROCESS
If you have any reason for complaints or your device
has a defect, please contact your retailer or the service
departmentofJAY-techGmbH,toarrangeforcustomerservice.
Service hours: Mon-Tuefrom8:00AMto5:00PMFridayfrom8:00AMto2:00PMTelephone no.: 02161/5758950E-mail: [email protected]Please do not send the device to our address without
beingrequestedbyourserviceteam.Shippingcostandrisk of loss are borne by the sender.
We reserve the right to refuse acceptance of
unauthorized shipments and send such shipments back
tothesenderfreightcollectoratthesender’sexpense.
EU CONFORMITY DECLARATION
ThecompanyJAY-techGmbHherebydeclaresthatthedescribed product complies with the directive 2014/53/
EU and others, applicable to the product.
ThefulltextoftheEUconformitydeclarationisavailableunder the following internet address:
www.jay-tech.deThe device carries the CE mark and
complies with all required EU standards.
DIRECTIVE 2012/19/EU ON WASTE
ELECTRICAL AND ELECTRONIC EQUIPMENT
(WEEE)
Waste equipment does not belong in
householdwaste!Ifthedeviceatsomepoint in time can not be used anymore,
each consumer is required by law to
dispose of waste equipment separately
from household waste, e.g. at a municipal/
district collection point. This ensures that
waste equipment is recycled properly and
negative effects on the environment are
minimized. Thus electrical devices are
marked with this symbol.
thattheappmustbelaunchedforthis,d)“Searchfor”,holdthecontrolpanelforapprox.2sec.andthewristbandwill search for your smartphone, which will answer with a
beep,e)“Reset”,holdthecontrolpanelforapprox.2sec.and your smartwatch will reset and restart. ATTENTION:
Alldatawillbedeleted!F)QRcode,g)informationaboutthetnesstrackerandhold the control panel to switch off the smartwatch.
APP FUNCTIONS AND SETTINGS
Note:Someofthefunctionsrequireyoutologin.Please register for this on the home screen. You can skip
theregistrationprocessbytapping“skip”inthetoprightcorner.
Explanationoftheappbottombarsymbols:User profile “Mine” Please set your personal data in the
user profile after launching the app.
Setting “Set” If not already done so, you can connect to
yourtnesstrackerhere.Pressonthesubmenu“nd”andthe fitness tracker will vibrate.
Under“Messagepush”youcanchoose,whichmessagesyou want to receive.
In“Dialsettings”youcanchoosethedialdesignunder“Recommended”.Chooseadesignandtap“Syncdial”.The design is downloaded and updated.
“Resetdevice”-Attention,thiswillresetthedeviceanddeletealldata!“Remove”-Datawillbedeletedanddeviceremoved.“Others”-Vibrationsettingsofthetnesstracker.Top symbol bar:
1.Liftyourwrist:Thetnesstracker‘sdisplayisactivatedwhen you move your wrist.
2.DNDmode:Timerfornotreceivingmessages.3.Myalarms:Settingofalarms4.Longsitting:Settingforreminderswhensittingtoolong.
Tracking “Running”! At the top you can choose
betweenwalking,runningandbicycling.Tap“Start”tostart the tracking (for this you must be registered and
logged in).
First page “Steps” Here you can check the number
of steps, distance traveled, calories burned, health
assessment,pulse,sleepand“healthyhabits”(registration necessary)
Tips for Android users:
When using the reminder function, you must set that the
FitPro app can run in the background. We recommend to
grant the FitPro app all permissions.
FT-FTY18l03/2022
JAY-tech GmbH
KrefelderStrasse657D-41066MoenchengladbachGermany
Tel.02161/575890www.jay-tech.de[email protected]©2022JAY-techGmbH.Allrightsreserved.

Note for charging the fitness tracker
Please remove the wristband at the top of the housing.
PlugtheconnectorinaregularUSBcharger(notincluded)ortheUSBportofalaptop.Thechargingprocessisindicated on the display with a battery symbol.
TECHNICAL DATA:
Battery:90mAhlithium-polymerDisplay:1.44“/3.66cmwithsingletouch(singletouchcontrol panel)
Bluetooth 4.2
Operatingtemperature:-10°C~50°CSystem:iOS9.0andabove/Android5.0andabove
SERVICE PROCESS
If you have any reason for complaints or your device
has a defect, please contact your retailer or the service
departmentofJAY-techGmbH,toarrangeforcustomerservice.
Service hours: Mon-Tuefrom8:00AMto5:00PMFridayfrom8:00AMto2:00PMTelephone no.: 02161/5758950E-mail: [email protected]Please do not send the device to our address without
beingrequestedbyourserviceteam.Shippingcostandrisk of loss are borne by the sender.
We reserve the right to refuse acceptance of
unauthorized shipments and send such shipments back
tothesenderfreightcollectoratthesender’sexpense.
EU CONFORMITY DECLARATION
ThecompanyJAY-techGmbHherebydeclaresthatthedescribed product complies with the directive 2014/53/
EU and others, applicable to the product.
ThefulltextoftheEUconformitydeclarationisavailableunder the following internet address:
www.jay-tech.deThe device carries the CE mark and
complies with all required EU standards.
DIRECTIVE 2012/19/EU ON WASTE
ELECTRICAL AND ELECTRONIC EQUIPMENT
(WEEE)
Waste equipment does not belong in
householdwaste!Ifthedeviceatsomepoint in time can not be used anymore,
each consumer is required by law to
dispose of waste equipment separately
from household waste, e.g. at a municipal/
district collection point. This ensures that
waste equipment is recycled properly and
negative effects on the environment are
minimized. Thus electrical devices are
marked with this symbol.
thattheappmustbelaunchedforthis,d)“Searchfor”,holdthecontrolpanelforapprox.2sec.andthewristbandwill search for your smartphone, which will answer with a
beep,e)“Reset”,holdthecontrolpanelforapprox.2sec.and your smartwatch will reset and restart. ATTENTION:
Alldatawillbedeleted!F)QRcode,g)informationaboutthetnesstrackerandhold the control panel to switch off the smartwatch.
APP FUNCTIONS AND SETTINGS
Note:Someofthefunctionsrequireyoutologin.Please register for this on the home screen. You can skip
theregistrationprocessbytapping“skip”inthetoprightcorner.
Explanationoftheappbottombarsymbols:User profile “Mine” Please set your personal data in the
user profile after launching the app.
Setting “Set” If not already done so, you can connect to
yourtnesstrackerhere.Pressonthesubmenu“nd”andthe fitness tracker will vibrate.
Under“Messagepush”youcanchoose,whichmessagesyou want to receive.
In“Dialsettings”youcanchoosethedialdesignunder“Recommended”.Chooseadesignandtap“Syncdial”.The design is downloaded and updated.
“Resetdevice”-Attention,thiswillresetthedeviceanddeletealldata!“Remove”-Datawillbedeletedanddeviceremoved.“Others”-Vibrationsettingsofthetnesstracker.Top symbol bar:
1.Liftyourwrist:Thetnesstracker‘sdisplayisactivatedwhen you move your wrist.
2.DNDmode:Timerfornotreceivingmessages.3.Myalarms:Settingofalarms4.Longsitting:Settingforreminderswhensittingtoolong.
Tracking “Running”! At the top you can choose
betweenwalking,runningandbicycling.Tap“Start”tostart the tracking (for this you must be registered and
logged in).
First page “Steps” Here you can check the number
of steps, distance traveled, calories burned, health
assessment,pulse,sleepand“healthyhabits”(registration necessary)
Tips for Android users:
When using the reminder function, you must set that the
FitPro app can run in the background. We recommend to
grant the FitPro app all permissions.
FT-FTY18l03/2022
JAY-tech GmbH
KrefelderStrasse657D-41066MoenchengladbachGermany
Tel.02161/575890www.jay-tech.de[email protected]©2022JAY-techGmbH.Allrightsreserved.