Jaycar Electronics AC1700 User manual

USER MANUAL
Table of Contents
1.0 Introduction….......................................................................1
2.0Specifications…………………………………….………..……1
3.0 Package Contents………………………………………….…..2
4.0 Panel Descriptions…………………………………….…….…3
5.0 Connection and Operation..................................................3

HDMI Splitter 1X2 with full 3D and 4Kx2K (340MHz)
１
HDMI Splitter 1X2 with Full 3D and 4Kx2K
(340MHz), Pigtail Type
1.0 INTRODUCTION
This HDMI Amplifier Splitter is an HDMI splitter with two outputs. It distributes the
input of the HDMI signal into the two identical outputs simultaneously. It adopted
pigtail type design to reduce cost and provide more convenience for customers. It
supports full 3D format and 4Kx2K. Its video amplifier bandwidth can be up to 3.4
Gpbs/340MHz.
This HDMI Amplifier Splitter offers solutions for HDTV retail and show site,
HDTV, STB, DVD and Projector factory, noise, space and security concerns, data
center control, information distribution, conference room presentation, school and
corporate training environments.
1.1 FEATURES
This HDMI Splitter has many features that enable it to perform in a superior
manner. Among those features you will find:
Easy to Use: Install in seconds, no need of setting.
One HDMI Input, two HDMI outputs
Supports Full 3D and 4Kx2K resolution.
Supports highest video resolution 1080p.
Supports 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth.
Supports 12bit per channel (36bit all channel) deep color.
Supports HDCP 1.3
Supports uncompressed audio such as LPCM
Supports compressed audio such as DTS Digital, Dolby Digital（including
DTS-HD and Dolby True HD）.
2.0 SPECIFICATIONS
Signal Inputs/Output
Input DDC Signal
5 volts p-p (TTL)
Maximum Single Link Range
4kX2k
Output Video
HDMI(with full 3D and 4Kx2K)
Operating Frequency
Vertical Frequency Range
50/60Hz
Video Amplifier Bandwidth
3.4Gbps/340MHz
Resolutions(HDTV)
Interlaced(50&60Hz)
480i,576i,1080i
Progressive(50&60Hz)
480p,576p,720p,1080p,4Kx2K

HDMI Splitter 1X2 with full 3D and 4Kx2K (340MHz)
２
Mechanical
Size(L-W-H)
63×54×18mm
Warranty
Limited Warranty
1 Year Parts and Labor
Environmental
Operating Temperature
0℃to +70℃
Operating Humidity
10% to 85 % RH (no condensation)
Storage Temperature
-10
℃
to +80
℃
Storage Humidity
5% to 90 % RH (no condensation)
Power Requirement
External Power Supply
5V DC@ 2A
Power consumption (Max)
8W
Note: Specifications are subject to change without notice.
3.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the
following items are contained in the shipping carton:
1) Main unit
2) 5V DC Power Supply.
3) User’s Manual.
4.0 PANEL DESCRIPTIONS
5.0 CONNECTION AND OPERATION
1) Plug the Pigtail of the HDMI Splitter into HDMI source device.
2) Connect output devices to the outputs of the HDMI Splitter by using HDMI

HDMI Splitter 1X2 with full 3D and 4Kx2K (340MHz)
３
cable. (HDMI cables are optional)
*please refer to the connection diagram section.
3) Insert the DC side of 5v power supply into it and then connect the AC side of
the power supply into the wall outlet.
Attention: Insert / Extract cable gently.
5.1 CONNECTION DIAGRAM
P/N 3022