Jazz Hipster Corporation JS3218AA User manual

TV Soundbar
User Manual
Jazz Hipster Corporation
JS3218AA / JS3218WA / JS3228AA / JS3228WA

Warning
For Customers in Europe
The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the apparatus
The mains plug is used as the disconnected device, which shall remain operable all time.
This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over
to the applicable collection point for the
recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly,
you will help prevent potential negative
consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this product.
The recycling of materials will help to conserve
natural resources.
For more detailed information about recycling of
this product, please contact your local Civic
Office, your household waste disposal service or
the shop where you purchased the product.
Disposal of Old Electrical &
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)
Disposal of waste
batteries (applicable in
the European Union and
other European countries
with separate collection
systems)
This symbol on the battery or on the packaging
indicates that the battery provided with this
product shall not be treated as household waste.
On certain batteries this symbol might be used in
combination with a chemical symbol. The
chemical symbols for mercury (Hg) or lead (Pb)
are added if the battery contains more than
0.0005% mercury or 0.004% lead.
By ensuring these batteries are disposed of
correctly, you will help prevent potentially
negative consequences for the environment and
human health which could otherwise be caused
by inappropriate waste handling of the battery.
The recycling of the materials will help to
conserve natural resources.
In case of products that for safety, performance
or data integrity reasons require a permanent
connection with an incorporated battery, this
battery should be replaced by qualified service
staff only.
To ensure that the battery will be treated
properly, hand over the product at end-of-life to
the applicable collection point for the recycling
of electrical and electronic equipment.
For all other batteries, please view the section on
how to remove the battery from the product
safely.
Hand the battery over to the applicable
collection point for the recycling of waste
batteries.
For more detailed information about recycling of
this product or battery, please contact your local
Civic Office, your household waste disposal
service or the shop where you purchased the
product.
IC Statements
(English & Français )
IC Regulations:This device complies with
Industry Canada license-exempt RSS

FCC Statements
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures：
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected. Consult the dealer or an experienced
radio/TV technician for help.
FCC Caution: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to
operate this equipment. This device complies
with Part 15 of the FCC Rules. Operation is
subjectto the following two conditions: (1) This
device may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
IC Statements
IC Regulations:This device complies with
Industry Canada license-exempt RSS
standard(s). Operation is subject to the following
two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired
operation of the device.
Le présentappareilestconformeaux CNR
d'IndustrieCanada applicablesaux appareilsradio
exempts de licence.
L'exploitationestautoriséeaux deuxconditions
suivantes:
(1) l'appareilne doitpas produirede brouillage, et
(2) l'utilisateurde l'appareildoitaccepter tout
brouillageradioélectriquesubi, mêmesile
brouillageestsusceptible d'encompromettrele
fonctionnement.
“This Class B digital apparatus complies with
Canadian ICES-003.
Cetappareilnumériquede la classeB
estconformeàla normeNMB-003 du Canada.
This Category II radiocommunicationdevice
complies with Industry Canada Standard
RSS-310. Cedispositifde radiocommunicationde
catégorieII respectela normeCNR-310
d’IndustrieCanada.
IMPORTANT NOTE:
IC Radiation Exposure Statement
This device and its antenna(s) must not be
co-located or operating in conjunction with any
other antenna or transmitter.
I'appareil et son antenne ne doivent pas être
co-localisées ou opérant en conjonction avec une
autre antenne ou transmetteur.
Radiation Exposure Statement
This equipment complies with FCC/IC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed
and operated with minimum distance 20cm
between the radiator & your body. This
transmitter must not be co-located or operating
in conjunction with any other antenna or
transmitter.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a damp cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized-type plug. A polarized plug has two blades with one wider than the other.
The wide blade is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lighting storms or when unused for long periods of time.
13. Refer all servicing to qualified service personal. Servicing is required when the apparatus has been damaged in any way, such
as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
15. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be
placed on the apparatus.
16. The MAINS plug is used as the disconnect device and shall remain readily operable.
17. Changes or modifications are not expressly approved by the manufacturer could void the user's authority to
operate the equipment. Changes or modifications to the device may void FCC and CE
compliance. In frequently used radio links should be tested
regularly to protect against undetected interference or
fault.
Outdoor use or wet location applications:
An apparatus that does not comply with the requirements (Outdoor Use and Wet Location Apparatus) shall be marked or the
instruction manual packed with the word "WARNING" and the following or equivalent. To reduce the risk of fine or electric
shock, do not expose this apparatus to rain or moisture. A Class II APPARATUS shall be permanently marked with the words
"DOUBLE INSULATION" or "Double Insulated" and "When servicing use only identical replacement parts."

Accessories
Operating instruction (1)
Remote control (1)
CR2025 battery (1)
Audio cable –RCA to 3.5mm stereo plug (1)
24V 2.5A Power adapter (1)
EU plug power cord (1)
Front (JS3228AA / JS3228WA)
Back (JS3218AA / JS3218WA/ JS3228AA / JS3228WA)
Front (JS3218AA / JS3218WA)
Illustration
Table of Contents
Illustrations
Accessories
Quick instruction –Units & Functions
Table of Contents
Illustrations
Accessories
Quick instruction –Units & Functions
Precautions
Product specification

The soundbar comes with rubber feet already attached,
so it will sit securely on any flat surface. Just center the bar
under your TV screen. If your TV is housed in a media
center, you can place the bar above the TV.
If your TV is wall mounted, the bar can mount right beneath
it. The bar has built-in keyhole slots that make it easy.
Note: The rubber feet are not detachable and cannot be
removed.
Overall Dimensions
1. 8.1 cm
2. 81.5 cm
Keyhole Slots
3. 37 cm
Top of Bar to Keyhole Slots
4. 2.05 cm
Note: If you wall mount your Soundbar, ensure that your
wall anchors secure properly into the wall and that they can
bear the weight of the Soundbar, which is 1.88 kg.
SOURCE MUTE LEARNSOURCE MUTE LEARN
Warning
To prevent injury, this apparatus must be securely attached
to the floor/wall in accordance with the installation
instructions.
Remote Control
Where to Locate Your TV Soundbar
JS3218WA / JS3228WA
JS3218AA / JS3228AA

Units / Function ( for JS3218AA & JS3218WA )
*13, 15, 16 for JS3218AA
1 Power On/Off (press 0.3 sec)
Change mode (short press)
2 Volume Down (short press)
3 Source
(press 0.1 sec –change
Aux/Optical/Bluetooth)
(press 0.3 sec –pairing Bluetooth device)
4 Volume Up (short press)
5Source LED indicator
6Audio IN jack
14 Silent Mode
7Optical IN jack
15 Bluetooth pairing (JS3218WA only)
8AC adaptor connector
Movie Mode (JS3218AA only)
9Power On/Off
16 Game Voice Mode
10 Volume Up
17 Music Mode (JS3218WA only)
11 Volume Down
12 Change Mode
13 Music Mode (JS3218AA only)
Movie Mode (JS3218WA only)

1 Power On/Off (press 0.3 sec)
2 Volume Down (short press)
3 Source
(press 0.1 sec –change
Aux/Optical/Bluetooth)
(press 0.3 sec –pairing Bluetooth device)
4 Volume Up (short press)
5 Mode (short press to change mode)
6 Source LED indicator
7 Audio IN jack
15 Silent Mode
8 Optical IN jack
16 Bluetooth pairing (JS3228WA only)
9 AC adaptor connector
Movie Mode (JS3228AA only)
10 Power On/Off
17 Game Voice Mode
11 Volume Up
18 Music Mode (JS3228WA only)
12 Volume Down
13 Change Mode
14 Music Mode (JS3228AA only)
Movie Mode (JS3228WA only)
Units / Function ( for JS3228AA & JS3228WA )
*14, 16, 17 for JS3228AA

1Turn on the soundbar, or make sure the unit is in
standby mode.
2Turn on the TV.
3Adjust the volume of the soundbar.
If the sound output jack of the TV can be set to
“Variable”, the volume of the soundbar can be
changed by adjusting the TV volume. For TV
settings, refer to the operating instruction of the
TV.
1Set the sound output jack of the TV to “Variable”.
2Adjust the volume of the unit according to the TV
3Adjust the volume of the soundbar
Sound field
Effect
MOVIE
Suitable for use for a wide range of sources of any type.
MUSIC
Provides dynamic sound and realistic sensation.
GAME / VOICE
Features easy-to-hear dialogue and clear sound.
Listening to TV sound from the sound bar
Control the volume of the unit by adjusting
the TV volume
Control the volume of the unit by adjusting
your sound bar
Selecting the sound field
Press one of the sound field buttons you want to use.

1New Device Reconnect:
The original connected device must forget the
Bluetooth connection of Ennovia SB4012 first, and
then follow the Bluetooth connection method A or B,
step 1 to 5, for connecting a new device.
2For Current Device:
The connected device will automatically connect
when system power on or when switch back to
Bluetooth from different input source. Only when the
connected device chooses “forget the soundbar
domain name”, Ennovia SB4012 will be able to
reconnect new device.
1Press on front panel to switch the source to
Bluetooth Mode ,
2LED light of Bluetooth sign turns on .
3Press 1 second, light starts breathing , after
5 seconds sound tone indicated “du du”, the system
into pairing mode .
4Turn on the Device Bluetooth connect. Select the
Bluetooth domain name [Ennovia SB4012]
5There is no No password required. After the “Beep”
sound tone, the system is successfully connected.
1Press on remote control to switch the source to
Bluetooth Mode ,
2LED light of Bluetooth sign turn on in soundbar .
3Press button on remote control light starts
breathing , after 5 seconds sound tone indicated “du
du”, the system go into pairing mode .
4Turn on the Device Bluetooth connect. Select the
Bluetooth domain name [Ennovia SB4012]
5There is no No password required. After the “Beep”
sound tone, the system is successfully connected.
Reconnecting
A. Pairing from control panel
B. Pairing from remote control
Bluetooth Pairing Process (for JS3218WA and JS3228WA)

Precautions
On safety
Should any solid object or liquid get into the
unit, unplug the unit, and have it checked by
qualified personnel before operating it again
.
On power sources
•Before operating the unit, check that the
operating voltage is identical with your local
power supply.
•Do not plug the AC power cord (mains lead)
for the unit into an electrical outlet until you
have made all other connections. Make sure the
TV or other equipment is unplugged from the
electrical outlet prior to connecting it to the unit.
•Do not connect the AC power cord (mains
lead) to a voltage transformer or inverter.
Connecting the AC power cord (mains lead) to a
voltage transformer for overseas travel or an
inverter for use in an automobile may cause heat
to build up in the AC adaptor and may cause
burns or a malfunction.
•Do not use an AC adaptor or AC power cord
(mains lead) other than the supplied AC adaptor
and AC power cord (mains lead). Do not modify
the cord.
•Do not touch the plug of the AC power cord
(mains lead) with wet hands.
•Do not touch the AC power cord (mains lead),
AC adaptor or the unit, if connected to an
electrical outlet, during an electrical storm.
•Do not place heavy items on the cord.
•Do not place the AC power cord (mains lead)
near heating equipment and do not expose the
cord to heat.
•Completely disconnect theAC power cord
(mains lead) from the wall socket (mains) if it is
not going to be used for an extended period of
time. When unplugging the unit, always grip the
plug. Never pull the cord itself.
•Do not place the unit in an inclined position
or in locations that are extremely hot, cold,
dusty, dirty, or humid or lacking adequate
ventilation, or subject to vibration, direct
sunlight or a bright light.
•Be careful when placing the unit on surfaces
that have been specially treated (for example,
with wax, oil, polish) as staining or discoloration
of the surface may result.
•Since a strong magnet is used for the
speakers, keep personal credit cards using
magnetic coding or spring-wound watches away
from the unit to prevent possible damage from
the magnet.
On heat buildup
•Heat buildup on the unit during operation is
normal and is not a cause for alarm.
•Do not touch the cabinet if it has been used
continuously at a high volume because the
cabinet may have become hot.
•Do not obstruct the ventilation holes.
On cleaning
Clean this unit with a soft cloth slightly
moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring
powder, or solvent, such as thinner, benzine, or
alcohol.
Specifications
1. Speaker: 20w*2 (2.0ch)
2. Amplifier: Class D
3. Sound effect: Movie/Music/Voice/Game
4. IR Remoter: Yes
5. LED indicator: Yes
6. Operate indicate: LED
7. Input Source:
7.1 Analog: 3.5mm Phone Jack
7.2 Digital: Optical
7.3 Digital: Bluetooth
8. User Interface key: Button (5 keys)
9. Gradually Volume Control: Power
ON/Source Change
10. Output Gain:-∞dB,-40dB ~ +4dB
11. Power Supply: 24V/2.5A DC input