JB INDUSTRIES DV-40S User manual

QUICK START GUIDE
TM
JB INDUSTRIES
WWW.JBIND.COM 800.323.0811 [email protected]
DV-40S
WIRELESS MICRON GAUGE

To turn power on/off, press blue power
button on bottom of DV-40S once
To charge unit, plug micro-USB into female
micro-USB port on bottom of DV-40S
HOW TO TURN ON/OFF DV-40S
WIRELESS MICRON GAUGE
1
2

REQUIREMENT:
Apple iPhone 4s or higher and iPad 3 or higher
OR
Android 4.3 or higher
INSTALL THE FREE JB DV-40S APP
Available in the Apple App Store
and Google Play for Android
CONNECTING A SMART DEVICE
TO DV-40S

BEGIN WITH DV-40S OFF AND AN UNPAIRED TABLET OR PHONE
Bluetooth On
Turn on the smart device (tablet or phone)
Turn on Bluetooth in your smart device settings
Turn on the DV-40S on by pressing the blue
power button
1
2
3

Touch the “JB” icon at the upper left of the app
From the expanding menu, select “Scan”
to search for compatible devices
4
5

IF THE DV-40S DOES NOT APPEAR IN THE LIST OF DETECTED DEVICES:
Make sure it is unpaired from any other, previously used, smart device.
Turn off both the DV-40s and smart device, and start over from step one.
Select your vacuum gauge from the list of
detected devices
6
CONNECTING A SMART DEVICE
TO DV-40S (CONTINUED)

Verify the connection by looking at the signal
strength indicator on the DV-40S
The DV-40S is now paired to your smart device
and is ready for use
IF THE DV-40S DOES NOT CONNECT AFTER SELECTING IT:
Make sure it is unpaired from any other, previously used, smart device.
Turn off both the DV-40s and smart device, and start over from step one.
7
8
FULL CONNECTION
NOT CONNECTED

FOR MORE INFORMATION
ON THE JB DV-40S
WIRELESS MICRON GAUGE
& FULL MANUAL VISIT US
AT WWW.JBIND.COM
TM
JB INDUSTRIES
WWW.JBIND.COM 800.323.0811 [email protected]
CONNECT WITH US
Form No. DV-40S-308