jbc PH218 User manual

INSTRUCTION MANUAL
Thermocouple Type K
PH218

Features and Connections
Clamp for
better fastening
PH218 Thermocouple
Type K ................................ 1 unit
Manual ............................... 1 unit
Ref. 0028991
The following items are included:
Packing List
This manual corresponds to the following references:
PH218
Connection to
JBC device.
The Thermocouple Type K reads the temperature on a specific point
of the PCB.
PH218 helps to manage the temperature profiles when used with
JBC’s preheaters and hot airs stations. It also works with TID, JBC’s
digital thermometer.
Fix the wire end with
kapton tape on the
PCB/Component
2
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

PHXLE
PHXL-SA
PHB-SA
PHS-SA
PHN-SA
PHBE DESPIECE PHB
PHSE
PHNE
OK
14:15
20ºC
Power
45%
TC1
45ºC
Selected 120ºC
TC2
P100ºC
20ºC
TC3
P100ºC
20ºC
TC4
P100ºC
14:15
20ºC
Power
45%
Selected power
45%
TC1
P100ºC
20ºC
TC3
P100ºC
20ºC
TC4
P100ºC
20ºC
TC2
P100ºC
14:15
20 ºC
T1 23 ºC
20
5’ 8’
ºC
120 ºC
T3
24 ºC
T7
StopPROFILE1
200
100
14:15
31ºC27ºC
TC1 TC2
StopPROFILE1
200
100
14:15
200
150
100
50
300
250
14:15
5m 00s
120ºC
PROFILE1
200
100
14:15
30ºC
Power
45%
Selected power
45%
TC1
C100ºC
---ºC
TC2
P100ºC
0 60 120 180 240 300
Point
2/3
Temp Time
2m 00s
14:15
20ºC20 ºC
TC1 TC2
20ºC
TC3
20ºC
TC4
StopPROFILE1
200
100
Ext. Temp [ºC]Power [%]
14:15
20ºC
Power
45%
TC1
45ºC
Selected 120ºC
TC2
P100ºC
20ºC
TC3
P100ºC
20ºC
TC4
P100ºC
14:15
20ºC
Power
45%
TC1
45ºC
Selected 120ºC
Max. Rate
1.6ºC/s
Max. Rate
1.6ºC/s
TC2
C100ºC
20ºC
TC3
P100ºC
20ºC
TC4
P100ºC
14:15
20ºC
Power
45%
Selected power
45%
14:15
TC5
P100ºC
20ºC
TC7
P100ºC
20ºC
TC8
P100ºC
20ºC
TC6
P100ºC
20ºC
TC5
P100ºC
14:15
20ºC
Power
45%
TC1
25ºC
Selected 120ºC
TC2
P100ºC
14:15
20ºC
Power
45%
TC1
25ºC
Selected 120ºC
TC2
P100ºC
14:15
20ºC
Power
45%
TC1
45ºC
Selected 120ºC
TC2
C100ºC
20ºC
TC3
P100ºC
20ºC
TC4
P100ºC
20ºC
TC5
P100ºC
20
5’ 8’
ºC
120 ºC
80 ºC
100 ºC
5’ 8’5’30”3’30” 8’
20 ºC
120 ºC
80 ºC
Lorem ipsum
TC1 TC2 TC3 TC4
ROBOT AUX. PEDAL
Hot
ZoneB
ZoneA
ZoneA
ZoneB
Hot
Hot
ZoneB
ZoneA
ZoneA
ZoneB
Hot
TC1 TC2 TC3 TC4
ROBOT AUX. PEDAL
detalle parte trasera
TC1 TC2 TC3 TC4
ROBOT AUX. PEDAL
Hot
ZoneB
ZoneA
ZoneA
ZoneB
Hot
Hot
ZoneB
Hot
ZoneB
ZoneA
ZoneA
Max. Rate
1.6ºC/s
Max. Rate
1.6ºC/s
Max. Rate
1.6ºC/s
Max. Rate
1.6ºC/s
Work mode
Mode
Time to stop
Thermocouples
Max Rate
Back
None
2min
Temp.
14:15
Work mode
Mode
Time to stop
Thermocouples
Max Rate
Back
None
2min
Temp.
1.6ºC/s
Max Rate
Min 0.1ºC/s Max 2.0ºC/s
Recommendations
The use of kapton tape is recomended to fix the end of the thermocouple
wire onto the PCB.
Place the control thermocouple as near as possible to the component
being soldered/reworked (1).
If there are any sensitive components, use a second thermocouple
(2) as protection.
Fixed with Kapton
Tape
(2) Protection
Thermocouple
(1) Control
Thermocouple
IPC does not recommend exceeding ramp-up rates over 3 - 4 °C /
sec (5 - 7 °F / sec) so as to reduce the risk of thermal stress on the
PCB.
3
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic
equipment at the end of its life must be collected and returned to an
authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage paid, to
the dealer where it was purchased.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
0028991-0322
Specifications
PH218
Thermocouple Type K
Ref.: PH218
- Temperature Rating: -70 to 250 ºC / -94 to 482 ºF
- Wire Isolation: PFA
- Wire Diameter: 2x Ø 0,2 mm / 2x Ø 0.008 in
- Wire Length: 1 m / 39.37 in
- Total Net Weight: 11.8 g / 0.026 lb
- Package Dimensions/Weight: 110 x 80 x 40 mm / 32.7 g
(L x W x H) 4.33 x 3.15 x 1.57 in / 0.072 lb
Complies with CE standards.
ESD safe.