jbc RHS User manual

RHS
Articulated Hand Rest
for PHSEK Preheater Set
INSTRUCTION MANUAL
www.jbctools.com

Articulated
Hand Rest Arm ................ 1 unit
Height Adj. Flange ......w. 1
unit
Ref. 0023991
Shaft .............................. 1 unit
Ref. 0024007
Base PHSE compatible ......................... 1 unit Headless Screw ....................................... 1 unit
Ref. 0017057
Allen key ..................................................... 1 unit
Ref. 0013609
Manual ......................................................... 1 unit
Ref. 0028766
Packing List
The following items are included:
This manual corresponds to the following reference:
RHS-A
2

R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
Articulated Hand
Rest Arm
Height Adjustment Flange
Shaft
Base
Hand Rest
Features
Headless Screw
Positioning Bolds
Printed Corner Guides
Assembly
ESD Connector
(connect to ESD
Common Grounding
Point)
Setting up the Articulated
Hand Rest
Fit the shaft into the base bushing
(1) and tighten the headless screw
(2). Then assemble first the height
adjustment flange (3) and finally the
hand rest arm (4) onto the shaft.
The hand rest arm position should
be as shown in the image. The right
hand rest ist marked at its bottom
side with the letter “R”.
Headless Screw
(at the back)
Shaft
Base
Bushing
Height
Adjustment
Flange
Hand Rest
Arm
Bottom View
Right Hand
Rest
1
2
3
4
3
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
Work Position Adjustment
RHN arm allows adjustment for different positions according to your work needs. The articulated
arm covers all work areas.
Position the arm and tighten the knobs.
The correct hand work posion ist shown in the following images:
Knob
Height Adjustment
According to your work needs the articulated
hand rest allows adjustment for different
heights through the vertical axis.
Slide the arm to the appropriate height (1) and
secure by tightening the knob (2) to guarantee
stability.
Arm
1
2
4

R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
Preheater Positioning
Positioning Caps
If a fixed preheater position
is not wanted the positioning
bolts can be removed
with a screwdriver.
Corner
Guides
1
2
1
Positioning Bolds
Note: For each preheater size there are different articulated hand rests with different base dimensions
available.
Preheater Articulated Hand Rest Base Dimension
PHNE RHN 310 x 239 mm / 12.20 x 9.41 in
PHSE RHS 410 x 270 mm / 16.14 x 10.63 in
PHBE RHB 550 x 480 mm / 21.65 x 18.90 in
RHS has been designed to work together with PHS
Fit PHSE onto the positioning bolts (1) for a proper alignment. The four corner guides (2) help to place
the heater unit in its position.
5
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
In case of using both left and right arms, assemble both as shown in the illustration according to the
letters on the back of the hand rest, to keep the hand supports at the same level. The right hand rest
should be assembled below the left hand rest.
Accessories*
If a second hand rest ist needed, Articulated Left Hand Rest HRL is available. HRL also allows
adjustment for different positions.
HRL
Articulated Left Hand Rest
HRL
Articulated Left Hand Rest
HRR
Articulated Right Hand Rest
Bottom View
Bottom View
Mark for left hand
rest
Mark for right hand
rest
* Not included, sold separately.
6

R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
HRR and HRL can be combined with:
RWT Adjustable Rework Arm,
RWS Adjustable Rework Arm for PHSE and
RWB Adjustable Rework Arm for PHBE.
Assemble first the height adjustment flange (1), then the HRR (2) and afterwards the HRL (3). Assemble
the second height adjustment flange (4) and finally the RWT (5).
Compatible JBC Articles*
* Not included, sold separately.
RWT
Ajustable Rework Arm
4 different sizes for PCB Supports are available:
- PHNS Support for PCBs up to 11x7 cm / 4x3”
- PHSS Support for PCBs up to 13x13 cm / 5x5”
- PHBS Support for PCBs up to 36x28 cm / 14x11”
- PHXLS Support for PCBs up to 51x61 cm / 20x24”
HRL
Articulated Left Hand Rest
HRR
Articulated Right Hand RestPlace the preheater set
in the area below the
hot air tool
Heights Adjustmet
Flange (1st)
Heights Adjustmet
Flange (2nd)
R
R
R
R
L
L
R
R
L
L
R
R
L
L
L
L
R
R
L
L
JTT
JTT
JTT
JTT
JTT
In case of using both left and right arms, assemble both as shown in the illustration according to the
letters on the back of the hand rest, to keep the hand supports at the same level. The right hand rest
should be assembled below the left hand rest.
Accessories*
If a second hand rest ist needed, Articulated Left Hand Rest HRL is available. HRL also allows
adjustment for different positions.
HRL
Articulated Left Hand Rest
HRL
Articulated Left Hand Rest
HRR
Articulated Right Hand Rest
Bottom View
Bottom View
Mark for left hand
rest
Mark for right hand
rest
* Not included, sold separately.
7
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

Sliding Parts
Maintenance
- Check periodically that RHS is clean,
especially the sliding parts and the shaft.
- Use a damp cloth when cleaning. Alcohol
can only be used to clean the metal parts.
- Replace any defective damaged parts.
Use original JBC spare parts only.
Safety
- Do not use the equipment for any purpose other than PCB rework.
- The temperature of accessible surfaces may remain high after the unit is turned off. Handle with care.
- Be careful with the fumes produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- Not leave up the arms directly above heat surfaces.
- Utmost care must be taken with liquid tin waste which can cause burns.
- This appliance can be used by children over the age of eight as well as persons with reduced physical,
sensory or mental capabilities or lacking experience provided that they have been given adequate
supervision or instruction concerning use of the appliance and understand the hazards involved.
Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
It is imperative to follow safety guidelines to prevent electric shock, injury,
fire or explosions.
Shaft
Do not leave HRR over the
preheater when the preheater
is working.
8

Notes
9
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

Notes
10

Notes
Notes
11
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
0028766-071122
Specifications
RHS
Articulated Hand Rest for PHSEK Preheater Set
Ref.: RHS-A
- Base Dimensions: 270 x 410 mm / 10.6 x 16.2 in
- Total Height: 205 mm / 8.07 in
- Arm Height: 200 mm / 7.87 in
- Arm Lenght: 498 mm / 19.61 in
- ESD Connector
- Total Net Weight: 6.03 kg / 13.29 lb
- Package Dimension / Weight: 474 x 368 x 195 mm / 7.14 kg
(L x W x H) 18.66 x 14.49 x 7.68 / 15.73 lb
Complies with CE standards
ESD Safe