jbc S3-B User manual

www.jbctools.com
English
Quick Tip Changer
Ref. S3-B

2 3
www.jbctools.com
Changing the S3-B
Do not pull
the cable
Recommendations
When you place
the new S3-B make
sure the cable fits
snugly and is not
pinched for a proper
connection.
Make sure that
the rubber does
not prevent proper
assembly of the walls.
1. Loosen the
screws and slide
out (max. 3mm)
the sidewalls
from the stand.
2. Remove the
screw and place the
new S3-B following
the same steps
conversely.
Ø 2-3 mm

www.jbctools.com
Warranty
JBC’s 2 year warranty covers this device
against all manufacturing defects,
including the replacement of defective
parts and labour.
Warranty does not cover product wear
due to use or mis-use.
In order for the warranty to be valid,
equipment must be returned, postage
paid, to the dealer where it was
purchased.
0014684-0714
This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC,
electronic equipment at the end of their life must be
collected and returned to an authorized recycling facility.