jbc SC-C User manual

Extractor-Inserter
Cartridge Stand
Ref. SC-C
INSTRUCTION MANUAL
www.jbctools.com

ø0,3
2,3x0,7
ø0,7
ø1
ø 1
2 x 0,8
ø 1,5
3,5
AAB
Manual .................................................. 1 unit
Ref. 0021043
Extractor-Inserter
Cartridge Stand ............................. 1 unit
Ref. SC-C
Packing List
Features
The JBC Cartridge Stand holds up to 12
models of C210 and C245 cartridges.
Moreover the SC-C has two different positions:
(1) The internal position for C210 cartridges.
(2) The external position for C245 cartridges,
as the image below.
Find the ones that best suit your soldering
needs at: www.jbctools.com
Extractor-Inserter
Cartridge Stand
Ref. SC-C
www.jbctools.com
Round Chisel Bevel
C210 Cartridges
Round Chisel
Round
bent Bevel
Special
models
C245 Cartridges
Round
bent
1
2
INSTRUCTION MANUAL
2

Changing cartridges
Save time and change cartridges without switching off the station.
Inserting
To insert the cartridges, push the handle
into the cartridge as the image.
Removing
Place the cartridge in the slot and pull the
handle to remove it.
Aligning
Use the appropriate hole to push the
cartridge into the handle as far as the mark*.
Also can be used to rotate the cartridges
(for C245 or C210) for a proper aligment.
Mark
*Important
It is essential to insert the cartridges as far as the mark for a proper connection.
www.jbctools.com
3

This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life
must be collected and returned to an authorized recycling facility.
Manual in other languages available on our website
Warranty
JBC’s two-year warranty covers this equipment
against all manufacturing defects, including the
replacement of defective parts and labour. Warranty
does not cover product wear or misuse. In order for
the warranty to be valid, equipment must be returned,
postage paid, to the dealer where it was purchased.
Register your warranty within 30 days of purchase
in www.jbctools.com/productregistration
www.jbctools.com
- Net Weight: 4.2 kg (9.3 lb)
- Dimensions: 210 x 140 x 110 mm
Complies with CE standards
ESD protected
Specifications
0021043-0718