jbc US 1000 User manual

Stands
www.jbctools.com
INSTRUCTION MANUAL

Stand models
US 1000 Spare part
Spare part Spare part
Spare partLS 1100
UD 1500 TS 1200
Adaptable to:
30ST, 40ST, 65ST, SL 2020
Adaptable to:
14ST
Adaptable to:
DST
Adaptable to:
55N
Ref. 0290100 Ref. 0297400
Ref. 0297410 Ref. 0297430
Ref. 0297420Ref. 0290110
Ref. 0290150 Ref. 0290120
2

www.jbctools.com
To clean the tips, use the sponge included with the stand and check it is
slightly moisted.
Only deionised water (car battery water) should be used in order to wet
the sponge. If normal water was to be used, it is very likely that the tip will
become dirty due to the salts dissolved within the water.
To re-tin the soldering tips, we recommend using the tip tinner/cleaner ref.
TT-A.
Tip care
Accessories
Sponge
Ref. S6169 Ref. 0297705
Wire brush
3

This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic
equipment at the end of its life must be collected and returned to an
authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage paid, to
the dealer where it was purchased.
www.jbctools.com
0295430-0420