jbc PHS User manual

PHS Table Support
Ref. PHS-STA
www.jbctools.com

Packing List
The following items should be included:
Use the PHS Table Support to place the preheater on your workbench and do not occupy space.
Features
PHS Table Support ......................................1 unit
Ref. PHS-STA
Workbench cover
for PHS support ........................................ 1 unit
Ref. 0019592
Screws .......................... 6 units
Ref. 0019681
Manual ............................ 1 unit
Ref. 0019676
Small workbench cover
for PHS support ................ 1u
Ref. 0019537
PHS Table Support
Ref. PHS-STA
Console Heater unit
2
www.jbctools.com

Cover and protect the work space according to your work needs.
Make a hole in your work table according to the figure below. Fix the PHS table support on your
workbench with the supplied screws.
1Protect your work space except of the
heating area with the workbench cover
(Ref. 0019592).
2 If you work with a preheater support
(Ref. PHS-SA) protect the work space with
the small workbench cover (Ref. 0019592).
Options
Assembly
www.jbctools.com
3

This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life
must be collected and returned to an authorized recycling facility.
Manual in other languages available on our website
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour. Warranty does not cover
product wear or misuse. In order for the warranty to
be valid, equipment must be returned, postage paid,
to the dealer where it was purchased. Please register
your warranty within 30 days of purchase in
www.jbctools.com/productregistration.
Specifications
- Weight: 2kg (4.41 lb)
- Dimensions: 302 x 602 mm (11.89 x 23.70 in)
Complies with CE standards.
ESD protected.
0019676-0118
www.jbctools.comwww.jbctools.com