
PRECISION SOUNDS.
JPLAY
UL. RYMARSKA 45/1
53-206 WROCŁAW, POLAND
WWW.JCAT.EU
SUPPORT@JCAT.EU
VAT ID: PL7931476613
IBAN: PL04 2490 0005 0000 4600 8968 8591 (EUR)
SWIFT: ALBPPLPW
2. Please check power requirements of your
devices and make sure that the devices accept
the PSU’s output! The PSU’s mains and output
voltage can be found on the back of the PSU.
3. Connect one end of the DC cable to the power
supply and the other end to the component.
Make sure the connectors lock in their place
securely. DO NOT use excessive force to attach
the connectors. Make sure that the connectors
lock in tightly and securely.
3. The PSU must be connected to an AC socket
with ground connection (PE). Plug in the AC
power cord to the power supply. The power
supply will switch on automatically and the
orange LED on the front panel will light up.
There is no power switch in the power supply
unit – if you need to turn the PSU off, please
disconnect the AC power cord.
V. Troubleshooting
If the power supply unit fails to function
properly, please go through the below
checklist:
1. Check to make sure the AC power cord is
properly connected to the AC source and the
power supply unit.
2. Check to make sure the AC source is On.
3. Check and secure both PSU DC and DC plug
devices connectors.