JetBeam PC20 User manual

PC20
User Manual
ANSI
Lumens
CREE XM-L LED
Reverse Polarity Protection
Anti-roll Ring
HA III Military Grade Hard Anodized
Tactical Forward Clicky
Aero Grade Aluminum Alloy

Thanks for choosing JETBeam Flashlight. Please
read the user manual carefully before using your
light.
Features
Premium CREE XM-L T6 LED
Maximum output of 410 lumens
Maximum runtime of up to 65 hours
Special designed user interface for tactical
applications
Rapidly switch between Tactical mode and
User-dened mode
User-defined mode allows for customized
brightness levels and a multitude of functions
Anti-roll design
Newly designed high efciency broad voltage
drive circuit
Reverse polarity protection
Equips removable stainless steel tactical clip
Lightweight design, weighing only 61g
(without battery)
IPX-8 standard waterproof (two meters)
Specications
LED: CREE XM-L T6
Max output: 410 lumens
Reector: Aluminum reector
Lens: Toughened ultra-clear mineral
glass with anti-reective coating

Material: Aero grade aluminum alloy
Finish: HA III Military grade hard anodized
Battery: 2xCR123(RCR123) batteries
Switch: Forward clicky
Waterproof: IPX-8 standard waterproof
Dimensions: Tube diameter 22.5mm
Total length 128mm
Weight: 61g (without battery)
Accessories: Lanyard, spare rubber tailcap
switch cover, spare O-ring and
holster
LUMENS
6 h 2 h
130
3700cd (Peak Beam Intensity)
121m (Beam Distance)
IPX-8, 2m (Waterproof AND Submersible)
1.5m (Impact Resistant)
HIGH
LUMENS
410
MID LOW LOWER LOW
LUMENS
16 h
45
LUMENS
65 h
6
Stated data has been measured by:
Two 3V SYSMAX CR123 batteries
Tip: Stated data has been measured according to the
international flashlight testing standards ANSI/NEMA
FL1 by using quality two SYSMAX CR123(3V) batteries
in the laboratory. The data may vary due to different
battery usage and environment conditions.

Operation Instructions:
Battery installation
1. Unscrew the tailcap in counter-clockwise
direction.
2. Insert two CR123/RCR123 batteries with the
positive pole of the battery pointing to the
light head.
3. Screw the tailcap back on the flashlight
tightly.Tactical lighting/Momentary mode
Lightly press the button at the tailcap. The
flashlight is turned on; Release the button at
the tailcap.The ashlight is turned off.
WARNING
Insert batteries with the positive (+) end pointing
to the head. The PC20 will not work when
incorrectly insert the batteries.

ON/OFF Switching:
Switch ON: Press the button at the tailcap until
tailcap “click” on.
Switch OFF: Press the button at the tailcap until a
second “click” is heard. Light is now off.
Mode switching
Users can select Tactical mode and User-dened
mode smoothly. To access Tactical mode, simply
tighten the head.
Alternatively, loosen the head to access User-
dened mode. In User-dened mode, users can
choose customized brightness levels and a
multitude of functions.
Tactical mode
Tightening the head, the PC20 access Tactical
mode, emitting a continuous maximum output
of 410 lumens. In this mode, the flashlight has
tactical lighting function.
Lightly press the button at the tailcap. The
ashlight is turned on. Release the button to turn
it off. Moreover, the output will not be changed
even in long term use.
User-dened mode
Slightly loosening the flashlight head, the PC20
access User-defined mode. In this mode, lightly
press the switch rapidly to choose brightness
and functions from “Mid-Low-Lower low-Strobe-

SOS” circularly. Press the switch all the way down
when reach to a desired mode. User-defined
mode has memory function. It will memorize
the brightness/Strobe automatically each time
when you turn off the light.
Maintenance
Every 6 months , the threads should be wiped
with a clean cloth followed by a thin coating of
silicon-based lubricant.
NOTE: DO NOT use petroleum-based lubricants as they may
damage the O-rings and void the product warranty.
Warranty Service
All JETBeam products enjoy a warranty service
after sale. Any malfunctioning products can
be exchanged for replacements from local
distributor/dealer within the first 14 days after
receipt of the light. This product can enjoy free
warranty service within 18 months from the date
of purchase.After 18 months, the warranty covers
labor cost and maintenance, with the exclusion
on the cost of accessories or repair parts.
The warranty is nullified in any of the following
situations:
1. The product(s) is/are broken down,
reconstructed and/or modified under
unauthorized conditions.

2. The product(s) is/are damaged through
improper use.
3. The product(s) is/are damaged by leakage
of batteries.
Details of warranty service, please contact
regional distributor/dealer or send an email to
[email protected]
SYSMAX Industry Co.,Ltd.
Rm 1407-08, Glorious Tower,
850 Dongfeng Road East,Yuexiu District,
Guangzhou, Guangdong, China 510600
Tel: [phone]
Fax: [phone]
E-mail: inf[email protected]

www.JET-Beam.com