Jetson Plasma X User manual

Designed in Brooklyn | Made in China
Plasma X
Lava Tech Hoverboard.
A guide for your ride.
IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE.
MODELS: JPLSMX-BLK | JPLSMX-IRS | JPLSMX-OS-BLK | JPLSMX-OS-IRS

Jetson's top two riding rules:
Be safe. Have fun!

3
Table of Contents
Safety Warnings
Plasma X Overview
Specs & Features
Charging the Battery
Indicator Lights
Battery Levels
Changing the Lighting
Powering On and O
How to Recalibrate
Riding the Hoverboard
Connecting to Bluetooth®
Helmet Safety
Care & Maintenance
...............................................................................................................4
................................................................................................................6
.............................................................................................................9
.........................................................................................................10
...............................................................................................................11
................................................................................................................12
.......................................................................................................12
........................................................................................................12
..........................................................................................................13
.....................................................................................................14
..................................................................................................17
................................................................................................................18
........................................................................................................19

4
Safety Warnings
• Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety
instructions. The user will be responsible for any loss or damage caused by improper use.
• Before each cycle of operation, the operator shall perform the preoperation checks speciied by the manufacturer: That all guards and
pads originally supplied by the manufacturer are in proper place and in serviceable condition; That the braking system is functioning
properly; That any and all axle guards, chain guards, or other covers or guards supplied by the manufacturer are in place and in
serviceable condition; That tires are in good condition, inlated properly, and have suicient tread remaining; The area that the product is
to be operated should be safe and suitable for safe operation.
• Components shall be maintained and repaired in accordance with the manufacturer’s speciications and using only the manufacturer’s
authorized replacement parts with installation performed by dealers or other skilled persons.
• Warning against recharging non-rechargeable batteries.
• Don’t allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with moving parts, wheels, or drive train, while the
motor is running.
• This product should not be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction (IEC 60335-1/A2:2006).
• Unsupervised children should not play with the product (IEC 60335-1/A2:2006).
• Adult supervision is required.
• The rider should not exceed 220 lb.
• Units shall not be operated to perform racing, stunt riding, or other maneuvers, which may cause loss of control, or may cause
uncontrolled operator/passenger actions or reactions.
• Never use near motor vehicles.
• Avoid sharp bumps, drainage grates, and sudden surface changes. Scooter may suddenly stop.
• Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris. Wet weather impairs traction, braking, and visibility.
• Avoid riding around lammable gas, steam, liquid, or dust that could cause ire.
• Operators shall adhere to all of the manufacturer’s recommendations and instructions, as well as comply with all laws and ordinances:
Units without headlights shall be operated only with adequate daylight conditions of visibility, and; Owners shall be encouraged to
highlight (for conspicuity) using lighting, relectors, and for low-riding units, signal lags on lexible poles.
• Persons with the following conditions shall be cautioned not to operate: Those with heart conditions; Pregnant women; Persons with head,
back, or neck ailments, or prior surgeries to those areas of the body; and persons with any mental or physical conditions that may make
them susceptible to injury or impair their physical dexterity or mental capabilities to recognize, understand, and perform all of the safety
instructions and to be able to assume the hazards inherent in unit use.
• Do not ride at night.
• Do not ride after drinking or taking prescription medication.
• Do not carry items when riding.
• Never operate the product barefooted.
• Always wear shoes and keep shoelaces tied.
• Make sure your feet are always placed securely on the deck.
• Operators always shall use appropriate protective clothing, including but not limited to a helmet, with appropriate certiication, and any
other equipment recommended by the manufacturer: Always wear protective equipment such as helmet, knee pads, and elbow pads.
• Always give way to pedestrians.
• Be alert to things in front and far away from you.
• Do not allow distractions when riding, such as answering the phone or engaging in any other activities.
• The product cannot be ridden by more than one person.
• When you ride the product along with other riders, always keep a safe distance to avoid a collision.
• When turning, be sure to maintain your balance.
• Riding with improperly adjusted brakes is dangerous and can result in serious injury or death.
• The brake may become hot while operating, do not touch the brake with your bare skin.

5
• Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden or excessive
application of the brake may result in injury or death.
• If the brake loosens, please adjust with the hexagon wrench, or please contact the Jetson Care Team.
• Replace worn or broken parts immediately.
• Check whether all safety labels are in place and understood before riding.
• The owner shall allow the use and operation of the unit after a demonstration that such operators can understand and operate all
components of the unit before use.
• Do not ride without proper training. Do not ride at high speeds, on uneven terrain, or on slopes. Do not perform stunts or turn abruptly.
• Recommended for indoor use.
• Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials, store indoors when not in use.
California Proposition 65
WARNING:
This product can expose you to a chemical such as Cadmium that is known to the state of California to cause cancer or birth
defects or other reproductive harm. For more information go to www.p65warnings.ca.gov/product
MODIFICATIONS
Do not attempt to disassemble, modify, repair, or replace the unit or any components of the unit without instruction from the Jetson Care
Team. This will void any warranty, and can lead to malfunctions which may cause injury.
ADDITIONAL OPERATION PRECAUTIONS
Do not lift the product o the ground while it is on and the wheels are in motion. This can result in freely spinning wheels, which may cause
injury to yourself or others nearby. Do not jump on or o the product, and do not jump while using it. Always keep your feet firmly planted
on the foot rest while in operation. Always check the battery charge before using.
NOTICE OF COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation. Warning: Changes or modiications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
DISPOSAL OF USED BATTERY
Battery may contain hazardous substances which could endanger the environment and human health. This symbol marked on the
battery and/or packaging indicates that used battery shall not be treated as municipal waste. Batteries should be disposed of at
an appropriate collection point for recycling. By ensuring the used batteries are disposed of correctly, you will help preventing potential
negative consequences for the environment and human health. The recycling of materials will help to conserve natural resources. For more
information about recycling of used batteries, please contact your local municipality waste disposal service.

6
Plasma X Overview
* ADULTS MUST ASSIST CHILDREN IN THE INITIAL ADJUSTMENT PROCEDURES OF THE PRODUCT.
1. CHARGING PORT
2. POWER BUTTON
3. CHARGER

7
123
FRONT VIEW
REAR VIEW
PLEASE NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.

9
Specs & Features
• MAX SPEED: 10 MPH
• MAX RANGE: 10 MILES
• BATTERY: 36V, 2.0AH LITHIUMION
• CLIMBING ANGLE: UP TO 10°
• PRODUCT WEIGHT: 12.6 LB
• TIRE SIZE: 6.5”
• PRODUCT DIMENSIONS: L23.5” ×W 7.5” ×H6.8”
• CHARGER: UL LISTED, 100240V
• BLUETOOTH®VERSION: 5.0
• BLUETOOTH®RANGE: 32.8 FT  10 M
• CHARGE TIME: UP TO 5 HOURS
• RECOMMENDED AGE: 12+
• WEIGHT LIMIT: 220 LB

10
1.1 Charging the Battery
• ONLY USE THE INCLUDED CHARGER.
• PLUG THE CHARGER INTO THE WALL OUTLET BEFORE PLUGGING INTO THE CHARGING PORT.
• NEVER TURN ON THE PLASMA X WHILE IT IS CHARGING.
• CHARGE THE BATTERY UNTIL IT IS FULLY CHARGED  UP TO 5 HOURS.
• NEVER LEAVE THE PLASMA X CHARGING OVERNIGHT.
1. Getting Started
 CHARGING
 CHARGE COMPLETE
CHARGER INDICATOR LIGHT:
INDICATOR LIGHT

11
1.2 Indicator Lights
MUST CHARGE HOVERBOARD FOR 5 HOURS TO REACH 100% BATTERY CHARGE.
STATUS LIGHTS
BATTERY INDICATOR LIGHTS
YOUR PLASMA X IS ALL SET. RECALIBRATE YOUR PLASMA X.STATUS
STATUS LIGHTS
BATTERY
INDICATOR LIGHTS

12
1.3 Battery Levels
WHEN THE HOVERBOARD BATTERY CHARGE NEARS DEPLETION, THE HOVERBOARD WILL ALERT YOU AS FOLLOWS:
• BELOW 9% CHARGE  ONLY ONE BATTERY INDICATOR LIGHT WILL ILLUMINATE, AND IT WILL BLINK
CONTINUOUSLY. THE HOVERBOARD WILL ALSO VOICE "LOW BATTERY; PLEASE CHARGE" ONCE.
• BELOW 4% CHARGE  ONLY ONE BATTERY INDICATOR LIGHT WILL ILLUMINATE, AND IT WILL BLINK
CONTINUOUSLY. THE HOVERBOARD WILL ALSO VOICE "LOW BATTERY; PLEASE CHARGE" TWICE AND MAKE A
CONTINUOUS BEEPING SOUND.
1.4 Changing the Lighting
• THE DEFAULT LIGHTING MODE WILL DISPLAY WHEN THE PLASMA X IS POWERED ON.
• SHORTPRESS THE POWER BUTTON TO SWITCH BETWEEN DIFFERENT LIGHTING EFFECTS.
1.5 Powering On and O
TO POWER THE HOVERBOARD ON OR OFF, LONGPRESS THE POWER BUTTON.
POWER BUTTON

13
1.6 How to Recalibrate
HOLD POWER BUTTON
FOR 5 SECONDS
FOLLOW THESE 4 SIMPLE STEPS:
1. POWER OFF THE PLASMA X AND PLACE IT ON A FLAT SURFACE.
ROTATE THE FOOT PADS SO THAT THEY ARE PARALLEL TO THE GROUND AND ALIGNED WITH EACH OTHER.
2. PRESS THE POWER BUTTON IN FOR 5 SECONDS. YOU WILL HEAR A SHORT MUSICAL TUNE.
3. WHEN THE TUNE IS COMPLETE, RELEASE THE POWER BUTTON AND THEN PRESS IT AGAIN TO POWER THE PLASMA X OFF.
4. TURN PLASMA X BACK ON; RECALIBRATION IS NOW COMPLETE.
* KEEP THE HOVERBOARD LEVELED AND STILL THROUGHOUT THE RECALIBRATION PR0CESS.
* WHILE RECALIBRATING, DO NOT LEAN ON OR PUT ANY WEIGHT ON THE HOVERBOARD.
* IT CAN TAKE UP TO 3 RECALIBRATION ATTEMPTS TO ACHIEVE PROPER INTERNAL ALIGNMENT.
YOUR HOVERBOARD'S INTERNAL BALANCE MECHANISMS SOMETIMES NEED TO BE RESET, OR "RECALIBRATED."

14
2.1 Riding the Hoverboard
2. Make Moves
TO RIDE STRAIGHT FORWARD, APPLY EQUAL PRESSURE TO THE FRONT OF EACH FOOT PAD.
TO RIDE BACKWARDS, APPLY EQUAL PRESSURE TO THE BACK OF EACH FOOT PAD.

15
TO TURN LEFT, ROTATE YOUR HIPS SLIGHTLY TO THE LEFT, WHICH WILL ADJUST THE
DISTRIBUTION OF PRESSURE ON THE FOOTPADS AND MOVE THE RIGHT WHEEL AROUND
FASTER THAN THE LEFT, AFFECTING A LEFT TURN.

16
TO TURN RIGHT, ROTATE YOUR HIPS SLIGHTLY TO THE RIGHT, WHICH WILL ADJUST THE
DISTRIBUTION OF PRESSURE ON THE FOOTPADS AND MOVE THE LEFT WHEEL AROUND
FASTER THAN THE RIGHT, AFFECTING A RIGHT TURN.

17
2.2 Connecting to Bluetooth®
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, inc. And any use of such marks by
Jetson Electric Bike LLC. is under license. Other trademarks and trade names are those of their respective owners.
THE HOVERBOARD COMES EQUIPPED WITH A BLUETOOTH® SPEAKER.
TO CONNECT TO YOUR BLUETOOTH® SPEAKER:
• TURN ON THE PLASMA X, AND IT WILL BECOME DISCOVERABLE TO YOUR HANDHELD DEVICE.
• ACTIVATE YOUR BLUETOOTH® IN YOUR HANDHELD DEVICE’S SETTINGS.
• FIND THE PLASMA X IN YOUR HANDHELD DEVICE’S LIST AND SELECT IT.
• NOW YOU CAN STREAM YOUR MUSIC THROUGH THE HOVERBOARD'S SPEAKER.
IF YOU ARE HAVING ISSUES CONNECTING TO BLUETOOTH®, FOLLOW THESE STEPS:
1. TRY RESTARTING THE PLASMA X BY TURNING IT OFF AND THEN ON.
2. TAP THE SCAN BUTTON ON YOUR DEVICE TO REFRESH.
3. CONTACT THE JETSON CARE TEAM FOR ASSISTANCE.

2.3 Helmet Safety
IMPROPER POSITIONING:
THE FOREHEAD IS EXPOSED.
A FALL COULD RESULT IN SERIOUS INJURY.
PROPER POSITIONING:
THE FOREHEAD IS COVERED
BY THE HELMET.
* WEAR A HELMET, APPROPRIATE CLOTHING, SHOES, AND SAFETY GEAR. AVOID CLOTHING THAT CAN GET CAUGHT INTO
OR UNDER THE WHEELS. CLOSEDTOE, FLAT SHOES ARE RECOMMENDED. WEAR AN ASTM F1492 APPROVED HELMET AND
PROTECTIVE GEAR TO PREVENT INJURY IN THE EVENT OF AN ACCIDENT.
18