Jiajia BMW S1000RR RIDE-ON Datasheet

BMW S1000RR RIDE-ON
Owner’s Manual
with Assembly Instructions
Styles and colours may vary.
Made in China.
The owner’s manual contains important safety information as well as assembly, use and
maintenance instructions.
The Ride-on Car must be assembled by an adult who has read and understands the
instructions in this manual.
Keep the package away from children and dispose of properly before use.
Keep this manual for future reference.

On the purchase of your new Ride-On.
This ride-on car will provide your child with many miles of riding of enjoyment.
To help assure you and your rider a safe ride we ask you to please read this
manual carefully, and keep it for future reference.
Follow the recommendations in this manual, they are designed to improve the
safety and operation of your ride-on car and rider.
Battery
Fuse
Charger
12V7Ah x 1
5A & 13A
12V1000mA
Suitable age:
Load Capacity:
Speed:
Size of car:
Power way:
Charge time:
37~96 Months
Under 30 kgs
2.5~5km/h
110 x 47 x 69 CM
Charging type
8 ~ 12 hours
About Your New Ride-On │1
VER: SMS-JT528-EN-141201
BMW S1000RR Children Electric Motorcycle manufactured by Zhejiang
Jiajia Ride-On Co., Ltd.
(Add: Xincang Industrial Zone, Pinghu City, Zhejiang Province,
P.R.China). The BMW logo and the BMW word mark are trademarks of
BMW AG and are used under license.

1
2
3
4
5
6
7
8
1
1
2
1
2
1
2
1
5
2
7
6
3
1
4
8
PART
NO.
REMARKS
PART NAME
Q’ty (pcs)
Vehicle body
View mirror
Spanner
Charger
Ø4x12 screw
Bolt
*Side wheel
Ø10 locknut
One pair
NOTE: Some parts shown are assembled on both sides of vehicle
Parts List │2

FOR THE SAFETY OF YOUR CHILD, PLEASE READ ALL WARNINGS AND
ASSEMBLY/USE INSTRUCTIONS. KEEP THIS GUIDE FOR FUTURE REFERENCE.
• ADULT ASSEMBLY REQUIRED. The product contains small parts, which are for
adult assembly only. Keep children away when assembling.
• Always remove protective material and poly bags and dispose before assembly.
Before You Begin Assembly │4
WARNING!
FOR THE SAFETY OF YOUR CHILD, PLEASE READ ALL WARNINGS AND
ASSEMBLY/USE INSTRUCTIONS. KEEP THIS GUIDE FOR FUTURE REFERENCE.
• ADULT ASSEMBLY REQUIRED. The product contains small parts, which are for
adult assembly only. Keep children away when assembling.
• Always remove protective material and poly bags and dispose before assembly.
• Make sure that the power switch is turned “OFF” before assembling the ride-
on.
• Before first time use, charge the battery for at least 4 to 6 hours.
• Assembly tools required:
WARNING!
Screwdriver
(not included)
Spanner

1
2
34
Attach the Side Wheel │5
1. Fit the side wheel to the vehicle body from the left side.
2. Insert the bolt into the hole in the side wheel support, and through the
vehicle body.
3. Fit the other side wheel onto the bolt.
4. Tighten a Ø10 locknut to the end of the bolt with a spanner.
HINT: An extra spanner has been provided to hold the bolt on the other
side while tightening the lock nut on the other side.
HINT: The kickstand was factory assemblyed
already. If you want to use side wheel,
Remove the kickstand please.
Kickstand,
factory done!

1
2
3
Attach the View Mirror │6
1. Fit the View mirror to the facuguard,
2. Tighten a screw to secure it with a screwdriver.
3. Repeat for the other side.

1
2
3
Connect the Power Supply │7
Fuse box
1&2. Turn the Lock on the top of seat and remove the seat.
3. Plug the Red fuse connector into the terminal on battery.
Lock

3
1
2
●DO NOT mix old and new batteries.
●DO NOT mix alkaline, standard (carbon-zinc) or rechargeable batteries.
●DO NOT charge non-rechargeable batteries. Always have adult supervision when charging rechargeable batteries.
Insert the Batteries for Sound Effects
If you wish to use the sound effects, install two AA batteries (non provided) using the
following steps:
Attach the Batteries of Handle bar │8
1. With a small screwdriver remove the screw on the battery cover located in the center of
handle bar
2. Remove the battery cover from the top of the battery compartment.
3. Insert two AA batteries in their correct polarities.
4. Replace the battery cover over the battery compartment and fasten with the screw you
removed in step one.

PREVENT INJURIES AND DEATHS:
• NEVER LEAVE CHILD UNATTENDED. ADULT DIRECT SUPERVISION IS REQUIRED.
Always keep child in view when child is in vehicle.
• This toy should be used with caution since skill is required to avoid falls or
collisions causing injury to the user or third parties.
• Protective equipment should be worn.
• Never use in roadways, near cars, on or near steep inclines or steps,
swimming pools or other bodies of water.
• Always wear shoes.
• Always sit on the seat.
• Not to be used in traffic.
• This toy is unsuitable for children under 37 months due to its maximum
speed; Maximum user weight is 30 kgs.
• This toy has no brake.
Rules for Safe Riding
• Important! Before using the vehicle for the first time, the battery needs to be charged for 4 to
6 hours, no more than 10 hours. Only an adult can charge and recharge the battery.
• Check all the screws, cap nuts and protective coverings regularly and tighten as required.
Must confirm before using that following work which is already finished:
• Keep Children within Safe Riding Areas:
- Never use in roadway, near motor vehicles, on lawn space, on or near steep inclines or steps,
swimming pools or other bodies of water;
• Use the toy only on flat surfaces. Such as inside your house, garden or playground.
• Never use in the dark. A child could encounter unexpected obstacles and have an accident.
Operate the vehicle only in the daytime or a well-lit area.
• It is prohibited to change the circuit or add other electric parts
• Inspect wires and connections of the vehicle periodically.
• Do not let any child touch the wheels or be near them when the car is moving .
WARNING!
Use the vehicle on generally level ground ONLY! DO NOT Use the vehicle on Lawn space!
Safety │9

1
2
3
4
Make sure your child knows how to steer, how to start and stop the vehicle and knows the rules for safe
driving. The vehicle can be driven at a maximum of 3~5 km/h.
ADVANCED USE - High speed Drive
1. Power Switch: Turns the vehicle on and off.
2. High/Low speed switch: The switch operates the vehicle to move in low or high
speed.
3. Sounds buttons: Press for sounds playing.
4. Foot pedal: Applies power (speed) to the vehicle.
Use Your Ride-on │10

ONLY AN ADULT CAN CHARGE AND RECHARGE THE BATTERY!
• PREVENT FIRE AND ELECTRIC SHOCK:
- Use the only rechargeable battery and charger supplied with your vehicle. NEVER substitute the battery
or the charger with another brand. Using another battery or charger may cause a fire or explosion.
- Do not use the battery or charger for any other product. Overheating, fire or explosion could occur.
- NEVER modify the electric circuit system. Tampering with the electric system may cause a shock, fire or
explosion or may permanently damage the system.
- Do not allow direct contact between battery terminals. Fire or explosion can occur.
- Do not allow any type of liquid on the battery or its components.
- Explosive gasses are created during charging. Do not charge near heat or flammable materials. Charge
the battery in a well-ventilated area ONLY.
- NEVER pick up the battery by the wires or charger. Damage can occur to the battery and may cause a
fire. Pick up the battery by the case ONLY.
- Charge the battery in a dry area ONLY.
• Battery posts, terminals and related accessories contain lead and lead compounds, chemicals
known to the State of California to cause cancer and reproductive harm. Wash hands after
handling.
• Do not open the battery. Battery contains lead acid and other materials that are toxic and
corrosive.
• Do not open the charger. Exposed wiring and circuitry inside case may cause electric shock.•
Only adults may handle or charge the battery. NEVER allow child to handle or charge the
battery. Battery is heavy and contains lead acid (electrolyte).
• Do not drop the battery. Permanent damage to the battery could occur or cause serious injury.
• Before charging the battery, check for wear or damage to the battery, charger, its supply cord
and the connectors. DO NOT charge the battery if any damage to parts has occurred.
• Do not allow the battery to drain completely. Recharge the battery after each use or once a
month if not used regularly.
• Do not charge battery upside down.
• Always secure the battery with the bracket. Battery can fall out and injure a child if vehicle tips
over.
WARNING!
• The charging input socket is above the foot pedal.
• The POWER SWITCH must be turned in OFF position when charging.
• Before the first use, you should charge the battery for 4-6 hours. Do not recharge
the battery for more than 10 hours to avoid overheating the charger.
• When the vehicle begins to run slowly, recharge the battery.
• After each use or once a month minimum recharge time as 8 to 12 hours, less than
20 hours at most.
Charging │11

2
1
WARNING!
This product has CHARGING PROTECTION: When charging, all the functions will be cut off!
Charging │12
1. Plug the charger port into the input socket. (the socket is above the foot pedal)
2. Plug the charger plug into a wall outlet. The battery will begin charging.

The battery features a thermal fuse with a rest fuse that will automatically trip and cut all power
to the vehicle if the motor, electric system or battery is overloaded. The fuse will reset and
power will be restored after the unit is turned OFF for five Minutes and then turned ON again. If
the thermal fuse trips repeatedly during normal use, the vehicle may need repair. Contact
your distributor please.
To avoid losing power, follow these guidelines:
●Do not overload the vehicle.
●Do not tow anything behind the vehicle.
●Do not drive up steep slopes.
●Do not drive into fixed objects, which may cause the wheels to spin, causing the motor to
overheat.
●Do not drive in very hot weather, components may overheat.
●Do not allow water or other liquids to come in contact with the battery or other electric
components.
●Do not tamper with the electric system. Doing so may create a short, causing the fuse to
trip.
Battery Replacement and Disposal
The battery will eventually lose the ability to hold a charge. Depending on the amount of use,
and varying conditions, the battery should operate for one to three years. Follow these steps to
replace and dispose the battery:
1. Remove the seat.
2. Disconnect the battery connectors.
3. Remove the battery bracket.
4. Carefully lift the battery.
●Depending on the condition of the battery (i.e.: leakage) you may want to wear protective
gloves before removal.
●Do not lift the battery by its connectors or cables.
5. Place the dead battery in a plastic bag.
Important! Recycle the dead battery responsibly. The battery contains lead acid (electrolyte)
and must be disposed of properly and legally. It is illegal in most areas to incinerate lead acid
batteries or dispose of them in landfills. Take it to a federal or state-approved lead acid
battery recycler, such as local automotive battery retailer.
Do not throw the battery away with your regular household waste!
6. Replace the battery and reconnect the connectors.
7. Replace the metal battery bracket.
8. Replace the seat.
Battery Replacement & Fuse │13

.
Problem Possible Cause Solution
Vehicle dose not run
Vehicle dose not run
very long
Vehicle runs sluggishly
Vehicle needs a push
to go forward
Difficult shifting from
forward to reverse or
vice-versa
Loud grinding or clicking
noises coming from
motor or gear box
Battery low on power
Thermal fuse has tripped
Battery connector or wires
are loose
Battery is dead
Electrical system is damaged
Motor is damaged
Battery is under charged
Battery is old
Battery is old
Vehicle is overload
Vehicle is being used in harsh
conditions
Poor contact of wires or
connectors
“Dead Spot” on motor
Motor or gears are damaged
Battery low on power
Recharge battery.
Reset fuse, see <Fuse>
Check if the battery connectors are firmly plugged into
each other. If wires are loose around the motor
contact your distributor please.
Check if the battery connectors are firmly plugged into
each other. If wires are loose around the motor,
contact your distributor please.
A dead spot means the electric power is not being
delivered to the terminal connection and the vehicle
needs repair. Contact your distributor please.
Attempting to shift while the
vehicle is moving
Completely stop the vehicle and shift, see <Use Your
Ride-On>
Check if the battery connectors are firmly plugged into
each other when recharging
Replace battery, contact your distributor please.
Replace battery, contact your distributor please.
Replace battery, contact your distributor please.
Reduce weight on vehicle. Maximum user weight is
30 kgs.
Avoid using vehicle in harsh conditions ,see <Safety>.
Recharge battery, contact your distributor please.
Contact your distributor please.
Contact your distributor please.
Contact your distributor please.
Contact your distributor please.
Battery will not
recharge
Charger feels warm
when recharging
Battery connector or adapter
connector is loose
Charger not plugged in
Charger is not working
This is normal and not a
cause for concern
Check if the battery connectors are firmly plugged into
each other.
Check if the battery charger is plugged into a working
wall outlet.
Completely read through this manual and the troubleshooting guide table before calling. If you
still need help resolving the problem Contact your distributor please.
Troubleshooting Guide │14

• It is parents' responsibility to check main parts of the toy before using, Must regularly
examine for potential hazard, such as the battery, charge,cable or cord, plug, screws
are fastening enclosure of other parts and that in the event of such damage, the toy
must not be until that damage had been properly removed.
• Make sure the plastic parts of the vehicle are not cracked or broken.
• Occasionally use a lightweight oil to lubricate moving parts such as wheels.
• Park the vehicle indoors or cover it with a tarp to protect it from wet weather.
• Keep the vehicle away from sources of heat, such as stoves and heaters. Plastic
parts may melt.
• Recharge the battery after each use. Only an adult can handle the battery. Recharge
the battery at least once a month when the vehicle Raider is not being used.
• Do not wash the vehicle with a hose. Do not wash the vehicle with soap and water.
Do not drive the vehicle in rainy or snowy weather. Water will damage the motor,
electric system and battery.
• Clean the vehicle with a soft, dry cloth. To restore shine to plastic parts, use a
non-wax furniture polish. Do not use car wax. Do not use abrasive cleaners.
• Do not drive the vehicle in loose dirt, sand or fine gravel which could damage moving
parts, motors or the electric system.
• When not using, all the electrical source should be turn off. Turn off the power switch
and disconnect the battery connection.
Maintaining │15

Our products are suitable for
ASTM F963; GB6675; EN71 and EN62115 standard.