JLab GO AIR SPORT User manual

We love that you are rocking JLab!
We take pride in our products and fully stand behind them.
GO AIR SPORT EARBUDS
YOUR WARRANTY
All warranty claims are subject to JLab authorization
and at our sole discretion. Retain your proof of
purchase to ensure warranty coverage.
CONTACT US
Reach out to us at [email protected]
or visit jlab.com/contact
Take earbuds out of case and remove stickers.
Place back in case and close door.
ADDING NEW /ADDITIONAL BLUETOOTH DEVICES:
Turn OFF Bluetooth from any previously connected
device. Turn ON Bluetooth from new device.
Take earbuds out of the case.
Earbuds will automatically enter Bluetooth Pairing.
Select “JLab GO Air Sport” in device settings to connect.
BLUETOOTH PAIRING
1
One earbud will blink blue/white indicating
ready to pair to your device.
3
Red light on case indicates charge.
Remove earbuds from case.
2
Select “JLab GO Air Sport” in your device's
Bluetooth settings to connect.
Voice prompt “Bluetooth connected” followed by
blinking white lights will indicate you are connected.
4
Bluetooth
Settings
JLab GO Air Sport
REGISTER TODAY
jlab.com/register
Product updates | How-to tips
FAQs & more
L
I
M
I
T
E
D
T
W
O
Y
E
A
R
W
A
R
R
A
N
T
Y
S
U
P
P
O
R
T
T
E
A
M
#
T
E
A
M
J
L
A
B

Earbuds will power off when placed in the case
and start charging.
Earbuds will auto power on and connect to
your device when removed.
LEFT RIGHT
VOLUME DOWN: Single tap
SIRI (iOS) or “OK GOOGLE”
(ANDROID): Double tap
TRACK BACK: Press & hold 1+ sec
VOLUME UP: Single tap
PLAY / PAUSE: Double tap
TRACK FORWARD: Press & hold 1+ sec
VOICE PROMPTS
“JLab ON”: Power ON
“Ready to Pair”: GO Air Sport is
ready to pair to Bluetooth device
“Bluetooth Connected”:
Earbud is connected to device
“Battery Full”: 100-75%
“Battery Medium”: 75-25%
“Low Battery”: Less than 25%
(When power decreases to 10%,
“Low Battery” will play one time)
“Goodbye”: Power OFF
BUTTON FUNCTIONS
Tap either the right or left earbud 3 times for different EQ settings (GO Air Sport will cycle 3 EQ settings).
CUSTOM EQ3SOUND MODES
JLab SIGNATURE
JLab C3™ signature
sound with amplified
bass and vocals
BALANCED
Even sound with
no additional
enhancements
BASS BOOST
Amplified bass
and sub-bass
CHARGING EARBUDS
1 2
ANSWER CALL: Single tap
HANGUP: Double tap
REJECT INCOMING CALLS: Press & hold 1+ sec
EQ CHANGE: Triple tap
Blinks 4x Red
Case less than 25%
(charge case)
Solid Red
Case 100-25%

FITTING
Connect the GO Air Sport into a computer or USB 5V 1A (or less) output device.
CHARGING CASE
OR
Place hook behind ear.
Rotate and adjust for best fit.
Try all ear tips for best
fit and proper seal.
CAUTIONS
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing the earbuds.
• Wax may build up in the earbud tips, lowering the sound quality.
Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
• If you experience regular discomfort while using this product, discontinue use and consult your physician.
• We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in safe location when not in use.
• The left or right earbud can be used independently for music and
phone calls. Simply choose one and take out of the case to connect.
• Only ONE Bluetooth device can be connected at a time. Turn off
Bluetooth on unwanted devices and turn on Bluetooth on chosen
device to connect.
Fully dry off the earbuds before
putting in the charging case to
avoid any damage to the case.
The earbuds are sweat/water
resistant but the case is not.
QUICK TIPS
WARNING
Shop products |Product alerts |Burn-in your headphones
JLab Store + Burn-in Tool
JLAB.COM
Instructional videos at: JLAB.COM/MANUALS
TROUBLESHOOTING
Connection failure or earbuds disconnected from each other (Manual Reset)
1Keep the earbuds in the charging case and forget “JLab GO Air Sport” from your Bluetooth device settings.
2 Quick tap 7x on one earbud in charging case. Earbud blinks blue 4 times.
3 Quick tap 7x on other earbud in charging case. Earbud blinks blue 4 times.
4Take both earbuds out of the charging case.
One earbud will be solid white and other will blink blue/white indicating ready to pair to your device.
Charging
Blinks Blue
Fully Charged
Solid Blue