JLab JBUDS TALK User manual

JBUDS TALK USB MICROPHONE
ASSEMBLY
SETUP
SETUP JBUDS TALK WITH PC (WINDOWS 7, 8, or 10)
1. From the Start menu, select the Control Panel.
2. From the Control Panel, select the Sound icon.
3. Select the Recording tab and select “JLab JBuds Talk”.
4. Select the Playback tab and select “JLab JBuds Talk”.
SETUP JBUDS TALK WITH MAC (macOS 10.10 or HIGHER)
1. Open System Preferences and select the Sound icon.
2. Select the Input tab and select “JLab JBuds Talk”.
3. Select Output tab and select “JLab JBuds Talk”.
4. From this screen, set the Output volume to desired level.
1 2
We love that you are rocking JLab!
We take pride in our products and fully stand behind them.
YOUR WARRANTY
All warranty claims are subject to JLab authorization
and at our sole discretion. Retain your proof of
purchase to ensure warranty coverage.
CONTACT US
Reach out to us at [email protected]
or visit jlab.com/contact
REGISTER TODAY
jlab.com/register
Product updates | How-to tips
Enter your PC or Mac settings to make sure
connection is established.
Connect to your PC or Mac USB INPUT.
L
I
M
I
T
E
D
T
W
O
Y
E
A
R
W
A
R
R
A
N
T
Y
S
U
P
P
O
R
T
T
E
A
M
#
T
E
A
M
J
L
A
B
BASE
ASSEMBLY
5/8” & 1/4” ASSEMBLY
1/4” INSET
5/8”

CONTROLS
IN USE
LED INTERFACE
1 COLOR FADE
2 COLOR WIPE
3 RAINBOW
4 BLUE
5 PURPLE
6 GREEN
7 CYAN
8 YELLOW
9 ORANGE
10 PINK
11 WHITE
INTERFACE LIST
SWITCH VOLUME/
GAIN CONTROL:
Press and hold
MUTE ON/OFF:
Quick Press
LED INDICATOR
VOLUME
GAIN
MUTE VOLUME/GAIN
WHEEL
RECORDING
SETTING
HEADPHONE
AUX
LED INTERFACE
CONTROL
USB-C
POWER
INPUT
CARDIOID
Record front
OMNI
Record all
surroundings
STEREO
Record front,
left, and right
BIDIRECTIONAL
Record front
and back
TURN ON/OFF
LED INTERFACE:
Press and hold
SWITCH LED
INTERFACE:
Quick Press
Correct
position
Incorrect
position

TIPS /TROUBLESHOOTING
• The JBuds Talk works with almost any recording software installed on macOS, Windows, or Linux. Review in your software’s setting and
adjust accordingly.
• No additional drivers/software are needed for the JBuds Talk. Simply plug in and setup in device settings.
• JBuds Talk will not work through most tablets or mobile phones due to their power limitations. The output power source needs to produce
5v or greater to operate.
• JBuds Talk will not work through a power bank/battery pack. It will only work with USB-A input with an operating system.
• If you are connecting through a USB hub or 3rd party adapter, make sure the product has the correct power output support and
connection support.
• Using external speakers for playback can cause microphone reverberation and echo. It is recommended to use headphones/earbuds for
recording playback if this occurs.
Shop products |Product alerts |Burn-in your headphones
JLab Store + Burn-in Tool
JLAB.COM