JML EZ Bed 109T User manual

Instructions

2
Safety Warnings & Advice
Thank you for purchasing EZ Bed from JML. Please ensure you read these instructions in full
before using your new bed and keep them safe for future reference.
• NEVER unfold or inflate EZ Bed in temperatures below freezing and avoid extensive
exposure to the sun.
•Protectfromcontactwithsharpobjectsandroughground.
•Makesuretohandlethepumpwithcare.
•DANGER- To reduce the risk of electric shock. Always unplug this appliance from the
electrical outlet before cleaning.
• Keepoutofthereachofchildrenatalltimes.
• Thisbedisnotintendedforusebypersons(includingchildren)withreducedphysical,
sensoryormentalcapabilities,oralackofexperienceandknowledge,unlesstheyhave
been given supervision or instruction concerning use by a person responsible for their
safety. Children should be supervised to ensure that they do not play with EZ Bed.
• Usethisapplianceonlyforitsintendeduseasdescribedinthismanual.DO NOT use
attachments unless recommended for use with EZ Bed.
• NEVERoperateEZBedifithasadamagedcordorplug.Ifitisnotworkingproperly,has
beendroppedanddamaged,ordroppedintowater,seekadvicefromcustomerservices
regarding its repair.
• Keepthepowercordawayfromheatedsurfaces.
• NEVERinateoruseEZBedwiththeairopeningsblocked.Keeptheairopeningsfreeof
dust,lint,hairandotherobstructions.
• NEVER droporinsertanyobjectintoanyopening.
• DO NOT use outdoors. For indoor household use only.
•DO NOToperatewhereaerosol(spray)productsarebeingusedorwhereoxygenisbeing
administered.Keepthepumpawayfromammableliquids.Theareawherethepumpis
used should be well ventilated.
• Todisconnect,turnallcontrolstotheoffpositionthenremovetheplugfromtheoutlet.
• Powersupplyforpumpmustbe230VAC.
• DO NOT leave plugged in when unattended.
• DO NOT obstruct the ventilation hole on the pump.
• DO NOT open the pump case - electrical hazard may result.
•DO NOT over-inflate.
• Forproperpumpusage:itisrecommendednottoexceedveminutesofcontinuous
inflation/deflation time. Pump does not turn off automatically.
• IMPORTANT:Yourpumphasbeendesignedwithasafetyfeaturetoavoidoverheating.If
yourpumpstopsworkingduringuse,pleaseallow30minutesbeforeusingagain.
• Incasethepumpoverheatsduetoexcessivecontinuousination/deation,thepower
willautomaticallycut-off.Thepumpcool-downindicatorwillbeon,andwillresettobegin
workingwithin30minutes.Thepumpcool-downindicatorwillbeoff.
• Thepumpincludedinthisairbedisthermallyprotected.

3
Safety Warnings & Advice
• WeadviseregularinspectionoftheEZbedandthatanymaintenancerequirediscarried
out before use.
• Thisisanelectricalproduct.Toavoidriskofre,burns,injury,andshock,itshouldnotbe
played on or placed near where small children can reach it. DO NOT use in or around
water.
• KEEPAWAYFROMFIREANDOTHERHEATSOURCES.
• Makesuretherearenosharpobjects,steps,drops,orbreakableobjectswhereyouintend
to lay out EZ Bed before use.
• Unplugwhennotinuse.
SAVETHESEINSTRUCTIONS.Thisapplianceisdoubleinsulated.Inadouble-insulated
product,twosystemsofinsulationareprovidedinsteadofgrounding.Nogroundingmeans
isprovidedonadouble-insulatedproduct,norisameansforgroundingtobeaddedtothe
product.
Servicingadouble-insulatedproductrequiresextremecareandknowledgeofthesystem,
andistobedoneonlybyfactory-qualiedservicepersonnel.Replacementpartsfora
double-insulated product must be identical to the parts they replace.
NOTE:
• Airbedmaterialmaystretchduringrstuseandmayneedadditionalairtoreachdesired
rmness.
• AirinsideofEZBedmayexpandandcontractwithvaryingtemperatures,potentially
leadingtoreducedpressureinsideofthebed.Ifthisoccurs,simplyaddmoreairusingthe
built-inpumptoachievedesiredrmness.
PUNCTUREREPAIR(Repairkitincluded):
1.First,deatethebedbyfollowingtheinstructionsfordeation.Cleanandrepairthe
affected area thoroughly.
2.Cutapieceofclearpatchmaterial(includedintherepairkit)intoasizethatwillcoverthe
puncture.
3.Applytheself-adhesivepatchovertheaffectedareabypeelingoffthebackingandplacing
stickysidedownonthebed.Rubpatchtoensureadhesion.Allowfourhoursforrepairto
set before attempting to inflate the airbed.

4
UsingyourEZBed
Air bed
Cord
storage
pocket
Pump cool
down indicator
Air inlet
Inflate/deflate
switch
Bed frame
Storage case panel
WARNING: When the zipper on the storgae
caseisnotfullyunzipped,thepanelofthe
storage case is raised off the floor and will
obstruct frame from opening freely. This may
case damage to the bed frame.
Instructions for EZ Bed set-up
WARNING: Make sure to fully unzip the
storage case before inflating so the panel
of the storage case is laid flatly off the
floor. This will prevent damage to the bed
frame and ensure smooth extension of its
storage case.

5
UsingyourEZBed
•Unplugandstorethecordinthecord
storage pocket.
•Theframewillautomaticallyextendfrom
its storage case.
•Pumpdoesnotturnoffautomatically.DO
NOTleaveonformorethanveminutes.
•WhenEZBedreachesdesired
rmness,turnswitchtotheOffposition.
• EZBedisreadyforuse.
3.
4.
5.
•DO NOT set anything on top or around
EZ Bed during inflation.
•EZBedwillexpandtoapproximately9ftin
length and 7ft in width. Clear space
accordingly.
•Plugpumpintoapolarised230VAC
outlet.
•TurnswitchtoInateposition,EZBedwill
begin to inflate.
2.
1. Unzipthestoragecasecompletelybefore
inflation. Make sure the panel of the storage
caseislaidatlyontheoor,thiswillprevent
damage to the bed frame and ensure the
smooth extension out of its storage case.

6
UsingyourEZBed
•Pumpdoesnotturnoffautomatically.
•Whendeationiscompleted,turnswitch
totheOffpositionthenunplugfromthe
power outlet and store cord in the cord
storage pocket.
Zip-up storage case for storage.
Gently lift up the EZ Bed frame by the end
opposite the pump and push it back into its
storage case.
IMPORTANT: Please ensure that the
mattress is completely deflated prior to
folding up to avoid any risk of puncturing.
Handleandwheelsarelocatedonthe
storage case for easy and convenient
transport.
2.
3.
4.
5.
•Cleararea,beddingandanyother
items on top or around EZ Bed prior to
deflation.
•Plugpumpintoapolarised230VACoutlet
•TurnswitchtotheDeateposition.
•Thepumpwillremovetheairinyour
EZ Bed.
1.
Instructions for EZ Bed storage

7
Technical Information
Technical Information
Model number 109T/109F/109Q
Weight limit QUEENSIZEBED 450lbs 204kg Pump EZ111-01
DOUBLESIZEBED 400lbs 181kg Power 220-240˜ 50/60Hz
072A,154W
0.54PSIMAX
SINGLESIZEBED 300lbs 136kg
Guarantee
This product is unconditionally guaranteed for one year against all defects of workmanship
and materials. This guarantee does not affect your statutory rights. If you have any problems
orqueriesaboutthisproductpleasecontactJML.
JMLCustomerHelpline:0800 781 7831
Disposalandtheenvironment
Thisproductiscoveredbythewasteelectricalandelectronicequipment(WEEE)
regulations.Itshouldnotbediscardedwithnormalhouseholdwaste,buttaken
toyourlocalcollectioncentreforrecycling.Forfurtherinformation,pleasecontact
the local authority or approved disposal agency.
ThisproductmaybecoveredunderoneormoreofthefollowingU.S.and/orforeignpatents:U.S.Pat.
Nos.:2,425,162;2,610,119;5,827,052;6,004,116;6,120,264;6,332,760B1;6,457,192;6,581,223;6,679,686
B2;6,722,306B1;6,754,925B1;6,754,926B2;6,763,540;6,793,469;6,990,700B2;7,020,921B2;7,040,347B2;
7,114,207;7,120,955;7,152,265;7,246,394;7,306,694;7,313,837;7,334,274;7,346,950B2;7,365,277;7,475,443;
7,597,123;7,647,662;7,739,760;7,703,160;7,739,763;7,922,461B2;8,024,830B2;8,151,390;8,214,953;RE42,
559E;GB2378987;GB2396670;CN221,800;ZL01129383OthersU.S.andInternationalPatentsPending.

JML
JML House, Regis Road, London NW5 3EG
Tel: 020 7691 3800, Fax: 020 7691 3801
E-mail: [email protected]
Web: www.jmldirect.com
05/13
This manual suits for next models
2
Table of contents
Popular Indoor Furnishing manuals by other brands

iHome
iHome Hollywood Pro iCVBT15 quick start guide

Furniture of America
Furniture of America YNJ-1526C2 Assembly instructions

GERMANIA WERK
GERMANIA WERK 344 quick start guide

Core Products
Core Products Boston BT240 Assembly instructions

Blanco
Blanco STELLAR 441024 Specification sheet

Hussmann
Hussmann Smart Exchange Installation & operation manual