Important Safety Instructions
•Before using the Beauty Wand™, please ensure
you have read the instruction manual carefully.
•Store in a dry place and out of the reach of
children.
•Always make sure children cannot reach the
appliance or any of the attachments.
•DO NOT immerse the main unit in water or
any liquid.
•Make sure attachments are completely dry
before attaching to the main unit.
•Make sure the unit is OFF when changing
attachments.
•Make sure the unit is OFF when changing the
battery.
•Make sure the unit is OFF when cleaning.
•Only turn the unit on when trimming, the unit
should be switched OFF when combing.
•Be careful not to over trim.
•Use caution when trimming near the eyes.
•DO NOT use on eyelashes.
•For external use only.
•Use the appliance for its intended use only.
•Please keep these instructions, the sales receipt,
and if possible, the packaging.
•For dry use only - do not use any shaving foam
etc.
•DO NOT immerse in water.
Using your Beauty Wand™
Hair removal with the Trimming Head
For all designated areas of the body
1Turn the unit on by pushing the
ON/OFF switch upwards.
2ON/OFF light for using with light.
3Place the head directly against the
hair to be removed.
4Move against the direction of hair growth.
Beauty Wand™ Parts
1Beauty Wand™
2Trimming Head
3Shaper
4Styling Detail Trimming Head
5Cleaning Brush
6Battery
7Carry Case
Attaching the Shaper
1Ensure the unit is turned OFF.
2Hold the neck of the main unit.
3Push the large opening on the shaper
down over the main head, (where the
mould on unit aligns with the head),
and click into place.
4It is recommended that, for trimming,
the long side is tested first, if this side is
not satisfactory, use the short side.
Trimming with the Shaper
Gently trim unwanted hair: eyebrows, bikini area,
chin, feet, hands, nose, ears and other facial areas.
1Attach the eyebrow shaper as described
above.
2Turn the unit on by pushing the ON/OFF
switch upwards.
3Comb, following the natural shape of the
eyebrow, from the widest end to the thinnest
end.
4Repeat as necessary for thicker eyebrows.
Grooming with the Shaper
Comb eyebrows, nape of neck and sideburns.
1Ensure the unit is OFF.
2Attach the shaper as detailed above, the short
side is recommended for grooming.
3Keeping the unit switched off, comb,
following the natural shape of the eyebrow,
from the widest end to the thinnest.
Replacing Trimming Head
1Ensure the unit is turned OFF.
2Hold the neck of the main unit.
3Unlock trimmer head from main unit.
4Slot alternative trimmer head into place
and lock.
1
5
2
6
3
7
4
MAIN HEAD
NECK
FOLD LINE FOLD LINE
FOLD LINE FOLD LINE
