JOBO SNAPSCAN 5000 - V1.15 User manual
SnapScan 5000
-Patent pending-
User Manual
Version 1.15
November 2010
-2-
Declaration of Conformity
We declare JOBO International GmbH,
Eintrachtstr. 14,
D-51645 Gummersbach
that the “SnapScan 5000”
complies with the following directives:
EN 55022:2006+A1:2007 Radio interference suppression (ITE).
Limits and methods of measurement
EN 55024:1998/A2:2003 EMC Immunity to Radiated Fields (ITE)
EN61000-3-2:2006 Elektromagnetic Compatibility (EMC-Part 3-2)
EN61000-3-3:2008 Elektromagnetic Compatibility (EMC-Part 3-3)
This declaration of EC conformity shall become null and void when the assembly is
subjected to any modification that has not met with our approval.
Gummersbach, 05. September 2010 Johannes Bockemühl
Geschäftsführer
-3-
Index
1Unpack SnapScan5000 ....................................................4
2Install film into the film holder ....................................6
3Quick Start....................................................................9
4Operation Guide .........................................................14
5Capture......................................................................14
6Film Type...................................................................27
7Setting Mode..............................................................30
8Specification...............................................................33
9Waste Management ......................................................34
10Service .......................................................................35
-4-
1Unpack SnapScan5000
JOBO SnapScan 5000 Negative Holder User Manual
USB power core USB/Video cable Roll Film Holder Clean brush
2 x Rapid slide feeder
-5-
Note
We strongly suggest using a clean, dry, non-alcohol
cotton swab to clean the glass surface periodically
to produce a clear image during operation.
Clean dust from Film Scanner back light, to use the
clean brush to wipe the dust.
Dust or dirt from the negative, slide films and cover
trays may affect the scanned image quality, please
make sure the materials are cleaned before inserting
into the scanner.
Please find recommend, processional purger from photo store to clean the dust on
films if any to avoid damaging the only one copy of old films.
-6-
2Installfilmintothefilmholder
2.1 Insert slides into the rapid slide feeder
1. Put a stack of slides into the feeder
After the slides are placed into the holder
and the holder is placed into the slot of
the scanner (refer to „Quick Start“) the
slides can be slide into the scanner by
moving the holder backward and forward.
The slides are positioned automatically
inside the scanner.
2.2 Install the Negative Film into holder
1. Open the film holder as illustrated
2. Install film into negative film slot 3. Close the film holder
FilmSlot
-7-
2.3 Install the Roll Film into holder:
1. Take out the roll film holder from package
2. Insert roll film into film slot 3. Pull out the roll film in another side
-8-
Note
To avoid mirror image, follow the serial numbers (from left to right) on top of film
when install negative film into holder
If the image is upside down [see fig.2], the image can be corrected by Flip function
in Button of device before capture.
Figure1
Figure2
-9-
3Quick Start
Right/+button
FilmSlot
OKbutton
SDcardSlot
Left/‐button
Powerbutton
USBport
TVoutjack
PowerstatusLED
-10-
1. Put Film onto the film cartridge
2. Insert the film cartridge into JOBO SnapScan 5000
-11-
3. Connect power USB cable to SnapScan 5000
4. Turn on Device by pressing the power button
-12-
5. Press OK button to capture the image
6. Follow the menu on display for scanning
-13-
7. After finished the capture, take out the SD card which stored capture
images
8. Or read picture from PC by MSDC mode
-14-
4OperationGuide
4.1 Home: Main menu
•Capture: capture mode (default)
•Playback: playback mode
•Film Type: define the film type which loaded in cartridge
•USB mode: MSDC (Mass Storage Device Class) mode
•Setting: TV out and format option
5Capture
After welcome page, above menu will remains for 5 sec. User can press up/down button
for desired menu. Or system will auto enter Capture mode if there is no action during
this 5 second period.
Capture
Playback
FilmType
USBmode Setting
Capture
-15-
5.1 Capture: <Up>/<Down> (Button)
•press <Mirror> Button to mirror image from right to left
•Press <Down> button to upside down image
Flipbutton
mirror
Mirrorbutton
-16-
5.2 Capture mode
Once enter capture mode, there will be a red indicator on left top corner to indicate it is
in live view mode. When the film cartridge is inserted into the scanner slot, the image
always shows the positive image according to previous defined Film Type (after power
on. the Film Type is default to negative film). Reconfirm the film position through the
display before press OK button.
5.3 Capture: Edit Menu
•Save: save captured image
•Rotate +90: continue rotate +90 degrees
•Rotate -90: continue rotate -90 degrees
(this is for adjusting the user who took the portrait picture)
•Cancel: cancel any editing with this image
•Home: Back to main menu
Liveviewindicator
(
flashin
g
at0.5secrate
)
Save
Rotate+90
Cancel
Rotate‐90
Home
Selectedimage
-17-
5.4 Live View -> Capture/Edit Menu
Live View Capture/Edit Menu
OK
OK
Once press OK button in live view, the edit menu will be appeared. When user press OK
button again, the current image will be saved into SD card. The display will return to
live view again.
5.5 Capture: Save
Once user press OK button on top of SnapScan 5000, preview (live view) image will be
selected and shown on the TFT which will take between 3-4 second with 4 icons shown
on the left side of the screen. Save icon will be highlighted for user to confirm the
saving by OK button. After the above step, display goes back to live view mode
(preview).
Save
-18-
5.6 Capture: Rotate +/-90 degrees
User can apply the up/down button for further editing (rotate +90/-90). Once user
confirm rotate +90 degrees, they can press the OK button, the image will be rotate +90
degrees and cursor will remain at Save. Press OK button again will save the rotated
image to SD card and screen will return to live view. For continuously rotate +90
degrees, move cursor to rotate again and press OK.
5.7 Capture: Cancel
Or select Cancel and press OK button to cancel any of the editing step with present
selected image and SnapScan 5000 goes to live view mode (nothing will be saved onto
the SD card).
OK
Playback
/capturedimage
-19-
5.8 Capture: Home
Go back to main menu, press OK button when select Home icon.
5.9 Exit from Edit mode back to Capture mode (Live View)
Once User presses OK button for save or cancel option, display will return to capture
mode/live view. Then, user can move the film cartridge to next target film to capture.
Nextimagein
filmcartridge
OK
-20-
5.10 Memory full
Once the internal memory or SD card is full, user can see a SD card full once press OK
button. User has to down load the images to PC or replace another SD card for continue
capture.
5.11 SD card locked
If the SD was locked, once press the OK button, a SD Card locked icon displays on screen.
Please do slide the switch of SD card to unlock before insert into device.
OK
SDcardlocked
indicator
This manual suits for next models
1
Table of contents
Other JOBO Scanner manuals
