
1514
Preparing to cook Using your cooker for the rst time
Control panel functions
1 Check that the parts and the accessories for the lid are well installed.
2 Checktheoatervalveandexhaustvalvearenotjammed.
3 Make sure the sealing ring and block proof cover are well installed.
4 Makesuretheinnerpotisnotoverloaded.Youmustonlyllthe
pot to the ‘Max’ mark. When cooking foods that expand while
cooking,suchasrice,beansordriedvegetables,DONOTllthe
inner pot more than half full. We recommend that you DO NOT
lltheinnerpotovertwothirdsfull.
5 Wipe the external surface of the inner pot to remove spills,
and place the inner pot into the cooker.
6 Turn the inner pot from left to right to ensure good contact with
the heating plate.
7 Turn the exhaust valve to the sealing position. In this position,
the electric pressure cooker maintains a sealed state of pressure.
To manually release the pressure, turn the exhaust valve handle to
the exhaust position. The electric pressure cooker then allows
steam to escape.
8 Whenyouswitchonthepressurecookerforthersttime,
the appliance will be in standby mode.
- When releasing the pressure, DO NOT put your hands or face
abovetheexhaustopening.Makesurethattheoatvalveisinthe
correct position, i.e. not raised, before you start.
- Please ensure the sealing ring is placed correctly. You should be able
to turn the sealing ring in place on the sealing rack by holding
oppositesidesoftheringandmovingyourngers.
- Never pull the sealing ring with force. If you do so, you may deform
the ring and affect the pressure sealing function. If the sealing ring is
damaged or cracked, you must replace it. Contact John Lewis
customer support for help.
We strongly recommend that you test your pressure cooker before
embarking on cooking meals. This helps to ensure that the pressure
cooker’s functions are running appropriately.
1 Open the lid.
2 Check the assembly.
3 Takeouttheinnerpot,andllitwithtwoinchesofwater.
4 Put the pot back into the cooker.
5 Close the lid.
6 Press the Menu button, and use + or - to choose the Steam
function: P04.
7 The program will start automatically in ten seconds if no other
button is pressed.
8 The pressure cooker will beep three times, indicating that the
program is beginning. The display will show the operational running bar.
9 Withinafewminutes,youwillnoticetheoatvalvepopup,
indicating the cooker has obtained the appropriate pressure level.
10 Oncetheprogramhasnished,thecookerwillbeepandgo
automatically into Keep Warm mode. This completes the test run.
11 Press the Keep Warm/Cancel button and unplug the unit. Once
the cooker cools down, you can open the lid and begin to make
your favourite recipe.
Standby mode
- Standby mode is the default setting when the cooker is turned ON.
The control panel shows “--”.
Keep Warm/Power
The Keep Warm/Power button serves a dual purpose.
- When the cooker is in operation, pressing the Keep Warm/Power
button will cancel the selected cooking program and the cooker
will return to standby mode.
- If you press this button when the cooker is in Standby mode,
the cooker will start the Keep Warm function. The cooker will
also automatically go into the Keep Warm mode, and the Keep
Warmindicatorwilllight,whenithasnishedtheselectedcooking
function - the yoghurt program is the only exception.
Delay Timer
Delay Timer mode allows you to delay the start of cooking with both
the Manual setting and the Preset programs. You cannot use the delay
timer for the presets Sauté, Slow cook or Yoghurt.
- Pressing the Delay Timer button will illuminate the Delay Timer
light.Thedisplaywillash2hoursandOminutes(2:00)asdefault.
- Press the Delay Timer button once more if you wish to change
Sealing schematic
diagram
Exhaust schematic
diagram